Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant

  • Jan Akmal (Creator)
  • Mika Salmi (Creator)
  • Björn Hemming (Creator)
  • Linus Teir MIKES-National Metrology Institute of Finland, VTT Technical Research Centre of Finland (Creator)
  • Anni Suomalainen University of Helsinki, Helsinki University Central Hospital (Creator)
  • Mika Kortesniemi University of Helsinki, Helsinki University Central Hospital (Creator)
  • Jouni Partanen (Creator)
  • Antti Lassila (Creator)

Tietoaineisto

Description

This data belongs to the original scientific article that is “Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant” by Jan Sher Akmal, Mika Salmi, Björn Hemming, Linus Teir, Anni Suomalainen, Mika Kortesniemi, Jouni Partanen, and Antti Lassila published with MDPI in Applied Sciences (Switzerland) Special Issue — 3D Printing of Bioactive Medical Device . It contains medical CT-images of a sus domesticus acquired using a Siemens Somatom Definition Edge CT system.

Please cite the original scientific article if you use this data as follows:
Akmal, J.S.; Salmi, M.; Hemming, B.; Teir, L.; Suomalainen, A.; Kortesniemi, M.; Partanen, J.; Lassila, A. Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant. Appl. Sci. 2020, 10, 2968. https://doi.org/10.3390/app10082968
Koska saatavilla12 huhtikuuta 2020
Tietojen luontipäivämäärä13 lokakuuta 2016

Siteeraa tätä