462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators

Mika Pulkkinen; Jarno Salomaa; Mohammadmehdi Moayer; Tuomas Haapala; Kari Halonen

doi:10.1109/ISCAS.2017.8051005

462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators

Mika Pulkkinen, Jarno Salomaa, Mohammadmehdi Moayer, Tuomas Haapala, Kari Halonen

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

8 Sitaatiot (Scopus)

Abstrakti

This paper presents a 2-axis gesture sensor interface that consumes 462 nW powered by a 0.8 V supply. The system consists of two proximity sensor (PS) interfaces that provide digital data outputs. A single PS interface consists of a capacitively controlled ring oscillator (CCRO) whose frequency is sensitive to the capacitance between two copper plates in a coplanar deployment and additional capacitive load introduced by the presence of a hand. The CCRO in each interface is followed by a modified cascaded integrator comb (CIC) filter that performs the frequency-to-digital conversion, filtering and downsampling. When a total of three sensor plates are arranged in parallel, the middle one acting as a shared ground plate, the location of a user's hand can be obtained in two dimensions. Measurement results show that hand sweep gestures at 6-cm distance from the sensing plates can be detected by a lightweight algorithm.

Alkuperäiskieli	Englanti
Otsikko	2017 IEEE International Symposium on Circuits and Systems (ISCAS) Proceedings
Kustantaja	IEEE
Sivumäärä	4
ISBN (elektroninen)	978-1-4673-6853-7
DOI - pysyväislinkit	https://doi.org/10.1109/ISCAS.2017.8051005
Tila	Julkaistu - 28 syysk. 2017
OKM-julkaisutyyppi	A4 Artikkeli konferenssijulkaisussa
Tapahtuma	IEEE International Symposium on Circuits and Systems - Marriot Waterfront, Baltimore, Yhdysvallat Kesto: 28 toukok. 2017 → 31 toukok. 2017 http://ieeexplore.ieee.org/document/8050249/

Julkaisusarja

Nimi	IEEE International Symposium on Circuits and Systems proceedings
ISSN (elektroninen)	2379-447X

Conference

Conference	IEEE International Symposium on Circuits and Systems
Lyhennettä	ISCAS
Maa/Alue	Yhdysvallat
Kaupunki	Baltimore
Ajanjakso	28/05/2017 → 31/05/2017
www-osoite	http://ieeexplore.ieee.org/document/8050249/

Pääsy asiakirjaan

10.1109/ISCAS.2017.8051005

Aalto Electronics-ICT
Ryynänen, J. (Manager)
Elektroniikan ja nanotekniikan laitos
Laitteistot/tilat: Facility

Siteeraa tätä

@inproceedings{f55151a7648e464a9fa8f7460a095c80,

title = "462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators",

abstract = "This paper presents a 2-axis gesture sensor interface that consumes 462 nW powered by a 0.8 V supply. The system consists of two proximity sensor (PS) interfaces that provide digital data outputs. A single PS interface consists of a capacitively controlled ring oscillator (CCRO) whose frequency is sensitive to the capacitance between two copper plates in a coplanar deployment and additional capacitive load introduced by the presence of a hand. The CCRO in each interface is followed by a modified cascaded integrator comb (CIC) filter that performs the frequency-to-digital conversion, filtering and downsampling. When a total of three sensor plates are arranged in parallel, the middle one acting as a shared ground plate, the location of a user's hand can be obtained in two dimensions. Measurement results show that hand sweep gestures at 6-cm distance from the sensing plates can be detected by a lightweight algorithm.",

author = "Mika Pulkkinen and Jarno Salomaa and Mohammadmehdi Moayer and Tuomas Haapala and Kari Halonen",

year = "2017",

month = sep,

day = "28",

doi = "10.1109/ISCAS.2017.8051005",

language = "English",

series = "IEEE International Symposium on Circuits and Systems proceedings",

publisher = "IEEE",

booktitle = "2017 IEEE International Symposium on Circuits and Systems (ISCAS) Proceedings",

address = "United States",

note = "IEEE International Symposium on Circuits and Systems , ISCAS ; Conference date: 28-05-2017 Through 31-05-2017",

url = "http://ieeexplore.ieee.org/document/8050249/",

}

Pulkkinen, M, Salomaa, J , Moayer, M, Haapala, T & Halonen, K 2017, 462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators. julkaisussa 2017 IEEE International Symposium on Circuits and Systems (ISCAS) Proceedings. IEEE International Symposium on Circuits and Systems proceedings, IEEE, IEEE International Symposium on Circuits and Systems , Baltimore, Maryland, Yhdysvallat, 28/05/2017. https://doi.org/10.1109/ISCAS.2017.8051005

462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators. / Pulkkinen, Mika; Salomaa, Jarno ; Moayer, Mohammadmehdi et al.
2017 IEEE International Symposium on Circuits and Systems (ISCAS) Proceedings. IEEE, 2017. (IEEE International Symposium on Circuits and Systems proceedings).

Tutkimustuotos: Artikkeli kirjassa/konferenssijulkaisussa › Conference article in proceedings › Scientific › vertaisarvioitu

TY - GEN

T1 - 462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators

AU - Pulkkinen, Mika

AU - Salomaa, Jarno

AU - Moayer, Mohammadmehdi

AU - Haapala, Tuomas

AU - Halonen, Kari

PY - 2017/9/28

Y1 - 2017/9/28

N2 - This paper presents a 2-axis gesture sensor interface that consumes 462 nW powered by a 0.8 V supply. The system consists of two proximity sensor (PS) interfaces that provide digital data outputs. A single PS interface consists of a capacitively controlled ring oscillator (CCRO) whose frequency is sensitive to the capacitance between two copper plates in a coplanar deployment and additional capacitive load introduced by the presence of a hand. The CCRO in each interface is followed by a modified cascaded integrator comb (CIC) filter that performs the frequency-to-digital conversion, filtering and downsampling. When a total of three sensor plates are arranged in parallel, the middle one acting as a shared ground plate, the location of a user's hand can be obtained in two dimensions. Measurement results show that hand sweep gestures at 6-cm distance from the sensing plates can be detected by a lightweight algorithm.

AB - This paper presents a 2-axis gesture sensor interface that consumes 462 nW powered by a 0.8 V supply. The system consists of two proximity sensor (PS) interfaces that provide digital data outputs. A single PS interface consists of a capacitively controlled ring oscillator (CCRO) whose frequency is sensitive to the capacitance between two copper plates in a coplanar deployment and additional capacitive load introduced by the presence of a hand. The CCRO in each interface is followed by a modified cascaded integrator comb (CIC) filter that performs the frequency-to-digital conversion, filtering and downsampling. When a total of three sensor plates are arranged in parallel, the middle one acting as a shared ground plate, the location of a user's hand can be obtained in two dimensions. Measurement results show that hand sweep gestures at 6-cm distance from the sensing plates can be detected by a lightweight algorithm.

U2 - 10.1109/ISCAS.2017.8051005

DO - 10.1109/ISCAS.2017.8051005

M3 - Conference article in proceedings

T3 - IEEE International Symposium on Circuits and Systems proceedings

BT - 2017 IEEE International Symposium on Circuits and Systems (ISCAS) Proceedings

PB - IEEE

T2 - IEEE International Symposium on Circuits and Systems

Y2 - 28 May 2017 through 31 May 2017

ER -

462-nW 2-axis gesture sensor interface based on capacitively controlled ring oscillators

Abstrakti

Julkaisusarja

Conference

Pääsy asiakirjaan

Sormenjälki

Laitteet

Aalto Electronics-ICT

Siteeraa tätä