Projects per year
Abstract
The 5th generation (5G) cellular networks offer high speeds, low latency, and greater capacity, but they face greater penetration loss through buildings than 4G due to their higher frequency bands. To reduce this loss in energy-efficient buildings, a passive antenna system was developed and integrated into sandwich walls. However, the thermal effects of this system, which includes highly thermally conductive metals, require further study. In this research, three-dimensional heat transfer simulations were performed using COMSOL Multiphysics to determine the thermal transmittances (U-values) of 5G antenna walls. The results revealed that, using stainless steel as the connector material (current design), the U-value rose from 0.1496 (for the wall without antenna) to 0.156 W/m2K, leading to an additional heating loss per year of only 0.545 KWh/m2 in Helsinki. In contrast, with the previous design that used copper as the connector material, the U-value increased dramatically to 0.3 W/m2K, exceeding the National Building Code of Finland’s limit of 0.17 W/m2K and causing 12.8 KWh/m2 additional heat loss (23.5 times more than the current design). The current design significantly reduces thermal bridging effects. Additionally, three analytical methods were used to calculate antenna wall U-values: parallel paths, isothermal planes, and ISO 6946 combined. The isothermal planes method was found to be more accurate and reliable. The study also found that a wall unit cell with a single developed 5G antenna and a wall consisting of nine such cells arranged in a 3 × 3 grid pattern had the same U-values. Furthermore, areas affected by thermal bridging were typically smaller than the dimensions of a wall unit cell (150 mm × 150 mm).
Original language | English |
---|---|
Article number | 2657 |
Number of pages | 17 |
Journal | Energies |
Volume | 16 |
Issue number | 6 |
DOIs | |
Publication status | Published - Mar 2023 |
MoE publication type | A1 Journal article-refereed |
Keywords
- 5G antenna walls
- 5G passive antenna system
- ISO 6946 combined method
- isothermal planes method
- numerical modeling
- parallel path method
- sandwich wall
- thermal transmittance
Fingerprint
Dive into the research topics of 'Thermal Impact of 5G Antenna Systems in Sandwich Walls'. Together they form a unique fingerprint.Projects
- 1 Finished
-
STARCLUB: Signal-Transmissive-Walls with Embedded Passive Antennas for Radio-Connected Low- Energy Urban Buildings
Haneda, K. (Principal investigator), Koivumäki, P. (Project Member), Icheln, C. (Project Member), Vähä-Savo, L. (Project Member), Xue, B. (Project Member), Heino, M. (Project Member), Kiviharju, P. (Project Member), Tuomela, J. (Project Member), De Guzman, M. (Project Member) & Kourani, A. (Project Member)
01/09/2019 → 31/08/2023
Project: Academy of Finland: Other research funding