PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation

Homayoun Soltani Gohari; Hadi Tarzamni; Peter Sergeant; Hendrik Vansompel

doi:10.1109/IECON51785.2023.10312286

PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation

Homayoun Soltani Gohari
, Hadi Tarzamni
, Peter Sergeant
, Hendrik Vansompel

Ghent University

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

3 Citations (Scopus)

56 Downloads (Pure)

Abstract

This paper delves into the development of on-board EV chargers with the purpose of using the energy of the vehicle-roof photovoltaic panels and merging charging and driving modes power converters. In pursuit of this objective, a novel high step-up coupled inductor-based DC-DC converter is proposed, which enables the proposed charger to use the PV panel energy in an efficient way. From utility grid point of view, a bridgeless AC-DC converter is considered that is able to operate in continuous and discontinuous conduction modes (CCM and DCM), providing the chance to achieve natural power factor correction in DCM operation in addition to control the power factor in CCM operation. The sources participate in charging process via the proposed dual-input single-output SEPIC based DC-DC converter. In addition to the charging mode, in which the battery is charged using grid and/or PV panel, the proposed charger can deliver energy from the battery and PV panel to the motor drive system during driving mode. It should be noted that the buck-boost structure of the proposed converter enables the control system to manage the power sources and load efficiently according to their characteristics. All stages of the proposed multifunctional multiport on-board charger are analyzed thoroughly and simulation results are given to validate the analysis.

Original language	English
Title of host publication	IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society
Publisher	IEEE
Pages	1-7
Number of pages	7
ISBN (Electronic)	979-8-3503-3182-0
ISBN (Print)	979-8-3503-3183-7
DOIs	https://doi.org/10.1109/IECON51785.2023.10312286
Publication status	Published - 19 Oct 2023
MoE publication type	A4 Conference publication
Event	Annual Conference of the IEEE Industrial Electronics Society - Singapore, Singapore, Singapore, Singapore Duration: 16 Oct 2023 → 19 Oct 2023 Conference number: 49

Publication series

Name	Proceedings of the Annual Conference of the IEEE Industrial Electronics Society
ISSN (Electronic)	2577-1647

Conference

Conference	Annual Conference of the IEEE Industrial Electronics Society
Abbreviated title	IECON
Country/Territory	Singapore
City	Singapore
Period	16/10/2023 → 19/10/2023

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Photovoltaic systems
Motor drives
Reactive power
Simulation
Merging
DC-DC power converters
Power factor correction

Access to Document

10.1109/IECON51785.2023.10312286

Matn25MAccepted author manuscript, 949 KB

Cite this

Gohari, H. S., Tarzamni, H., Sergeant, P., & Vansompel, H. (2023). PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation. In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society (pp. 1-7). Article 10312286 ( Proceedings of the Annual Conference of the IEEE Industrial Electronics Society). IEEE. https://doi.org/10.1109/IECON51785.2023.10312286

@inproceedings{a16e3816c62a4571bcbea99c36452512,

title = "PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation",

abstract = "This paper delves into the development of on-board EV chargers with the purpose of using the energy of the vehicle-roof photovoltaic panels and merging charging and driving modes power converters. In pursuit of this objective, a novel high step-up coupled inductor-based DC-DC converter is proposed, which enables the proposed charger to use the PV panel energy in an efficient way. From utility grid point of view, a bridgeless AC-DC converter is considered that is able to operate in continuous and discontinuous conduction modes (CCM and DCM), providing the chance to achieve natural power factor correction in DCM operation in addition to control the power factor in CCM operation. The sources participate in charging process via the proposed dual-input single-output SEPIC based DC-DC converter. In addition to the charging mode, in which the battery is charged using grid and/or PV panel, the proposed charger can deliver energy from the battery and PV panel to the motor drive system during driving mode. It should be noted that the buck-boost structure of the proposed converter enables the control system to manage the power sources and load efficiently according to their characteristics. All stages of the proposed multifunctional multiport on-board charger are analyzed thoroughly and simulation results are given to validate the analysis.",

keywords = "Photovoltaic systems, Motor drives, Reactive power, Simulation, Merging, DC-DC power converters, Power factor correction",

author = "Gohari, \{Homayoun Soltani\} and Hadi Tarzamni and Peter Sergeant and Hendrik Vansompel",

year = "2023",

month = oct,

day = "19",

doi = "10.1109/IECON51785.2023.10312286",

language = "English",

isbn = "979-8-3503-3183-7",

series = " Proceedings of the Annual Conference of the IEEE Industrial Electronics Society",

publisher = "IEEE",

pages = "1--7",

booktitle = "IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society",

address = "United States",

note = "Annual Conference of the IEEE Industrial Electronics Society, IECON ; Conference date: 16-10-2023 Through 19-10-2023",

