A facile method to produce TiO2 nanorods for high-efficiency dye solar cells

Tutkimustuotos: Lehtiartikkelivertaisarvioitu

Tutkijat

  • Jingshu Wan
  • Li Tao
  • Baoyuan Wang
  • Jun Zhang
  • Hao Wang
  • Peter Lund

Organisaatiot

  • Hubei University

Kuvaus

Highly ordered TiO2 nanorods are considered promising for photoanodes in dye-sensitized solar cells due to their high charge transfer rate of photo-generated electrons, but they often suffer from low specific area, which may lead to a low conversion efficiency. Here, we produce long vertical single-crystalline rutile TiO2-nanorod arrays on fluorine-doped tin oxide conductive glass substrates(FTO)by the hydrothermal method. To further increase the specific area, the TiO2-nanorod arrays are etched in a secondary hydrothermal process by hydrochloric acid. The etching time have a major effect on the nanorod microstructure and on the dye-sensitized solar cells efficiency. The best result is reached with 8 h of etching, which results in a record high conversion efficiency of 11.14 ± 0.12% (certified efficiency 10.3%) under full sunlight illumination (AM 1.5 G, 100 mW/cm2). The record cell has an open voltage of 0.79 V and a short current density of 21.59 mA/cm2. The proposed manufacturing approach of TiO2 nanorods is highly potential for producing high-efficiency dye-sensitized solar cells.

Yksityiskohdat

AlkuperäiskieliEnglanti
Artikkeli227012
Sivut1-8
JulkaisuJournal of Power Sources
Vuosikerta438
TilaJulkaistu - 31 lokakuuta 2019
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

ID: 36256939