Multi-objective testing of different brass alloy components for DFM

Sampsa V.A. Laakso; Jakob Johansson; Daniel Johansson; Fredrik Schultheiss; Jan Eric Ståhl

doi:10.1016/j.procir.2019.03.023

Multi-objective testing of different brass alloy components for DFM

Sampsa V.A. Laakso^*, Jakob Johansson, Daniel Johansson, Fredrik Schultheiss, Jan Eric Ståhl

^*Corresponding author for this work

Department of Energy and Mechanical Engineering

Lund University

Research output: Contribution to journal › Conference article › Scientific › peer-review

1 Citation (Scopus)

113 Downloads (Pure)

Abstract

This paper investigates the differences of leaded and low-lead brasses in terms of mechanical and thermal properties, machinability and product strength using physical testing and simulations. The information can be used in companies for Design for Manufacturability (DFM) while designing processes for lead free brass. The novelty of this research is to combine data from different testing methods to a unified model that can be used in both cutting simulations and product simulations.

Original language	English
Pages (from-to)	127-132
Number of pages	6
Journal	Procedia CIRP
Volume	81
DOIs	https://doi.org/10.1016/j.procir.2019.03.023
Publication status	Published - 1 Jan 2019
MoE publication type	A4 Conference publication
Event	CIRP Conference on Manufacturing Systems - Ljubljana, Slovenia Duration: 12 Jun 2019 → 14 Jun 2019 Conference number: 52

Keywords

FEM
Metal cutting
Multi-objective testing

Access to Document

10.1016/j.procir.2019.03.023

ENG_Laakso_et_al_Multi-objective _testing_Procedia_CIRPFinal published version, 0.99 MBLicence: CC BY-NC-ND

Cite this

@article{577a989ef1bd4912a0c67ea149eedea6,

title = "Multi-objective testing of different brass alloy components for DFM",

abstract = "This paper investigates the differences of leaded and low-lead brasses in terms of mechanical and thermal properties, machinability and product strength using physical testing and simulations. The information can be used in companies for Design for Manufacturability (DFM) while designing processes for lead free brass. The novelty of this research is to combine data from different testing methods to a unified model that can be used in both cutting simulations and product simulations.",

keywords = "FEM, Metal cutting, Multi-objective testing",

author = "Laakso, {Sampsa V.A.} and Jakob Johansson and Daniel Johansson and Fredrik Schultheiss and St{\aa}hl, {Jan Eric}",

year = "2019",

month = jan,

day = "1",

doi = "10.1016/j.procir.2019.03.023",

language = "English",

volume = "81",

pages = "127--132",

journal = "Procedia CIRP",

issn = "2212-8271",

publisher = "Elsevier",

note = "CIRP Conference on Manufacturing Systems, CIRP CMS ; Conference date: 12-06-2019 Through 14-06-2019",

}

TY - JOUR

T1 - Multi-objective testing of different brass alloy components for DFM

AU - Laakso, Sampsa V.A.

AU - Johansson, Jakob

AU - Johansson, Daniel

AU - Schultheiss, Fredrik

AU - Ståhl, Jan Eric

N1 - Conference code: 52

PY - 2019/1/1

Y1 - 2019/1/1

N2 - This paper investigates the differences of leaded and low-lead brasses in terms of mechanical and thermal properties, machinability and product strength using physical testing and simulations. The information can be used in companies for Design for Manufacturability (DFM) while designing processes for lead free brass. The novelty of this research is to combine data from different testing methods to a unified model that can be used in both cutting simulations and product simulations.

AB - This paper investigates the differences of leaded and low-lead brasses in terms of mechanical and thermal properties, machinability and product strength using physical testing and simulations. The information can be used in companies for Design for Manufacturability (DFM) while designing processes for lead free brass. The novelty of this research is to combine data from different testing methods to a unified model that can be used in both cutting simulations and product simulations.

KW - FEM

KW - Metal cutting

KW - Multi-objective testing

UR - http://www.scopus.com/inward/record.url?scp=85068456505&partnerID=8YFLogxK

U2 - 10.1016/j.procir.2019.03.023

DO - 10.1016/j.procir.2019.03.023

M3 - Conference article

AN - SCOPUS:85068456505

SN - 2212-8271

VL - 81

SP - 127

EP - 132

JO - Procedia CIRP

JF - Procedia CIRP

T2 - CIRP Conference on Manufacturing Systems

Y2 - 12 June 2019 through 14 June 2019

ER -

Multi-objective testing of different brass alloy components for DFM

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this