Optimal oversizing of utility-owned renewable DG inverter for voltage rise prevention in MV distribution systems

Research output: Contribution to journalArticleScientificpeer-review

Researchers

Research units

  • South Valley University
  • Budapest University of Technology and Economics
  • Aswan University

Abstract

The penetration of renewable distributed generations (DG) is recently being increased in distribution systems. Due to the intermittent nature of these generation units, several technical problems are expected based on the environmental conditions and load profiles, such as voltage rise and increasing losses. A traditional way to alleviate these technical problems is to oversize their interfacing inverters for releasing their capacities to inject/absorb further reactive power. In the literature, the DG inverter is normally oversized by a certain percentage (e.g., 10%) for this purpose. In turn, an optimization-based method is proposed in this paper to calculate the optimal oversize of the interfaced inverter employed in various utility-owned DG types to regulate voltages and to reduce losses with minimum total costs. The proposed method considers the active power curtailment (APC) feature in the DG inverter and the transformer taps. Different control schemes of the interfaced inverter are considered and incorporated in the proposed optimization model. The simulation results demonstrate the effectiveness of the proposed method compared with existing methods.

Details

Original languageEnglish
Pages (from-to)500-513
Number of pages14
JournalInternational Journal of Electrical Power and Energy Systems
Volume105
Publication statusPublished - 1 Feb 2019
MoE publication typeNot Eligible

    Research areas

  • Active power curtailment, Distributed generation, Distribution systems, Optimal inverter size, Reactive power capability, Voltage regulation

ID: 35288852