1981 …2020

Tutkimustuotoksia vuodessa

Jos olet muokannut tietoja Puressa, ne näkyvät pian tässä.

Tutkimustuotos

Suodatin
Working paper
2010

Power limits of high-speed permanent-magnet electrical machines for compressor applications

Kolondzovski, Z., Arkkio, A., Larjola, J. & Sallinen, P., 2010, Helsinki, (Reports on Electromechanics; nro 76).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2009

A Mesh-Free Model of Eddy-Current Losses for 2D Analysis of Ferromagnetic Laminations

Rasilo, P. & Arkkio, A., 2009, (17th Conference on the Computation of Electromagnetic Fields, Florianópolis, Brazil, 22.-26.11.2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Axial Magnetic Flux and Eddy-Current Loss in Core Ends of a Large Induction Machine

Lin, R., Haavisto, A. & Arkkio, A., 2009, (17th International Conference on the Computation of Electromagnetic Fields (COMPUMAG 2009), Florianópolis, Santa Catarina, Brazil, Nov.22-26, 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Dependence of hysteresis and eddy-current losses on the excitation frequency and the analysis of losses in inverter-fed electric machines

Dlala, E., Belahcen, A., Pippuri, J. & Arkkio, A., 2009, s. C1-11, (SMM, Italy, 6-9 Sep. 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Eddy-current Losses and Temperature Rise in the Form-wound Stator Winding of an Inverter-fed Cage Induction Motor

Huynh Van, K., Islam, M. J., Repo, A-K. & Arkkio, A., 2009, Brazil, s. 209-210, ('The 17th Conference on the Computation of Electromagnetic Fields' Florianopolis, Brazil, Nov 22-26, 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

FEM for directly coupled magneto-mechanical phenomena in electrical machinesKatarzyna

Fonteyn, K., Belahcen, A., Kouhia, R. & Arkkio, A., 2009, s. 87-88, (Compumag 2009, Florianopolis, Brasil, November 22nd-26th 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Finite-element analysis for a rolling-rotor electrical machine

Arkkio, A., Biernat, A., Bucki, B., Kaminski, G., Niemenmaa, A., Smak, A. & Staszewski, P., 2009, Florianopolis, Brazil, s. 191-192, (17 Conference on the Computation of Electromagnetic Fields, Florianópolis, Brazil, 22-26 November , 2009.).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Finite-element analysis of eddy currents in the form-wound stator and rotor winding of a doubly-fed induction generator

Islam, M. J. & Arkkio, A., 2009, Espoo, (Reports on Electromechanics; nro 75).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Inclusion of Eddy Currents in Laminations in Two-Dimensional Finite Element Analysis

Pippuri, J., Belahcen, A., Dlala, E. & Arkkio, A., 2009, (The 17th Conference on the Computation of Electromagnetic Fields (Compumag 2009), Florianópolis, Brazil, November 22-26, 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Modelling motion, stiffness and damping of a permanent-magnet shaft coupling

Niemenmaa, A., Salmia, L., Arkkio, A. & Saari, J., 2009, Floranopolis, Brazil, s. 993-994, (17th Conference on the Computation of Electromagnetic Fields, Florianopolis, Brazil, 22-26 November, 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

On the Importance of Incorporating Iron Losses in the Magnetic Field Solution of Electrical Machines

Dlala, E., Belahcen, A. & Arkkio, A., 2009, s. PC2-8, (Compumag, Brazil, 22-26 Nov. 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Unified Scheme for Implementing the Fixed-Point and Newton-Raphson Methods in Finite-Element Programs of Electromagnetic Field Problems

Dlala, E. & Arkkio, A., 2009, s. PA6-16, (Compumag, Florianopolis, Brazil, 22-26 November 2009).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2008

Challenges in the segregation of losses in cage induction machines

Pippuri, J. & Arkkio, A., 2008, s. Paper ID 1445, 5 p., (XVIII International Conference on Electrical Machines, Vilamoura, Portugal, 69 September 2008).

Tutkimustuotos: TyöpaperiWorking paperProfessional

10 Sitaatiot (Scopus)

Finite-element discretiztion for analyzing eddy currents in the form-wound stator winding of a cage induction motor

Islam, M. J. & Arkkio, A., 2008, s. 57-58, (The 7th International Conference on Scientific Computing in Electrical Engineering, September 28- October 3, 2008, Helsinki University of Technology, Espoo, Finland).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2007

Active Magnetic Bearings

Arkkio, A., Lantto, E. & Tommila, V., 2007, Espoo, s. 130, (Lecture Series of Laboratory of Electromechanics; nro 19).

Tutkimustuotos: TyöpaperiWorking paperProfessional

A Fast Fixed-Point Method for Solving Nonlinear Field Problems in Time-Stepping Analysis

Dlala, E., Belahcen, A. & Arkkio, A., 2007, Aachen, Germany, s. PC2-5, (International Conference on the Computation of Electromagnetic Fields (Compumag), Aachen, Germany, Jun. 2007.).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Comprehensive Dynamic Loss-Model of Electrical Steel Applied to FE Simulation of Electrical Machines

Belahcen, A. & Arkkio, A., 2007, Aachen, Germany, s. on CD, (COMPUMAG 2007, The 16th Conference on the Computation of Electromagnetic fields, Aachen, Germany, June 24 28, 2007).

