Simulation and Comparison of Mathematical Models of PV Cells with Growing Levels of Complexity

Research output: Contribution to journalArticleScientificpeer-review

Standard

Simulation and Comparison of Mathematical Models of PV Cells with Growing Levels of Complexity. / Rodrigues, Eduardo Manuel Godinho; Godina, Radu; Marzband, Mousa; Pouresmaeil, Edris.

In: Energies, Vol. 11, No. 11, 2902, 2018.

Research output: Contribution to journalArticleScientificpeer-review

Harvard

APA

Vancouver

Author

Rodrigues, Eduardo Manuel Godinho ; Godina, Radu ; Marzband, Mousa ; Pouresmaeil, Edris. / Simulation and Comparison of Mathematical Models of PV Cells with Growing Levels of Complexity. In: Energies. 2018 ; Vol. 11, No. 11.

Bibtex - Download

@article{cb5b422577b449a4ba03e6b0899721cb,
title = "Simulation and Comparison of Mathematical Models of PV Cells with Growing Levels of Complexity",
abstract = "The amount of energy generated from a photovoltaic installation depends mainly on two factors—the temperature and solar irradiance. Numerous maximum power point tracking (MPPT) techniques have been developed for photovoltaic systems. The challenge is what method to employ in order to obtain optimum operating points (voltage and current) automatically at the maximum photovoltaic output power in most conditions. This paper is focused on the structural analysis of mathematical models of PV cells with growing levels of complexity. The main objective is to simulate and compare the characteristic current-voltage (I-V) and power-voltage (P-V) curves of equivalent circuits of the ideal PV cell model and, with one and with two diodes, that is, equivalent circuits with five and seven parameters. The contribution of each parameter is analyzed in the particular context of a given model and then generalized through comparison to a more complex model. In this study the numerical simulation of the models is used intensively and extensively. The approach utilized to model the equivalent circuits permits an adequate simulation of the photovoltaic array systems by considering the compromise between the complexity and accuracy. By utilizing the Newton–Raphson method the studied models are then employed through the use of Matlab/Simulink. Finally, this study concludes with an analysis and comparison of the evolution of maximum power observed in the models.",
keywords = "photovoltaic cells, maximum power point tracking, sustainable energy, mathematical models, Newton-Raphson",
author = "Rodrigues, {Eduardo Manuel Godinho} and Radu Godina and Mousa Marzband and Edris Pouresmaeil",
year = "2018",
doi = "10.3390/en11112902",
language = "English",
volume = "11",
journal = "Energies",
issn = "1996-1073",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "11",

}

RIS - Download

TY - JOUR

T1 - Simulation and Comparison of Mathematical Models of PV Cells with Growing Levels of Complexity

AU - Rodrigues, Eduardo Manuel Godinho

AU - Godina, Radu

AU - Marzband, Mousa

AU - Pouresmaeil, Edris

PY - 2018

Y1 - 2018

N2 - The amount of energy generated from a photovoltaic installation depends mainly on two factors—the temperature and solar irradiance. Numerous maximum power point tracking (MPPT) techniques have been developed for photovoltaic systems. The challenge is what method to employ in order to obtain optimum operating points (voltage and current) automatically at the maximum photovoltaic output power in most conditions. This paper is focused on the structural analysis of mathematical models of PV cells with growing levels of complexity. The main objective is to simulate and compare the characteristic current-voltage (I-V) and power-voltage (P-V) curves of equivalent circuits of the ideal PV cell model and, with one and with two diodes, that is, equivalent circuits with five and seven parameters. The contribution of each parameter is analyzed in the particular context of a given model and then generalized through comparison to a more complex model. In this study the numerical simulation of the models is used intensively and extensively. The approach utilized to model the equivalent circuits permits an adequate simulation of the photovoltaic array systems by considering the compromise between the complexity and accuracy. By utilizing the Newton–Raphson method the studied models are then employed through the use of Matlab/Simulink. Finally, this study concludes with an analysis and comparison of the evolution of maximum power observed in the models.

AB - The amount of energy generated from a photovoltaic installation depends mainly on two factors—the temperature and solar irradiance. Numerous maximum power point tracking (MPPT) techniques have been developed for photovoltaic systems. The challenge is what method to employ in order to obtain optimum operating points (voltage and current) automatically at the maximum photovoltaic output power in most conditions. This paper is focused on the structural analysis of mathematical models of PV cells with growing levels of complexity. The main objective is to simulate and compare the characteristic current-voltage (I-V) and power-voltage (P-V) curves of equivalent circuits of the ideal PV cell model and, with one and with two diodes, that is, equivalent circuits with five and seven parameters. The contribution of each parameter is analyzed in the particular context of a given model and then generalized through comparison to a more complex model. In this study the numerical simulation of the models is used intensively and extensively. The approach utilized to model the equivalent circuits permits an adequate simulation of the photovoltaic array systems by considering the compromise between the complexity and accuracy. By utilizing the Newton–Raphson method the studied models are then employed through the use of Matlab/Simulink. Finally, this study concludes with an analysis and comparison of the evolution of maximum power observed in the models.

KW - photovoltaic cells

KW - maximum power point tracking

KW - sustainable energy

KW - mathematical models

KW - Newton-Raphson

U2 - 10.3390/en11112902

DO - 10.3390/en11112902

M3 - Article

VL - 11

JO - Energies

JF - Energies

SN - 1996-1073

IS - 11

M1 - 2902

ER -

ID: 28944767