Projekteja vuodessa
Abstrakti
The increased interest in printed electronics necessitates the development of suitable sustainable substrates for them. In this study, the suitability of acetylated cellulose nanofiber (ACNF) films as substrates for printed electronics were examined through (I) the ink-substrates interaction, (II) print quality, and (III) electrical and (IV) mechanical properties of the printed pattern on the ACNF substrates. The results have been compared with cellulose nanofiber (CNF) and commercial reference material (CRM) substrates. The wetting of the silver nanoparticle (AgNP) ink on the ACNF substrate was found out to be excellent. The thickness of the printed pattern increased and the hole area fraction decreased with each consecutive layer of ink. The comparative investigations demonstrated that the electrical properties of the printed patterns were almost as good for 4 layers of ink on the ACNF substrate (1.6 Ω resistance) as the ones on the CRM substrate (1.2 Ω resistance). Additionally, the printed pattern on the ACNF substrate endured the adhesion and bending tests significantly better compared to the CRM substrate. Therefore, this study demonstrates that ACNF substrates could be a suitable candidate for printed electronics, which are more sustainable yet with similar functionalities in comparison with the conventional fossil based substrates.
Alkuperäiskieli | Englanti |
---|---|
Artikkeli | 113230 |
Sivumäärä | 8 |
Julkaisu | Materials & design |
Vuosikerta | 245 |
Varhainen verkossa julkaisun päivämäärä | 13 elok. 2024 |
DOI - pysyväislinkit | |
Tila | Julkaistu - syysk. 2024 |
OKM-julkaisutyyppi | A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä |
Sormenjälki
Sukella tutkimusaiheisiin 'A detailed investigation of acetylated cellulose nanofiber films as a substrate for printed electronics'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.-
WALLPAPER - T40702 Jäntti: Intelligent wallpaper - Enabling sustainable wireless systems with organic electronics
Jäntti, R. (Vastuullinen tutkija), Karakoc, A. (Projektin jäsen), Rimpiläinen, T. (Projektin jäsen) & Xie, B. (Projektin jäsen)
01/01/2023 → 31/12/2025
Projekti: Academy of Finland: Other research funding
-
BESIMAL: Backscatter enabled sustainable monitoring Infrastructure for assisted living (BESIMAL)
Jäntti, R. (Vastuullinen tutkija), Rimpiläinen, T. (Projektin jäsen), Xie, B. (Projektin jäsen), Wiklund, J. (Projektin jäsen), Kerminen, J. (Projektin jäsen), Karakoc, A. (Projektin jäsen), Bai, Y. (Projektin jäsen) & Liao, J. (Projektin jäsen)
01/09/2020 → 31/08/2024
Projekti: Academy of Finland: Other research funding