Experimental study on the role of the target electron temperature as a key parameter linking recycling to plasma performance in JET-ILW

B. Lomanowski*, M. Dunne, N. Vianello, S. Aleiferis, M. Brix, J. Canik, I. S. Carvalho, L. Frassinetti, D. Frigione, L. Garzotti, M. Groth, A. Meigs, S. Menmuir, M. Maslov, T. Pereira, C. Perez Von Thun, M. Reinke, D. Refy, F. Rimini, G. RubinoP. A. Schneider, G. Sergienko, A. Uccello, D. Van Eester, JET Contributors

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)

Abstract

Changes in global and edge plasma parameters (H98(y,2), dimensionless collisionality ν*, core density peaking, separatrix density ne,sep) with variations in the D2 fueling rate and divertor configuration are unified into a single trend when mapped to ⟨Te,ot⟩, the spatially averaged spectroscopically derived outer target electron temperature. Dedicated JET with the ITER-like wall (JET-ILW) experiments in combination with an extended JET-ILW database of unseeded low-triangularity H-mode plasmas spanning a wide range of D2 fueling rates, Ip, Bt and heating power have demonstrated the importance of ⟨Te,ot⟩ as a key physics parameter linking the recycling particle source and detachment with plasma performance. The remarkably robust H98(y,2) trend with ⟨Te,ot⟩ is connected to a strong inverse correlation between ⟨Te,ot⟩, ne,sep and ν*, thus directly linking changes in the divertor recycling moderated by ⟨Te,ot⟩ with the previously established relationship between ν*, core density peaking and core pressure resulting in a degradation in core plasma performance with decreasing ⟨Te,ot⟩ (increasing ν*). A strong inverse correlation between the separatrix to pedestal density ratio, ne,sep/ne,ped, and ⟨Te,ot⟩ is also established, with the rise in ne,sep/ne,ped saturating at ⟨Te,ot⟩ > 10 eV. A strong reduction in H98(y,2) is observed as ⟨Te,ot⟩ is driven from 30 to 10 eV via additional D2 gas fueling, while the divertor remains attached. Consequently, the pronounced performance degradation in attached divertor conditions has implications for impurity seeding radiative divertor scenarios, in which H98(y,2) is already low (∼0.7) before impurities are injected into the plasma since moderate gas fueling rates are required to promote high divertor neutral pressure. A favorable pedestal pressure, pe,ped, dependence on Ip has also been observed, with an overall increase in pe,ped at Ip = 3.4 MA as ⟨Te,ot⟩ is driven down from attached to high-recycling divertor conditions. In contrast, pe,ped is reduced with decreasing ⟨Te,ot⟩ in the lower Ip branches. Further work is needed to (i) clarify the potential role of edge opacity on the observed favorable pedestal pressure Ip scaling; as well as to (ii) project the global and edge plasma performance trends with ⟨Te,ot⟩ to reactor-scale devices to improve predictive capability of the coupling between recycling and confined plasma fueling in what are foreseen to be more opaque edge plasma conditions.

Original languageEnglish
Article number066030
Pages (from-to)1-13
Number of pages13
JournalNuclear Fusion
Volume62
Issue number6
DOIs
Publication statusPublished - Jun 2022
MoE publication typeA1 Journal article-refereed

Keywords

  • experimental plasma boundary physics
  • integration of tokamak exhaust and performance
  • plasma divertor spectroscopy
  • recycling impact on plasma performance

Fingerprint

Dive into the research topics of 'Experimental study on the role of the target electron temperature as a key parameter linking recycling to plasma performance in JET-ILW'. Together they form a unique fingerprint.

Cite this