Infrastructure for Digital Calibration Certificates

Clifford Brown; Tommi Elo; Kristine Hovhannisyan; Daniel Hutzschenreuter; Petri Kuosmanen; Olaf Maennel; Tuukka Mustapää; Pekka Nikander; Thomas Wiedenhoefer

doi:10.1109/MetroInd4.0IoT48571.2020.9138220

Infrastructure for Digital Calibration Certificates

Clifford Brown, Tommi Elo, Kristine Hovhannisyan, Daniel Hutzschenreuter, Petri Kuosmanen, Olaf Maennel, Tuukka Mustapää, Pekka Nikander, Thomas Wiedenhoefer

Department of Energy and Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

21 Citations (Scopus)

Abstract

Digital Calibration Certificates (DCCs) will soon replace Paper Calibration Certificates (PCCs). As electronic files they can be communicated instantly and securely to the customer and are machine readable. However, DCCs require a digital security and software infrastructure to fulfil the current 'analogue' processes of authentication and validation that deliver a fully traceable calibration chain to primary standards. Additionally, software and knowledge representation systems will need to be put in place to support the use of DCCs both for the metrology community and for industry. We present in this work an initial analysis of the requirements of this infrastructure for DCCs in order to support Industry 4.0, the Internet of Things (IoT) and future digital metrology.

Original language	English
Title of host publication	2020 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2020 - Proceedings
Publisher	IEEE
Pages	485-489
Number of pages	5
ISBN (Electronic)	9781728148922
DOIs	https://doi.org/10.1109/MetroInd4.0IoT48571.2020.9138220
Publication status	Published - Jun 2020
MoE publication type	A4 Conference publication
Event	IEEE International Workshop on Metrology for Industry 4.0 and IoT - Roma, Italy Duration: 3 Jun 2020 → 5 Jun 2020

Workshop

Workshop	IEEE International Workshop on Metrology for Industry 4.0 and IoT
Abbreviated title	MetroInd 4.0 and IoT
Country/Territory	Italy
City	Roma
Period	03/06/2020 → 05/06/2020

Keywords

Digital Calibration Certificates
Digital metrology
Infrastructure
IoT
Security

Access to Document

10.1109/MetroInd4.0IoT48571.2020.9138220

Cite this

Brown, C., Elo, T., Hovhannisyan, K., Hutzschenreuter, D., Kuosmanen, P., Maennel, O., Mustapää, T., Nikander, P., & Wiedenhoefer, T. (2020). Infrastructure for Digital Calibration Certificates. In 2020 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2020 - Proceedings (pp. 485-489). Article 9138220 IEEE. https://doi.org/10.1109/MetroInd4.0IoT48571.2020.9138220

@inproceedings{8cdc1999809748779b7028db5975a252,

title = "Infrastructure for Digital Calibration Certificates",

abstract = "Digital Calibration Certificates (DCCs) will soon replace Paper Calibration Certificates (PCCs). As electronic files they can be communicated instantly and securely to the customer and are machine readable. However, DCCs require a digital security and software infrastructure to fulfil the current 'analogue' processes of authentication and validation that deliver a fully traceable calibration chain to primary standards. Additionally, software and knowledge representation systems will need to be put in place to support the use of DCCs both for the metrology community and for industry. We present in this work an initial analysis of the requirements of this infrastructure for DCCs in order to support Industry 4.0, the Internet of Things (IoT) and future digital metrology.",

keywords = "Digital Calibration Certificates, Digital metrology, Infrastructure, IoT, Security",

author = "Clifford Brown and Tommi Elo and Kristine Hovhannisyan and Daniel Hutzschenreuter and Petri Kuosmanen and Olaf Maennel and Tuukka Mustap{\"a}{\"a} and Pekka Nikander and Thomas Wiedenhoefer",

year = "2020",

month = jun,

doi = "10.1109/MetroInd4.0IoT48571.2020.9138220",

language = "English",

pages = "485--489",

booktitle = "2020 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2020 - Proceedings",

publisher = "IEEE",

address = "United States",

note = "IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT ; Conference date: 03-06-2020 Through 05-06-2020",