}

Gohari, HS, Tarzamni, H, Sergeant, P & Vansompel, H 2023, PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation. in IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society., 10312286, Proceedings of the Annual Conference of the IEEE Industrial Electronics Society, IEEE, pp. 1-7, Annual Conference of the IEEE Industrial Electronics Society, Singapore, Singapore, 16/10/2023. https://doi.org/10.1109/IECON51785.2023.10312286

PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation. / Gohari, Homayoun Soltani; Tarzamni, Hadi; Sergeant, Peter et al.
IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2023. p. 1-7 10312286 ( Proceedings of the Annual Conference of the IEEE Industrial Electronics Society).

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation

AU - Gohari, Homayoun Soltani

AU - Tarzamni, Hadi

AU - Sergeant, Peter

AU - Vansompel, Hendrik

N1 - Conference code: 49

PY - 2023/10/19

Y1 - 2023/10/19

N2 - This paper delves into the development of on-board EV chargers with the purpose of using the energy of the vehicle-roof photovoltaic panels and merging charging and driving modes power converters. In pursuit of this objective, a novel high step-up coupled inductor-based DC-DC converter is proposed, which enables the proposed charger to use the PV panel energy in an efficient way. From utility grid point of view, a bridgeless AC-DC converter is considered that is able to operate in continuous and discontinuous conduction modes (CCM and DCM), providing the chance to achieve natural power factor correction in DCM operation in addition to control the power factor in CCM operation. The sources participate in charging process via the proposed dual-input single-output SEPIC based DC-DC converter. In addition to the charging mode, in which the battery is charged using grid and/or PV panel, the proposed charger can deliver energy from the battery and PV panel to the motor drive system during driving mode. It should be noted that the buck-boost structure of the proposed converter enables the control system to manage the power sources and load efficiently according to their characteristics. All stages of the proposed multifunctional multiport on-board charger are analyzed thoroughly and simulation results are given to validate the analysis.

AB - This paper delves into the development of on-board EV chargers with the purpose of using the energy of the vehicle-roof photovoltaic panels and merging charging and driving modes power converters. In pursuit of this objective, a novel high step-up coupled inductor-based DC-DC converter is proposed, which enables the proposed charger to use the PV panel energy in an efficient way. From utility grid point of view, a bridgeless AC-DC converter is considered that is able to operate in continuous and discontinuous conduction modes (CCM and DCM), providing the chance to achieve natural power factor correction in DCM operation in addition to control the power factor in CCM operation. The sources participate in charging process via the proposed dual-input single-output SEPIC based DC-DC converter. In addition to the charging mode, in which the battery is charged using grid and/or PV panel, the proposed charger can deliver energy from the battery and PV panel to the motor drive system during driving mode. It should be noted that the buck-boost structure of the proposed converter enables the control system to manage the power sources and load efficiently according to their characteristics. All stages of the proposed multifunctional multiport on-board charger are analyzed thoroughly and simulation results are given to validate the analysis.

KW - Photovoltaic systems

KW - Motor drives

KW - Reactive power

KW - Simulation

KW - Merging

KW - DC-DC power converters

KW - Power factor correction

UR - https://ieeexplore.ieee.org/document/10312286/

UR - https://www.scopus.com/pages/publications/85179523447

U2 - 10.1109/IECON51785.2023.10312286

DO - 10.1109/IECON51785.2023.10312286

M3 - Conference article in proceedings

SN - 979-8-3503-3183-7

T3 - Proceedings of the Annual Conference of the IEEE Industrial Electronics Society

SP - 1

EP - 7

BT - IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society

PB - IEEE

T2 - Annual Conference of the IEEE Industrial Electronics Society

Y2 - 16 October 2023 through 19 October 2023

ER -

Gohari HS, Tarzamni H, Sergeant P, Vansompel H. PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation. In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. IEEE. 2023. p. 1-7. 10312286. ( Proceedings of the Annual Conference of the IEEE Industrial Electronics Society). doi: 10.1109/IECON51785.2023.10312286

PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this