Towards a better energy efficiency through a systems approach in an industrial forklift system

Tatiana A. Minav; Thomas Schimmel; Kirill Murashko; Rafael Åman; Juha J. Pyrhönen; Matti Pietola

doi:10.1177/0954407014539672

Towards a better energy efficiency through a systems approach in an industrial forklift system

Tatiana A. Minav^*, Thomas Schimmel, Kirill Murashko, Rafael Åman, Juha J. Pyrhönen, Matti Pietola

^*Corresponding author for this work

Research output: Contribution to journal › Article › Scientific › peer-review

6 Citations (Scopus)

Abstract

The purpose of this study is to improve the potential energy recovery to electric energy in an electrohydraulic forklift system. The initial result achieved for the energy saving ratio after structural optimization is 40%. Component optimization is applied to the tested drive; this consists of an electric servomotor with direct torque control which is directly running a reversible hydraulic pump. According to the study, the energy efficiency and the energy recovery from the electrohydraulic forklift system can be increased by 11%. New ideas and directions for further research were obtained during the study.

Original language	English
Pages (from-to)	273-282
Number of pages	10
Journal	Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering
Volume	229
Issue number	3
DOIs	https://doi.org/10.1177/0954407014539672
Publication status	Published - 13 Feb 2015
MoE publication type	A1 Journal article-refereed

Keywords

efficiency
Electric
electric vehicle
goods vehicles and trucks
hybrid
off-road vehicles

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1177/0954407014539672

Cite this

@article{913ed68f04434bdca63f28128cce3311,

title = "Towards a better energy efficiency through a systems approach in an industrial forklift system",

abstract = "The purpose of this study is to improve the potential energy recovery to electric energy in an electrohydraulic forklift system. The initial result achieved for the energy saving ratio after structural optimization is 40%. Component optimization is applied to the tested drive; this consists of an electric servomotor with direct torque control which is directly running a reversible hydraulic pump. According to the study, the energy efficiency and the energy recovery from the electrohydraulic forklift system can be increased by 11%. New ideas and directions for further research were obtained during the study.",

keywords = "efficiency, Electric, electric vehicle, goods vehicles and trucks, hybrid, off-road vehicles",

author = "Minav, {Tatiana A.} and Thomas Schimmel and Kirill Murashko and Rafael {\AA}man and Pyrh{\"o}nen, {Juha J.} and Matti Pietola",

year = "2015",

month = feb,

day = "13",

doi = "10.1177/0954407014539672",

language = "English",

volume = "229",

pages = "273--282",

journal = "Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering",

issn = "0954-4070",

publisher = "Sage Publishing",

number = "3",

}

Towards a better energy efficiency through a systems approach in an industrial forklift system. / Minav, Tatiana A.; Schimmel, Thomas; Murashko, Kirill et al.
In: Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, Vol. 229, No. 3, 13.02.2015, p. 273-282.

Research output: Contribution to journal › Article › Scientific › peer-review

TY - JOUR

T1 - Towards a better energy efficiency through a systems approach in an industrial forklift system

AU - Minav, Tatiana A.

AU - Schimmel, Thomas

AU - Murashko, Kirill

AU - Åman, Rafael

AU - Pyrhönen, Juha J.

AU - Pietola, Matti

PY - 2015/2/13

Y1 - 2015/2/13

N2 - The purpose of this study is to improve the potential energy recovery to electric energy in an electrohydraulic forklift system. The initial result achieved for the energy saving ratio after structural optimization is 40%. Component optimization is applied to the tested drive; this consists of an electric servomotor with direct torque control which is directly running a reversible hydraulic pump. According to the study, the energy efficiency and the energy recovery from the electrohydraulic forklift system can be increased by 11%. New ideas and directions for further research were obtained during the study.

AB - The purpose of this study is to improve the potential energy recovery to electric energy in an electrohydraulic forklift system. The initial result achieved for the energy saving ratio after structural optimization is 40%. Component optimization is applied to the tested drive; this consists of an electric servomotor with direct torque control which is directly running a reversible hydraulic pump. According to the study, the energy efficiency and the energy recovery from the electrohydraulic forklift system can be increased by 11%. New ideas and directions for further research were obtained during the study.

KW - efficiency

KW - Electric

KW - electric vehicle

KW - goods vehicles and trucks

KW - hybrid

KW - off-road vehicles

UR - http://www.scopus.com/inward/record.url?scp=84922519734&partnerID=8YFLogxK

U2 - 10.1177/0954407014539672

DO - 10.1177/0954407014539672

M3 - Article

AN - SCOPUS:84922519734

SN - 0954-4070

VL - 229

SP - 273

EP - 282

JO - Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering

JF - Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering

IS - 3

ER -

Towards a better energy efficiency through a systems approach in an industrial forklift system

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this