All-nanotube stretchable supercapacitor with low equivalent series resistance
Research output: Contribution to journal › Article
- Skolkovo Institute of Science and Technology
- Canatu Ltd.
We report high-performance, stable, low equivalent series resistance all-nanotube stretchable supercapacitor based on single-walled carbon nanotube film electrodes and a boron nitride nanotube separator. A layer of boron nitride nanotubes, fabricated by airbrushing from isopropanol dispersion, allows avoiding problem of high internal resistance and short-circuiting of supercapacitors. The device, fabricated in a two-electrode test cell configuration, demonstrates electrochemical double layer capacitance mechanism and retains 96% of its initial capacitance after 20 000 electrochemical charging/discharging cycles with the specific capacitance value of 82 F g-1 and low equivalent series resistance of 4.6 . The stretchable supercapacitor prototype withstands at least 1000 cycles of 50% strain with a slight increase in the volumetric capacitance from 0.4 to 0.5 mF cm-3 and volumetric power density from 32 mW cm-3 to 40 mW cm-3 after stretching, which is higher than reported before. Moreover, a low resistance of 250 for the as-fabricated stretchable prototype was obtained, which slightly decreased with the strain applied up to 200 . Simple fabrication process of such devices can be easily extended making the all-nanotube stretchable supercapacitors, presented here, promising elements in future wearable devices.
|Publication status||Published - 1 Dec 2017|
|MoE publication type||A1 Journal article-refereed|