Fatigue strength assessment of HFMI-treated butt welds by the effective notch stress method

Halid Can Yildirim*

*Corresponding author for this work

    Research output: Contribution to journalArticleScientificpeer-review

    7 Citations (Scopus)

    Abstract

    Experimental fatigue data for high-frequency mechanical impact (HFMI)-treated butt welds with low stress concentrations have been collected and analysed using the effective notch stress (ENS) method given by the International Institute of Welding (IIW). The aim of this study is to suggest a more reliable fatigue assessment procedure for HFMI-improved butt welds with low stress concentration factors. In total, 165 published test results for butt welds subject to R = 0.1 and R = 0.5 axial loading are presented. K n, min values for the ENS approach are suggested in order to avoid computational problems due to low stress concentrations at the weld toe. Minimum notch stress concentration values are suggested based on the material yield strength (f y ). All the data is presented with respect to previously proposed and verified material f y correction method. For HFMI-treated butt welds in the ENS system, the use of the K n, min values with the f y correction representing one fatigue class (approximately 12.5 %) increase in strength for every 200-MPa increase in f y has been proposed and verified.

    Original languageEnglish
    Pages (from-to)279-288
    Number of pages10
    JournalWelding in the World
    Volume58
    Issue number3
    DOIs
    Publication statusPublished - 2014
    MoE publication typeA1 Journal article-refereed

    Keywords

    • Fatigue improvement
    • Fatigue strength
    • High-strength steels
    • Notch effect
    • Weld toes

    Fingerprint Dive into the research topics of 'Fatigue strength assessment of HFMI-treated butt welds by the effective notch stress method'. Together they form a unique fingerprint.

  • Cite this