Finite element level validation of an anisotropic hysteresis model for non-oriented electrical steel sheets

Brijesh Upadhaya; Paavo Rasilo; Paul Handgruber; Anouar Belahcen; Antero Arkkio

doi:10.1016/j.jmmm.2022.169978

Finite element level validation of an anisotropic hysteresis model for non-oriented electrical steel sheets

Brijesh Upadhaya^*, Paavo Rasilo, Paul Handgruber, Anouar Belahcen, Antero Arkkio

^*Corresponding author for this work

Research output: Contribution to journal › Article › Scientific › peer-review

3 Citations (Scopus)

93 Downloads (Pure)

Abstract

This paper presents the finite element level validation of the anisotropic Jiles–Atherton hysteresis model. Numerical analysis of a round rotational single sheet tester is performed using the 2D finite element method. Anisotropic extension of the Jiles–Atherton hysteresis model is coupled with the 2D finite element method. The finite element simulations are performed for the cases when the magnetic field alternates and rotates in the lamination plane. The simulated results for alternating and rotational flux density excitations agree with the measured data. The measured data used in this paper corresponds to the M400-50A nonoriented silicon steel.

Original language	English
Article number	169978
Number of pages	11
Journal	Journal of Magnetism and Magnetic Materials
Volume	564
Early online date	14 Oct 2022
DOIs	https://doi.org/10.1016/j.jmmm.2022.169978
Publication status	Published - 15 Dec 2022
MoE publication type	A1 Journal article-refereed

Keywords

Finite element analysis
Jiles–Atherton
Magnetic anisotropy
Magnetic hysteresis
Non-oriented silicon steel

Access to Document

10.1016/j.jmmm.2022.169978Licence: CC BY

1-s2.0-S0304885322008630-mainFinal published version, 2.96 MBLicence: CC BY

Cite this

@article{e3e0a9667f25431b8ba6bbf2933365d5,

title = "Finite element level validation of an anisotropic hysteresis model for non-oriented electrical steel sheets",

abstract = "This paper presents the finite element level validation of the anisotropic Jiles–Atherton hysteresis model. Numerical analysis of a round rotational single sheet tester is performed using the 2D finite element method. Anisotropic extension of the Jiles–Atherton hysteresis model is coupled with the 2D finite element method. The finite element simulations are performed for the cases when the magnetic field alternates and rotates in the lamination plane. The simulated results for alternating and rotational flux density excitations agree with the measured data. The measured data used in this paper corresponds to the M400-50A nonoriented silicon steel.",

keywords = "Finite element analysis, Jiles–Atherton, Magnetic anisotropy, Magnetic hysteresis, Non-oriented silicon steel",

author = "Brijesh Upadhaya and Paavo Rasilo and Paul Handgruber and Anouar Belahcen and Antero Arkkio",

note = "Publisher Copyright: {\textcopyright} 2022 The Author(s)",

year = "2022",

month = dec,

day = "15",

doi = "10.1016/j.jmmm.2022.169978",

language = "English",

volume = "564",

journal = "Journal of Magnetism and Magnetic Materials",

issn = "0304-8853",

publisher = "Elsevier Science B.V.",

}

TY - JOUR

T1 - Finite element level validation of an anisotropic hysteresis model for non-oriented electrical steel sheets

AU - Upadhaya, Brijesh

AU - Rasilo, Paavo

AU - Handgruber, Paul

AU - Belahcen, Anouar

AU - Arkkio, Antero

PY - 2022/12/15

Y1 - 2022/12/15

N2 - This paper presents the finite element level validation of the anisotropic Jiles–Atherton hysteresis model. Numerical analysis of a round rotational single sheet tester is performed using the 2D finite element method. Anisotropic extension of the Jiles–Atherton hysteresis model is coupled with the 2D finite element method. The finite element simulations are performed for the cases when the magnetic field alternates and rotates in the lamination plane. The simulated results for alternating and rotational flux density excitations agree with the measured data. The measured data used in this paper corresponds to the M400-50A nonoriented silicon steel.

AB - This paper presents the finite element level validation of the anisotropic Jiles–Atherton hysteresis model. Numerical analysis of a round rotational single sheet tester is performed using the 2D finite element method. Anisotropic extension of the Jiles–Atherton hysteresis model is coupled with the 2D finite element method. The finite element simulations are performed for the cases when the magnetic field alternates and rotates in the lamination plane. The simulated results for alternating and rotational flux density excitations agree with the measured data. The measured data used in this paper corresponds to the M400-50A nonoriented silicon steel.

KW - Finite element analysis

KW - Jiles–Atherton

KW - Magnetic anisotropy

KW - Magnetic hysteresis

KW - Non-oriented silicon steel

UR - http://www.scopus.com/inward/record.url?scp=85141434200&partnerID=8YFLogxK

U2 - 10.1016/j.jmmm.2022.169978

DO - 10.1016/j.jmmm.2022.169978

M3 - Article

AN - SCOPUS:85141434200

SN - 0304-8853

VL - 564

JO - Journal of Magnetism and Magnetic Materials

JF - Journal of Magnetism and Magnetic Materials

M1 - 169978

ER -

Finite element level validation of an anisotropic hysteresis model for non-oriented electrical steel sheets

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this