Sirkka-Liisa Jämsä-Jounela

Research outputs

  1. 2011
  2. Published

    Dynamic modelling of a BioGrate boiler as a basis for Fault Detection and Diagnosis

    Boriouchkine, A., Zakharov, A. & Jämsä-Jounela, S-L., 2011, 1st Papyrus workshop on Fault Diagnosis and Fault Tolerant Control in large scale processing industries, Korsika, Ranska, 6-7.10.2011. p. 1-6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  3. Published

    Fault Analysis as a Tool for Fault Detection and Diagnosis Development in Large-Scale Systems

    Laavi, H., Tikkala, V-M., Myller, T., Kulomaa, T., Hämäläinen, V. & Jämsä-Jounela, S-L., 2011, PAPYRUS 1st PAPYRUS Workshop on Fault Diagnosis and Fault Tolerant Control in large scale processing industries, Porticcio, Ranska, 6.-7.10.2011..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Fault Diagnosis Methods and their Applications in the Process industry

    Jämsä-Jounela, S-L., 2011, COSY International conference on complex systems: synergy of control, communications and computing, COSY 2011. Kolemisevska-Gugulovska, T. & Stankovski, M. (eds.). Skopje: Macedonian NMO of IFAC, p. 201-206

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Fuel quality soft-sensor using dynamic superheater model for control strategy improvement of the Biopower 5 CHP plant

    Kortela, J. & Jämsä-Jounela, S-L., 2011, AutomaatioXIX seminar 2011, Helsinki, Finland, March 15-16 , 2011. Visala, A. (ed.). Helsinki: Suomen Automaatioseura ry

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published
  7. 2010
  8. Published

    A Two Phase MPC and its Application to a Grinding Process

    Zakharov, A., Boriouchkine, A. & Jämsä-Jounela, S-L., 2010, Conference of Control and Fault-Tolerant Systems (SysTol’10), Nice, France, 6-8 Oct 2010. IEEE, p. 534-539 (Conference on Control and Fault-Tolerant Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  9. Published

    A Two Phase MPC and its Application to a Grinding Process

    Zakharov, A., Jämsä-Jounela, S-L. & Boriouchkine, A., 2010, Nordic Process Control Workshop, Lund, Sweden, August 25-27, 2010. Hägglund, T. (ed.). Department of Automatic Control, Lund University, p. 21-26

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Detection and Isolation of Oscillations Using the Dynamic Causal Digraph Method

    Tikkala, V-M., Zakharov, A. & Jämsä-Jounela, S-L., 2010, Conference on Control and Fault-Tolerant Systems (SysTol'10), Nice, France, October 6-9, 2010. Nice: CRAN Research Centre for Automatic Control of Nancy, p. 393-397 (Conference on Control and Fault-Tolerant Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Detection and Isolation of Oscillations Using the Dynamic Causal Digraph Method

    Tikkala, V-M., Zakharov, A. & Jämsä-Jounela, S-L., 2010, Nordic Process Control Workshop, Lund, Sweden, August 25-27, 2010. Hägglund, T. (ed.). Lund: Department of Automatic Control, Lund University, p. 48-53

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  12. Published

    Dynamic Modelling of combustion in a BioGrate furnace; a sensitivity analysis on the fuel quality and combustion air aupply

    Boriouchkine, A., Zakharov, A. & Jämsä-Jounela, S-L., 2010, 16th Nordic Process Control Workshop, Lund, 25-27.8.2010. Hägglund, T. (ed.). Lund: Lund University, p. 12-17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Fuel moisture content analysis as a basis for process monitoring of a BioGrate boiler

    Boriouchkine, A., Zakharov, A. & Jämsä-Jounela, S-L., 2010, 8th European ACD2010 Workshop on Advanced Control and Diagnosis, Ferrara, Italy 2010.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Fuel quality soft-sensor for control strategy improvement of the Biopower 5 CHP plant

    Kortela, J. & Jämsä-Jounela, S-L., 2010, SysTol Conference on Control and Fault-Tolerant Systems (SysTol’10), Nice, France 6-8 October, 2010. Georges, J-P. (ed.). France: Nancy-University, p. 221-226 (Conference on Control and Fault-Tolerant Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. 2009
  16. Published

    Application of the Enhanced Dynamic Causal Digraph Method on a Three-Layer Board Machine

    Hui, C., Tikkala, V-M. & Jämsä-Jounela, S-L., 2009, European Control Conference,Budapest,August 23-26,2009. Budapest: EUCA, p. 3112-3117

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    A two-phase objective function for a constrained MPC and its application to a grinding plant