Tutkimustuotos: TyöpaperiWorking paperProfessional

30 Sitaatiot (Scopus)

Efficient magnetodynamic lamination model for two-dimensional field simulation of rotating electrical machines

Dlala, E., Belahcen, A. & Arkkio, A., 2007, Cardiff, s. J-013, (International Conference on Soft Magnetic Materials (SMM), Cardiff, Sep. 2007).

Tutkimustuotos: TyöpaperiWorking paperProfessional

16 Sitaatiot (Scopus)

Identification of electromagnetic torque model for induction machines with numerical magnetic field solution

Repo, A-K., Rasilo, P., Niemenmaa, A. & Arkkio, A., 2007, Aachen, Saksa, s. 31-32, (Compumag 2007, Aachen, 24.6.-28.6.2007).

Tutkimustuotos: TyöpaperiWorking paperProfessional

8 Sitaatiot (Scopus)

Laboratory of Electromechanics, Annual Report 2006

Schröder, M. & Arkkio, A., 2007, Espoo, s. 22, (Helsinki University of Technology, Laboratory of Electromechanics; nro report).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Mitigation of UMP Components by the Parallel Stator Windings in Eccentric-rotor Electrical Machines

Burakov, A. & Arkkio, A., 2007, s. 1638-1642, (The IEEE International Electric Machines and Drives Conference Antalya, Turkey, May 3-5, 2007).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2 Sitaatiot (Scopus)

Vibrations of Electrical Machines

Holopainen, T., Roivainen, J., Nordmann, R. & Arkkio, A., 2007, Espoo, s. 207, (Lecture Series of Laboratory of Electromechanics; nro 20).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2006

A comparative investigation of electrical parameters for fault detection and condition monitoring in induction motors - stator winding current and electromagnetic flux

Negrea, M., Jover, P. & Arkkio, A., 2006, Athens, GREECE, s. on CD, (XVII International Conference on Electrical Machines ICEM Chania, Crete Island, Greece, September 2 5, 2006).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Analysis of Hysteresis Torque in a High-Speed Induction Motor

Dlala, E. & Arkkio, A., 2006, s. OF1-3, (International conference on electromagnetic field computation (CEFC) May 2006, Miami, Fl, USA).

Tutkimustuotos: TyöpaperiWorking paperProfessional

A simplified online technique for the detection of eccentricity in induction motors

Jover Rodriguez, P., Antonino-Daviu, J., Muñoz, E. & Arkkio, A., 2006, s. on CD, (International Conference on Electrical Machines. 25 September 2006, Chania, Greece).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Circulating currents in the parallel stator conductors of Electrical machines

Islam, M. J. & Arkkio, A., 2006, s. on CD, (ICEM 2006, XVII International conference on electrical machines, Chania, Crete Island, Greece September 2-5, 2006).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Combined 2D - 1D Time-Harmonic Model for Analysis of Rotating Electrical Machines

Pippuri, J. & Arkkio, A., 2006, s. on CD-rom, (XVII International Conference on Electrical Machines ICEM 2006, Chania, Crete, Greece, 2. - 5.9.2006).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Coupled Field-Circuit Problems in Electric Power Engineering

Arkkio, A., Kanerva, S., Repo, A-K. & Szucs, A., 2006, Espoo, s. 78, (Lecture Series ISSN 1455-2485; nro 17).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Local Magneto-Mechanical Coupling in Electrical Machines

Belahcen, A. & Arkkio, A., 2006, Miami, Florida, USA, s. 386, (CEFC 2006, The twelfth biennial IEEE conference on electromagnetic field computation, Miami, Florida, USA, April 30th, May 3rd, 2006).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Numerical Calculation of Eddy-Current Losses for Different Rotor Structures of High-Speed Permanent Magnet Machine

Kolondzovski, Z., Belahcen, A. & Arkkio, A., 2006, Graz, s. 289-294, (12-th International IGTE Symposium, Graz, Austria, 18-20 September, 2006).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Validity of Numerical Impulse Response Test in Studying Unbalanced Magnetic Pull in Electrical Machines with Parallel Stator Windings

Burakov, A. & Arkkio, A., 2006, s. on CD, (International Conference on Electrical Machines, September 2-5 2006, Chania, Crete Island, Greece).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Wavelet analysis for the detection of inter-turn short-circuits and broken rotor bars in induction machines

Antonino-Daviu, J., Jover Rodríguez, P., Riera-Guasp, M., Arkkio, A. & Roger-Folch, J., 2006, s. on CD, (International Conference on Electrical Machines. 25 September 2006, Chania, Greece.).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2005

A Neuro-Fuzzy-Based Preisach Approach on Hysteresis Modeling

Dlala, E. & Arkkio, A., 2005, Hungary, s. 38-39, (The 5th International Symposium on Hysteresis and Micromagnetic Modeling (HMM-2005), Budapest, Hungary, 30 May - 1 June, 2005).

