Projects per year
Abstract
Advancing nanocomposites requires a deep understanding and careful design of nanoscale interfaces, as interfacial interactions and adhesion significantly influence the physical and mechanical properties of these materials. This study demonstrates the effectiveness of lignin nanoparticles (LNPs) as interfacial compatibilizer between hydrophilic cellulose nanofibrils (CNF) and a hydrophobic polyester, polycaprolactone (PCL). In this context, we conducted a detailed analysis of surface-to-bulk interactions in both wet and dry conditions using advanced techniques such as quartz crystal microbalance with dissipation (QCM-D), atomic force microscopy (AFM), water contact angle (WCA) measurements, broadband dielectric spectroscopy (BDS), and inverse gas chromatography (IGC). QCM-D was employed to quantify the adsorption behavior of LNPs on CNF and PCL surfaces, demonstrating LNPs’ capability to interact with both hydrophilic and hydrophobic phases, thereby enhancing composite material properties. LNPs showed extensive adsorption on a CNF model film (1186 ± 178 ng.cm−2) and a lower but still significant adsorption on a PCL model film (270 ± 64 ng.cm−2). In contrast, CNF adsorption on a PCL model film was the lowest, with a sensed mass of only 136 ± 35 ng.cm−2. These findings were further supported by comparing the morphology and wettability of the films before and after adsorption, using AFM and WCA analyses. Then, to gain insights into the molecular-level interactions and molecular mobility within the composite in dry state, BDS was employed. The BDS results showed that LNPs improved the dispersion of PCL within the CNF network. To further investigate the impact of LNPs on the composites’ interfacial properties, IGC was employed. This analysis showed that the composite films containing LNPs exhibited lower surface energy compared to those composed of only CNF and PCL. The presence of LNPs likely reduced the availability of surface hydroxyl groups, thus modifying the physicochemical properties of the interface. These changes were particularly evident in the heterogeneity of the surface energy profile, indicating that LNPs significantly altered the interfacial characteristics of the composite materials. Overall, these findings emphasize the necessity to control the interfaces between components for next-generation nanocomposite materials across diverse applications.
Original language | English |
---|---|
Pages (from-to) | 263-275 |
Number of pages | 13 |
Journal | Journal of Colloid and Interface Science |
Volume | 679 |
Early online date | 24 Oct 2024 |
DOIs | |
Publication status | Published - Feb 2025 |
MoE publication type | A1 Journal article-refereed |
Keywords
- Cellulose nanofibrils
- Interfacial compatibilizers
- Lignin nanoparticles
- Polyester
Fingerprint
Dive into the research topics of 'The role of lignin as interfacial compatibilizer in designing lignocellulosic-polyester composite films'. Together they form a unique fingerprint.-
FinnCERES: Competence Center for the Materials Bioeconomy: A Flagship for our Sustainable Future
Naukkarinen, O. (Principal investigator)
01/05/2022 → 30/06/2026
Project: Academy of Finland: Other research funding
-
Aalto University Bioinnovation Center
Hummel, M. (Principal investigator), Dessbesell, L. (Project Member), Ahola, S. (Project Member), Iannacchero, M. (Project Member), Mahler, L. (Project Member), Basnayaka, M. (Project Member), Babaeipour, S. (Project Member), Guridi Sotomayor, S. (Project Member), Westerback, H. (Project Member), Heimala, S. (Project Member), Real de Almeida, M. (Project Member), Qureshi, T. (Project Member), Hardjono, V. (Project Member), Piquemal, E. (Project Member), Mehmood, W. (Project Member) & Moussa, K. (Project Member)
01/01/2021 → 31/12/2030
Project: Domestic funds and foundations
-
Smart assembly of wood polymers for multifunctional advanced materials
Kimiaei, E. (Project Member) & Österberg, M. (Principal investigator)
01/01/2021 → 31/12/2023
Project: Domestic funds and foundations