Projects per year
Colloidal lignin particles (CLPs) are potentially one of the sustainable alternatives for petroleum-based feedstock. CLPs address the heterogeneity of lignin by enhancing its homogeneous dispersion in aqueous phases. The main production steps are dissolving lignin in tetrahydrofuran, diluting the solution with ethanol, forming CLPs through self-assembly after encountering water, recovering solvents, and finally drying CLPs. In this process, solvent recovery plays an important role in mitigating environmental problems. However, the formation of azeotropes makes the separation process energy-intensive and costly. In this work, two separation methods, evaporation and distillation, are modelled in Aspen Plus® and compared based on their total annual costs (TACs). Sizing and cost estimations are conducted based on vendor quotations and using design and economic analyzer tools. Results show that distillation reduces costs by up to 37% compared to evaporation. Accordingly, as the main separation unit, distillation parameters are optimized based on the minimum TAC. For further assessment of the increase in the rate of costs by reaching nearly pure products, extractive distillation is simulated and examined. Results show that using an entrainer to enhance the tetrahydrofuran concentration from 88 to 99.5 wt.% substantially increases the TAC by over 50%. Finally, based on the results, the desired solvent recovery model is finalized by employing the rate-based approach. Currently, studies with a focus on the techno-economic assessment of pilot-scale separation units are limited, and the developed model offers a good basis for designing optimal solvent recovery units, related to processes where lignin is dissolved, prior to commercialization.
- Azeotropic ternary mixture
- Colloidal lignin particles
- rate-based model
FingerprintDive into the research topics of 'Energy-efficient and cost-effective separation model for solvent recovery from colloidal lignin particles dispersion'. Together they form a unique fingerprint.
- 1 Finished
01/06/2019 → 30/04/2022
Project: Business Finland: New business from research ideas (TUTLI)