TY - JOUR
T1 - Non-destructive microstructural analysis by electrical conductivity
T2 - Comparison with hardness measurements in different materials
AU - Sorger, Gonçalo L.
AU - Oliveira, J. P.
AU - Inácio, Patrick L.
AU - Enzinger, Norbert
AU - Vilaça, Pedro
AU - Miranda, R. M.
AU - Santos, Telmo G.
PY - 2019/3/1
Y1 - 2019/3/1
N2 - The use of non-destructive evaluation (NDE) techniques for assessing microstructural changes in processed materials is of particular importance as it can be used to assess, qualitatively, the integrity of any material/structure. Among the several NDE techniques available, electrical conductivity measurements using eddy currents attract great attention owing to its simplicity and reliability. In this work, the electrical conductivity profiles of friction stir processed Ti6Al4V, Cu, Pb, S355 steel and gas tungsten arc welded AISI 304 stainless steel were determined through eddy currents and four-point probe. In parallel, hardness measurements were also performed. The profiles matched well with the optical macrographs of the materials: while entering in the processed region a variation in both profiles was always observed. One particular advantage of electrical conductivity profiles over hardness was evident: it provides a better resolution of the microstructural alterations in the processed materials. Moreover, when thermomechanical processing induces microstructural changes that modify the magnetic properties of a material, eddy currents testing can be used to qualitatively determine the phase fraction in a given region of the material. A qualitative relation between electrical conductivity measurements and hardness is observed. (C) 2018 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
AB - The use of non-destructive evaluation (NDE) techniques for assessing microstructural changes in processed materials is of particular importance as it can be used to assess, qualitatively, the integrity of any material/structure. Among the several NDE techniques available, electrical conductivity measurements using eddy currents attract great attention owing to its simplicity and reliability. In this work, the electrical conductivity profiles of friction stir processed Ti6Al4V, Cu, Pb, S355 steel and gas tungsten arc welded AISI 304 stainless steel were determined through eddy currents and four-point probe. In parallel, hardness measurements were also performed. The profiles matched well with the optical macrographs of the materials: while entering in the processed region a variation in both profiles was always observed. One particular advantage of electrical conductivity profiles over hardness was evident: it provides a better resolution of the microstructural alterations in the processed materials. Moreover, when thermomechanical processing induces microstructural changes that modify the magnetic properties of a material, eddy currents testing can be used to qualitatively determine the phase fraction in a given region of the material. A qualitative relation between electrical conductivity measurements and hardness is observed. (C) 2018 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
KW - Electrical conductivity
KW - Friction stir processing
KW - Gas tungsten arc welding
KW - Hardness
KW - Non-destructive evaluation techniques
UR - http://www.scopus.com/inward/record.url?scp=85057807677&partnerID=8YFLogxK
U2 - 10.1016/j.jmst.2018.09.047
DO - 10.1016/j.jmst.2018.09.047
M3 - Article
AN - SCOPUS:85057807677
SN - 1005-0302
VL - 35
SP - 360
EP - 368
JO - Journal of Materials Science and Technology
JF - Journal of Materials Science and Technology
IS - 3
ER -