Partially premixed combustion in a low load operated power plant engine

Research output: Contribution to journalArticleScientificpeer-review

Researchers

Research units

  • FS Dynamics Finland Oy Ab
  • Wärtsilä Finland Oy
  • Aalto University

Abstract

Diesel engines are used extensively in large-scale power plant generators due to their excellent performance and thermal efficiency. On the other hand, diesel engines are associated with numerous environmental issues such as soot and NOx emissions. In recent years, several strategies have been introduced to eradicate these environmental problems. Among them, Partially Premixed Combustion (PPC) has been one of the most promising and reliable strategies. PPC is a compression-ignited combustion process in which ignition delay is controlled to enhance better homogeneity of the air-fuel mixture. In PPC, ignition delay control is typically achieved with Exhaust Gas Recirculation (EGR), resulting in both low NOx and soot emissions. A single-cylinder research engine was used in the present study. The computational model was validated against experimental data for both normal diesel combustion conditions and PPC conditions. A detailed study was conducted for the effects of injection pressure and nozzle-hole size for PPC combustion at low engine load conditions. In addition, the fuel injection direction in combination with the injection timing was analysed to reveal optimum operation points for PPC combustion. Two piston top shapes were used in order to get better homogeneity of the air-fuel mixture prior to combustion and to reduce the amount of fuel vapour from the periphery of the combustion chamber. The final part of the present study implemented EGR to control the temperature for prolonged ignition delay. The results suggest that PPC combustion significantly aids in reducing emissions. It was found out that NOx was reduced by 60-80% and soot by 70-80% as a result of optimized injection settings. Furthermore, the advantage of a deeper piston bowl was taken into account in order to reduce reactions close to the periphery of the combustion chamber, which subsequently increased combustion efficiency.

Details

Original languageEnglish
Pages (from-to)1-17
Number of pages17
JournalIndustrial Combustion
Volume15
Issue number1
Publication statusPublished - 2015
MoE publication typeA1 Journal article-refereed

    Research areas

  • Exhaust gas recirculation, Ignition delay, Multiple injection, NOx, Partially premixed combustion, Soot

ID: 17201180