    Zakharov, A., Boriouchkine, A. & Jämsä-Jounela, S-L., 2009, In : IFAC PROCEEDINGS VOLUMES. 42, 23, p. 31-36

    Research output: Contribution to journalConference articleScientificpeer-review

  18. Published

    Automation and Robotics in Mining and Mineral Processing

    Jämsä-Jounela, S-L. & Baiden, G., 2009, Handbook of Automation. Nof, S. (ed.). Berlin Heidelberg, p. 1001-1014

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  19. Published

    Control of Industrial Copper Solvent Extraction Process

    Komulainen, T., Rantala, A., Doyle, F. & Jämsä-Jounela, S-L., 2009, In : Journal of Process Control. 19, 1, p. 2-15

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Embedded Control and Monitoring Systems in Production Machine Networks

    Jämsä-Jounela, S-L. & Huovinen, M., 2009, 10th International Sympsium on Process Systems Engineering, Salvador, 17-20.8.2009. Elsevier, p. 1311-1316

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Fault Tolerant Control for a Dearomatisation Process

    Sourander, M., Vermasvuori, M., Sauter, D., Liikala, T. & Jämsä-Jounela, S-L., 2009, In : Journal of Process Control. 19, 7, p. 1091-1102

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Networked control with delay measurement and estimation

    Vatanski, N., Georges, J-P., Aubrun, C. & Jämsä-Jounela, S-L., 2009, In : Control Engineering Practice. 17, 2, p. 231-244

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Optimization of the Pulp Mill Economical Efficiency: Study on the Behaviour Effect of the Economically Significant Variables

    Zakharov, A. & Jämsä-Jounela, S-L., 2009, In : IFAC PROCEEDINGS VOLUMES. 42, 2, p. 263-268

    Research output: Contribution to journalConference articleScientificpeer-review

  24. 2008
  25. Published

    An Application of the Enhanced Dynamic Causal Digraph Fault Diagnosis Method on a Three-layer Board Machine

    Cheng, H., Tikkala, V-M. & Jämsä-Jounela, S-L., 2008, Automaatio XVIII Seminaari, Helsinki, Suomi, 17.-18.3.2009. Helsinki: Suomen Automaatioseura ry

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    An embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process

    Kettunen, M., Zhang, P. & Jämsä-Jounela, S-L., 2008, In : Computers and Chemical Engineering. 32, 12, p. 2966-2985

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Application of dynamic causal digraph method for fault diagnosis on wastewater treatment process

    Cheng, H., Mulas, M. & Jämsä-Jounela, S-L., 2008, Automaatio XVIII Seminaari, Helsinki, Suomi, 17.-18.3.2009. Ketonen, M. (ed.). Helsinki: Suomen Automaatioseura ry

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Current status and future trends in process automation

    Jämsä-Jounela, S-L., 2008, Automining*08, Santiago,Chile, 23-25.4.2008.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Evaluation of PCA methods with improved fault isolation capabilities on a paper machine simulator

    Cheng, H., Nikus, M. & Jämsä-Jounela, S-L., 2008, In : Chemometrics and Intelligent Laboratory Systems. 92, 2, p. 186-199

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Fault detection and isolation of an online analyzer for an ethylene cracking process

    Kämpjärvi, P., Sourander, M., Komulainen, T., Nikus, M., Vatanski, N. & Jämsä-Jounela, S-L., 2008, In : Control Engineering Practice. 16, p. 1-13

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Fault Diagnosis of the Paper Machine Short Circulation Process using Novel Dynamic Causal Digraph Reasoning

    Cheng, H., Nikus, M. & Jämsä-Jounela, S-L., 2008, In : Journal of Process Control. 18, 7-8, p. 676-691

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    FTC based on data driven FDI for a dearomatisation process

    Vermasvuori, M., Sourander, M., Liikala, T., Sauter, D. & Jämsä-Jounela, S-L., 2008, 16th Mediterranean Conference on Control and Automation, Corsica, 25-27 June. Sauter, D. (ed.). Nancy-Université, Faculté des Sciences et Techniques, p. 71-78

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    New time variant control system design for networked control systems

    Vatanski, N., Ylinen, R. & Jämsä-Jounela, S-L., 2008, Mathematical Theory of Networks and Systems (MTNS) 2008, Virginia Tech, USA, July 28-August 2,2008. Ball, J. (ed.). Virginia Tech

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Novel Causal Digraph Reasoning For Fault Diagnosis with Application on the Paper Machine Short Circulation Process

