Effect of rotor geometry on bending stiffness variation

Risto Viitala*, Tuomas Tiainen, Raine Viitala

*Corresponding author for this work

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)
10 Downloads (Pure)

Abstract

Bending stiffness variation (BSV) is a common problem causing vibration in large rotating machinery. BSV describes lateral bending stiffness and its variation as a function of the rotational angle. It has been observed that BSV causes excitation exactly twice per revolution, which leads to vibration problems, especially at half critical speed. BSV is caused by rotor geometry errors if the material is assumed to be homogeneous and linearly elastic. Therefore, the study investigated BSV with harmonic roundness components, which are commonly used in industry to describe the geometry of a rotor. Hence, the results are easily applicable in the industry. The research was conducted primarily by analytical means, but also static simulations and numeric calculations were used. The results clearly showed that when the effect of single harmonic roundness components in rotor cross-sections were observed, only the second component could produce BSV. However, when component pairs were studied, they produced BSV also without the second component. If the second component was included, the profile produced BSV the most aggressively. A generated arbitrary roundness profile, including components 3-50 with random phases and amplitudes, indicated that BSV occurs always twice per revolution despite different components in the profile. The results improve the possibilities of eliminating excessive BSV in the industry, when certain components and component pairs can be avoided.

Original languageEnglish
Article number23
Pages (from-to)1-19
Number of pages19
JournalMachines
Volume9
Issue number2
DOIs
Publication statusPublished - 26 Jan 2021
MoE publication typeA1 Journal article-refereed

Keywords

  • Asymmetry
  • Bending stiffness variation
  • Half critical vibration
  • Rotor geometry
  • Roundness component

Fingerprint

Dive into the research topics of 'Effect of rotor geometry on bending stiffness variation'. Together they form a unique fingerprint.

Cite this