New business from digital spare parts

Sini Metsä-Kortelainen; Joni Reijonen; Tuomas Riipinen; Antti Vaajoki; Pasi Puukko; Mika Salmi; Sergei Chekurov; Roy Björkstrand; Niklas Kretzschmar; Jan Sher Akmal; Tuomas Puttonen; Jouni Partanen

doi:10.32040/2020.978-951-38-8827-5

New business from digital spare parts

Sini Metsä-Kortelainen, Joni Reijonen, Tuomas Riipinen, Antti Vaajoki, Pasi Puukko, Mika Salmi, Sergei Chekurov, Roy Björkstrand, Niklas Kretzschmar, Jan Sher Akmal, Tuomas Puttonen, Jouni Partanen

Department of Energy and Mechanical Engineering

VTT Technical Research Centre of Finland

Research output: Book/Report › Commissioned report

141 Downloads (Pure)

Abstract

The report summarises the results of the New Business From Digital Spare Parts project (DIVALIITO), managed and implemented by VTT and Aalto University during the years 2018-2020. In the project, methods for identification of 3D printable parts from the spare parts libraries were developed, and information available on materials for additive manufacturing were compiled, produced and compared with the conventional manufacturing materials and methods. New spare part concepts such as smart spare parts with embedded intelligence were investigated, and the connections of the process steps of the whole manufacturing chain of the digital spare part were clarified, especially from the workflow, quality control and automation perspectives. The report is a compilation of results and it contains links to original documents where the results are presented more widely.

Original language	English
Publisher	VTT Technical Research Centre of Finland
Number of pages	28
ISBN (Electronic)	978-951-38-8827-5
DOIs	https://doi.org/10.32040/2020.978-951-38-8827-5
Publication status	Published - 2020
MoE publication type	D4 Published development or research report or study

Access to Document

10.32040/2020.978-951-38-8827-5

DIVALIITO final report_finalFinal published version, 1.03 MBLicence: Unspecified

DIVALIITO: New business from digital spare parts
Partanen, J. (Principal investigator)
01/05/2018 → 30/09/2020
Project: Business Finland: Other research funding

Cite this

@book{473c1034b3c64919ae31b57baf5022cc,

title = "New business from digital spare parts",

abstract = "The report summarises the results of the New Business From Digital Spare Parts project (DIVALIITO), managed and implemented by VTT and Aalto University during the years 2018-2020. In the project, methods for identification of 3D printable parts from the spare parts libraries were developed, and information available on materials for additive manufacturing were compiled, produced and compared with the conventional manufacturing materials and methods. New spare part concepts such as smart spare parts with embedded intelligence were investigated, and the connections of the process steps of the whole manufacturing chain of the digital spare part were clarified, especially from the workflow, quality control and automation perspectives. The report is a compilation of results and it contains links to original documents where the results are presented more widely.",

author = "Sini Mets{\"a}-Kortelainen and Joni Reijonen and Tuomas Riipinen and Antti Vaajoki and Pasi Puukko and Mika Salmi and Sergei Chekurov and Roy Bj{\"o}rkstrand and Niklas Kretzschmar and Akmal, {Jan Sher} and Tuomas Puttonen and Jouni Partanen",

year = "2020",

doi = "10.32040/2020.978-951-38-8827-5",

language = "English",

publisher = "VTT Technical Research Centre of Finland",

address = "Finland",

}

TY - BOOK

T1 - New business from digital spare parts

AU - Metsä-Kortelainen, Sini

AU - Reijonen, Joni

AU - Riipinen, Tuomas

AU - Vaajoki, Antti

AU - Puukko, Pasi

AU - Salmi, Mika

AU - Chekurov, Sergei

AU - Björkstrand, Roy

AU - Kretzschmar, Niklas

AU - Akmal, Jan Sher

AU - Puttonen, Tuomas

AU - Partanen, Jouni

PY - 2020

Y1 - 2020

N2 - The report summarises the results of the New Business From Digital Spare Parts project (DIVALIITO), managed and implemented by VTT and Aalto University during the years 2018-2020. In the project, methods for identification of 3D printable parts from the spare parts libraries were developed, and information available on materials for additive manufacturing were compiled, produced and compared with the conventional manufacturing materials and methods. New spare part concepts such as smart spare parts with embedded intelligence were investigated, and the connections of the process steps of the whole manufacturing chain of the digital spare part were clarified, especially from the workflow, quality control and automation perspectives. The report is a compilation of results and it contains links to original documents where the results are presented more widely.

AB - The report summarises the results of the New Business From Digital Spare Parts project (DIVALIITO), managed and implemented by VTT and Aalto University during the years 2018-2020. In the project, methods for identification of 3D printable parts from the spare parts libraries were developed, and information available on materials for additive manufacturing were compiled, produced and compared with the conventional manufacturing materials and methods. New spare part concepts such as smart spare parts with embedded intelligence were investigated, and the connections of the process steps of the whole manufacturing chain of the digital spare part were clarified, especially from the workflow, quality control and automation perspectives. The report is a compilation of results and it contains links to original documents where the results are presented more widely.

U2 - 10.32040/2020.978-951-38-8827-5

DO - 10.32040/2020.978-951-38-8827-5

M3 - Commissioned report

BT - New business from digital spare parts

PB - VTT Technical Research Centre of Finland

ER -

New business from digital spare parts

Abstract

Access to Document

Fingerprint

Projects

DIVALIITO: New business from digital spare parts

Cite this