Tutkimustuotos: TyöpaperiWorking paperProfessional

10 Sitaatiot (Scopus)

A simplified predictive filter-fuzzy logic method for induction motor condition monitoring

Jover, P., Negrea, M., Arkkio, A. & Muñoz, E., 2005, (ISEF 2005 - XII International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering Baiona, Spain, September 15-17, 2005).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Fault Diagnostics for Electrical Machines

Arkkio, A., Hyötyniemi, H., Jover, P., Kokko, V., Lindh, T. & Negrea, M., 2005, Helsinki, s. 138, (Lecture Series of Laboratory of Electromechanics; nro 15).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Losses, Cooling and Thermal Analysis of Electrical Machines

Downing, S., Reunanen, A., Saari, J. & Arkkio, A., 2005, Espoo, (Helsinki University of Technology Department of Electrical and Communications Engineering Laboratory of Electromechanics; nro Lecture series 16).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2004

An Analytical Model of Slip-Ring Induction Machines Including Magnetic Saturation and Rotor Position Angle

Pippuri, J. & Arkkio, A., 2004, s. on CD number 646, (16th International Conference on Electrical Machines Krakova, Puola, 5-8 syyskuuta 2004).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Combined solution of electromagnetic field and circuit equations in modelling the exitation control of synchronous generator

Repo, A-K. & Arkkio, A., 2004, s. on Cd number 645, (16th International Conference on Electrical Machines Krakova, Puola, 5-8 syyskuuta 2004).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Electromechanical Interactions in Electrical Machines

Arkkio, A., Belahcen, A., Holopainen, T., Kurronen, P., Laurila, L., Saren, H. & Sopanen, J., 2004, Espoo, s. 189, (Lecture Series of Laboratory of Electromechanics; nro 14).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Frequency-Dependence of Magnetisation of a Slip-Ring Induction Generator

Lin, R. & Arkkio, A., 2004, Lotz, Poland, (International conference on Electrical machines, Krakova, Puola, 5-8.9.2004).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Mechanical Model for Study Induction Motor Under Fault Condition

Jover, P., Negrea, M. & Arkkio, A., 2004, s. 675-677, (16th International Conference on Electrical Machines, ICEM 2004. Cracow, Poland. 5-8 September 2004).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Mechanical Model to Study Induction Motor Under Fault Conditions

Jover, P., Negrea, M. & Arkkio, A., 2004, s. on CD number 100, (16th International Conference on Electrical Machines Krakova, Puola, 5-8 syyskuuta 2004).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Modelling of Magnetic Materials

Arkkio, A., Belahcen, A., Ivanyi, A., Saitz, J. & Suorsa, I., 2004, Espoo, s. 248, (Lecture Series of Laboratory of Electromechanics; nro 13).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Vibration measurements for validation of electromechanical rotor model for cage induction motor Vibration measurements for validation of electromechanical rotor model for cage induction motor

Holopainen, T., Aatola, S. & Arkkio, A., 2004, Suffolk, UK, s. 423, (Eighth International Conference on Vibrations in Rotating Machinery, Swansea, UK, 7-9 September, 2004).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2003

Effects of saturation on the forces in induction motors with whirling cage rotor

Tenhunen, A., Holopainen, T. & Arkkio, A., 2003, Saratoga Springs, NY, USA, s. 66-67, (Compumag'03, Saratoga Springs, NY, USA, 13-17.7.2003).

Tutkimustuotos: TyöpaperiWorking paperProfessional

22 Sitaatiot (Scopus)

Simulation of Electric Drive Systems with Coupled Finite Element Analysis and System Simulator

Kanerva, S., Seman, S. & Arkkio, A., 2003, s. 22-36, (10th European Conference on Power Electronics and Applications (EPE 2003), Toulouse, France 2-4 September 2003).

Tutkimustuotos: TyöpaperiWorking paperProfessional

2002

Comparison of reconstruction schemes of multiple SVM s applied to fault classification of a cage induction motor

Pöyhönen, S., Negrea, M., Arkkio, A. & Hyötyniemi, H., 2002, Helsinki, Finland, s. 19, (Helsinki University of Technology, Control Engineering Laboratory; nro Report 130).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Design of Synchronous PM Motor for Submersed Marine Propulsion Systems

Arkkio, A., Bianchi, N., Bolognani, S., Jokinen, T., Luise, F. & Rosu, M., 2002, s. paper 523, (15th International Conference on Electrical Machines, Brugge, Belgium, 25-28 August 2002).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Electromechanical interaction in rotor vibrations of electric machines

Holopainen, T., Tenhunen, A. & Arkkio, A., 2002, Vienna, s. 10, (The 5th World Congress on Computational Mechanics (WCCM V), Vienna, Austria, 7-12 July, 2002).

Tutkimustuotos: TyöpaperiWorking paperProfessional

Numerical identification of the electromagnetic force parameters for cage rotor from impule response

Tenhunen, A., Holopainen, T. & Arkkio, A., 2002, Perugia, Italy, s. 109, (10th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), Perugia, Italy, 16 - 19.6.2002).

Tutkimustuotos: TyöpaperiWorking paperProfessional