Experimental study of heat generation rate during discharge of lifePO4 pouch cells of different nominal capacities and thickness

Research output: Contribution to journalArticle

Researchers

Research units

  • Swinburne University of Technology

Abstract

High manufacturing cost and thermal stability of Li-ion battery cells are currently the two main deterrents to prolific demand for electric vehicles. A plausible solution to this issue is a modular/scalable battery thermal management system (TMS). A modular TMS can ensure thermal reliability for battery cells of different capacities and size without needing major structural revision besides facilitating mass-production. However, understanding the relationship of heat generation rates with cell capacity and thickness is essential for developing a scalable TMS. The present paper discusses results derived from an experimental investigation undertaken with this purpose. Heat generation rates for LiFePO4 pouch cells of different nominal capacities are measured at discharge rates of 0.33C, 1C and 3C in ambient temperatures ranging between −10 and 50C using a custom-designed calorimeter. It is observed that heat generation rates of the LiFePO4 pouch cells become independent of their nominal capacity and thickness if the ambient temperature is regulated at 35C. In ambient temperatures lower than 35C though, the thin battery cells are found to be generating heat at rates greater than those of thick battery cells and vice-versa at temperatures over 35C for all discharge rates.

Details

Original languageEnglish
Article number70
JournalBatteries
Volume5
Issue number4
Publication statusPublished - 1 Dec 2019
MoE publication typeA1 Journal article-refereed

    Research areas

  • Adiabatic calorimeter, Battery electrodes, Electric vehicles, Heat generation, Inverse heat conduction problems, Li-ion battery packs, Modular battery thermal management systems

ID: 40550045