Towards printed millimeter-wave components: Material characterization

Subash Khanal; Vasilii Semkin; Viktar Asadchy; Juha Ala-Laurinaho; Ari Alastalo; Asko  Sneck; Tapio Mäkelä; Sergei Tretyakov; Antti Räisänen

doi:10.1109/GSMM.2016.7500324

Towards printed millimeter-wave components: Material characterization

Subash Khanal
, Vasilii Semkin
, Viktar Asadchy
, Juha Ala-Laurinaho
, Ari Alastalo
, Asko Sneck
, Tapio Mäkelä
, Sergei Tretyakov
, Antti Räisänen

VTT Technical Research Centre of Finland

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

5 Citations (Scopus)

56 Downloads (Pure)

Abstract

This paper presents the results from evaluation of suitable materials and ink properties for printing millimeter wave components. Dielectric parameters (relative permittivity and loss tangent) of various potential substrate materials are extracted from S-parameter measurements and simulations. Test samples have been printed over Polyethylene Terephthalate (PET) and Polyethylene Naphthalate (PEN) substrates and the measurement of the ink properties have been carried out.

Original language	English
Title of host publication	2016 Global Symposium on Millimeter Waves, GSMM 2016 and ESA Workshop on Millimetre-Wave Technology and Applications
Publisher	IEEE
ISBN (Electronic)	9781509013487
DOIs	https://doi.org/10.1109/GSMM.2016.7500324
Publication status	Published - 27 Jun 2016
MoE publication type	A4 Conference publication
Event	9th Global Symposium on Millimeter-Waves (GSMM) & 7th ESA Workshop on Millimetre-Wave Technology and Applications - Aalto University, Espoo, Finland Duration: 6 Jun 2016 → 8 Jun 2016 http://gsmm2016.aalto.fi/

Conference

Conference	9th Global Symposium on Millimeter-Waves (GSMM) & 7th ESA Workshop on Millimetre-Wave Technology and Applications
Abbreviated title	GSMM
Country/Territory	Finland
City	Espoo
Period	06/06/2016 → 08/06/2016
Internet address	http://gsmm2016.aalto.fi/

Keywords

loss tangent
material characterization
mm-wave
printing
relative permittivity

Access to Document

10.1109/GSMM.2016.7500324

Towards printed millimeter-wave components Material characterizationAccepted author manuscript, 630 KB

Cite this

Khanal, S., Semkin, V., Asadchy, V., Ala-Laurinaho, J., Alastalo, A., Sneck, A., Mäkelä, T., Tretyakov, S., & Räisänen, A. (2016). Towards printed millimeter-wave components: Material characterization. In 2016 Global Symposium on Millimeter Waves, GSMM 2016 and ESA Workshop on Millimetre-Wave Technology and Applications Article 7500324 IEEE. https://doi.org/10.1109/GSMM.2016.7500324

@inproceedings{307b14d3523d47329a9facaab159f86b,

title = "Towards printed millimeter-wave components: Material characterization",

abstract = "This paper presents the results from evaluation of suitable materials and ink properties for printing millimeter wave components. Dielectric parameters (relative permittivity and loss tangent) of various potential substrate materials are extracted from S-parameter measurements and simulations. Test samples have been printed over Polyethylene Terephthalate (PET) and Polyethylene Naphthalate (PEN) substrates and the measurement of the ink properties have been carried out.",

keywords = "loss tangent, material characterization, mm-wave, printing, relative permittivity",

author = "Subash Khanal and Vasilii Semkin and Viktar Asadchy and Juha Ala-Laurinaho and Ari Alastalo and Asko Sneck and Tapio M{\"a}kel{\"a} and Sergei Tretyakov and Antti R{\"a}is{\"a}nen",

year = "2016",

month = jun,

day = "27",

doi = "10.1109/GSMM.2016.7500324",

language = "English",

booktitle = "2016 Global Symposium on Millimeter Waves, GSMM 2016 and ESA Workshop on Millimetre-Wave Technology and Applications",

publisher = "IEEE",

address = "United States",

note = "9th Global Symposium on Millimeter-Waves (GSMM) \& 7th ESA Workshop on Millimetre-Wave Technology and Applications, GSMM ; Conference date: 06-06-2016 Through 08-06-2016",

url = "http://gsmm2016.aalto.fi/",

}

Khanal, S, Semkin, V, Asadchy, V , Ala-Laurinaho, J, Alastalo, A, Sneck, A, Mäkelä, T, Tretyakov, S & Räisänen, A 2016, Towards printed millimeter-wave components: Material characterization. in 2016 Global Symposium on Millimeter Waves, GSMM 2016 and ESA Workshop on Millimetre-Wave Technology and Applications., 7500324, IEEE, 9th Global Symposium on Millimeter-Waves (GSMM) & 7th ESA Workshop on Millimetre-Wave Technology and Applications, Espoo, Finland, 06/06/2016. https://doi.org/10.1109/GSMM.2016.7500324

Towards printed millimeter-wave components: Material characterization. / Khanal, Subash; Semkin, Vasilii; Asadchy, Viktar et al.
2016 Global Symposium on Millimeter Waves, GSMM 2016 and ESA Workshop on Millimetre-Wave Technology and Applications. IEEE, 2016. 7500324.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Towards printed millimeter-wave components

T2 - 9th Global Symposium on Millimeter-Waves (GSMM) & 7th ESA Workshop on Millimetre-Wave Technology and Applications

AU - Khanal, Subash

AU - Semkin, Vasilii

AU - Asadchy, Viktar

AU - Ala-Laurinaho, Juha

AU - Alastalo, Ari

AU - Sneck, Asko

AU - Mäkelä, Tapio

AU - Tretyakov, Sergei

AU - Räisänen, Antti

PY - 2016/6/27

Y1 - 2016/6/27

N2 - This paper presents the results from evaluation of suitable materials and ink properties for printing millimeter wave components. Dielectric parameters (relative permittivity and loss tangent) of various potential substrate materials are extracted from S-parameter measurements and simulations. Test samples have been printed over Polyethylene Terephthalate (PET) and Polyethylene Naphthalate (PEN) substrates and the measurement of the ink properties have been carried out.

AB - This paper presents the results from evaluation of suitable materials and ink properties for printing millimeter wave components. Dielectric parameters (relative permittivity and loss tangent) of various potential substrate materials are extracted from S-parameter measurements and simulations. Test samples have been printed over Polyethylene Terephthalate (PET) and Polyethylene Naphthalate (PEN) substrates and the measurement of the ink properties have been carried out.

KW - loss tangent

KW - material characterization

KW - mm-wave

KW - printing

KW - relative permittivity

UR - https://www.scopus.com/pages/publications/84979599705

U2 - 10.1109/GSMM.2016.7500324

DO - 10.1109/GSMM.2016.7500324

M3 - Conference article in proceedings

AN - SCOPUS:84979599705

BT - 2016 Global Symposium on Millimeter Waves, GSMM 2016 and ESA Workshop on Millimetre-Wave Technology and Applications

PB - IEEE

Y2 - 6 June 2016 through 8 June 2016

ER -

Towards printed millimeter-wave components: Material characterization

Abstract

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this