}

Brown, C, Elo, T, Hovhannisyan, K, Hutzschenreuter, D, Kuosmanen, P, Maennel, O, Mustapää, T, Nikander, P & Wiedenhoefer, T 2020, Infrastructure for Digital Calibration Certificates. in 2020 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2020 - Proceedings., 9138220, IEEE, pp. 485-489, IEEE International Workshop on Metrology for Industry 4.0 and IoT, Roma, Italy, 03/06/2020. https://doi.org/10.1109/MetroInd4.0IoT48571.2020.9138220

Infrastructure for Digital Calibration Certificates. / Brown, Clifford; Elo, Tommi; Hovhannisyan, Kristine et al.
2020 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2020 - Proceedings. IEEE, 2020. p. 485-489 9138220.

Research output: Chapter in Book/Report/Conference proceeding › Conference article in proceedings › Scientific › peer-review

TY - GEN

T1 - Infrastructure for Digital Calibration Certificates

AU - Brown, Clifford

AU - Elo, Tommi

AU - Hovhannisyan, Kristine

AU - Hutzschenreuter, Daniel

AU - Kuosmanen, Petri

AU - Maennel, Olaf

AU - Mustapää, Tuukka

AU - Nikander, Pekka

AU - Wiedenhoefer, Thomas

PY - 2020/6

Y1 - 2020/6

N2 - Digital Calibration Certificates (DCCs) will soon replace Paper Calibration Certificates (PCCs). As electronic files they can be communicated instantly and securely to the customer and are machine readable. However, DCCs require a digital security and software infrastructure to fulfil the current 'analogue' processes of authentication and validation that deliver a fully traceable calibration chain to primary standards. Additionally, software and knowledge representation systems will need to be put in place to support the use of DCCs both for the metrology community and for industry. We present in this work an initial analysis of the requirements of this infrastructure for DCCs in order to support Industry 4.0, the Internet of Things (IoT) and future digital metrology.

AB - Digital Calibration Certificates (DCCs) will soon replace Paper Calibration Certificates (PCCs). As electronic files they can be communicated instantly and securely to the customer and are machine readable. However, DCCs require a digital security and software infrastructure to fulfil the current 'analogue' processes of authentication and validation that deliver a fully traceable calibration chain to primary standards. Additionally, software and knowledge representation systems will need to be put in place to support the use of DCCs both for the metrology community and for industry. We present in this work an initial analysis of the requirements of this infrastructure for DCCs in order to support Industry 4.0, the Internet of Things (IoT) and future digital metrology.

KW - Digital Calibration Certificates

KW - Digital metrology

KW - Infrastructure

KW - IoT

KW - Security

UR - http://www.scopus.com/inward/record.url?scp=85088860620&partnerID=8YFLogxK

U2 - 10.1109/MetroInd4.0IoT48571.2020.9138220

DO - 10.1109/MetroInd4.0IoT48571.2020.9138220

M3 - Conference article in proceedings

AN - SCOPUS:85088860620

SP - 485

EP - 489

BT - 2020 IEEE International Workshop on Metrology for Industry 4.0 and IoT, MetroInd 4.0 and IoT 2020 - Proceedings

PB - IEEE

T2 - IEEE International Workshop on Metrology for Industry 4.0 and IoT

Y2 - 3 June 2020 through 5 June 2020

ER -

Infrastructure for Digital Calibration Certificates

Abstract

Workshop

Keywords

Access to Document

Other files and links

Fingerprint

SmartCom: Communication and validation of smart data in oT-networks

Cite this

Infrastructure for Digital Calibration Certificates

Abstract

Workshop

Keywords

Access to Document

Other files and links

Fingerprint

Projects

SmartCom: Communication and validation of smart data in oT-networks

Cite this