    Cheng, H., Nikus, M. & Jämsä-Jounela, S-L., 2008, In : IFAC PROCEEDINGS VOLUMES. 41, 2, p. 11118-11123

    Research output: Contribution to journalConference articleScientificpeer-review

  35. Published

    Operational decision making in the process industry; Multidiciplinary approach

    Mätäsniemi, T., Ritala, R., Leiviskä, K. & Jämsä-Jounela, S-L., 2008, VTT Tiedotteita, Issue 2442,2008,1-139. ESpoo: VTT, p. 1-139

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  36. Published

    Optimization of the Pulp Mill Economical Efficiency; study on the behavior effect of the economically significant variables

    Zakharov, A. & Jämsä-Jounela, S-L., 2008, Automaatio XVIII Seminaari, Helsinki, Suomi, 17.-18.3.2009. Ketonen, M. (ed.). Helsinki: Suomen Automaatioseura ry

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Plant-wide disturbance assessment with an application on a paper making process

    Zhang, D., Cheng, H. & Jämsä-Jounela, S-L., 2008, Automaatio XVIII Seminaari, Helsinki, Suomi, 17.-18.3.2009. Ketonen, M. (ed.). Helsinki: Suomen Automaatioseura ry

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. 2007
  39. Published

    Future trends in process automation

    Jämsä-Jounela, S. L., 29 Nov 2007, In : ANNUAL REVIEWS IN CONTROL. 31, 2, p. 211-220 10 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  40. Published

    Activity Report 2003-2006

    Jämsä-Jounela, S-L., 2007, Espoo, (TKK, Laboratory of process control and automation reports).

    Research output: Working paperProfessional

  41. Published

    A dynamic model of the paper machine short circulation process

    Nikus, M., Cheng, H. & Jämsä-Jounela, S-L., 2007, Espoo, p. 96, (14th Nordic Process Control Workshop, Espoo, Finland, 23rd-25th August, 2007).

    Research output: Working paperProfessional

  42. Published

    An Embedded Fault Detection, Isolation and Accommodation System in a Model Predictive Controller for an Industrial Benchmark Process

    Kettunen, M. & Jämsä-Jounela, S-L., 2007, 14th Nordic Control Workshop, Espoo, 2007. Jämsä-Jounela, S-L. (ed.). Espoo: NPCG, p. 130-135

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    A new fault diagnosis method for process components based on causal digraph and parameter estimation methods - with application on the paper making process

    Cheng, H., Nikus, M. & Jämsä-Jounela, S-L., 2007, Automaatio päivät 07, Helsinki, 27th-28th, March.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Compensating the transmission delay in networked control systems

    Vatanski, N., Georges, J-P., Aubrun, C., Rondeau, E. & Jämsä-Jounela, S-L., 2007, AP07 Seminaaripäivät 2007. Suomen Automaatioseura

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Compensating the transmission delay in networked control systems

    Vatanski, N., Georges, J-P., Aubrun, C., Rondeau, E. & Jämsä-Jounela, S-L., 2007, 14th Nordic Process Control Workshop, Espoo,2007. Jämsä-Jounela, S-L. (ed.). Espoo: NPCG, p. 153-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Data-based fault detection of the online analysers in a dearomatisation process

    Vermasvuori, M., Vatanski, N., Liikala, T. & Jämsä-Jounela, S-L., 2007, AP07,Seminaaripäivät 2007,Helsinki. Suomen Automaatioseura

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Design,development and testing of an online process monitoring system

    Tuononen, L. & Jämsä-Jounela, S-L., 2007, Espoo, (14th Nordic Process Control Workshop,Espoo,2007).

    Research output: Working paperProfessional

  48. Published

    Effect of speed and accuracy of on-line elemental analysis on flotation control performance

    Remes, A., Saloheimo, K. & Jämsä-Jounela, S-L., 2007, In : Minerals Engineering. 20, 11, p. 1055-1066

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Enhanced Causal digraph reasoning for fault diagnosis with application on the paper machine short circulation

    Hui, C., Nikus, M. & Jämsä-Jounela, S-L., 2007, 3rd International Workshop on Networked Control systems ;tolerant to faults, nancy,20-21 June,2007. Rondeau, E. (ed.). nancy

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Enhanced Causal Digraph Reasoning For Fault Diagnosis With Application On The Paper Machine Short Circulation Process

    Cheng, H., Nikus, M. & Jämsa-Jounela, S-L., 2007, 5th Advanced control and diagnosis, 15-16, Nov.2007, Grenoble, France.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    ENHANCED CAUSAL DIGRAPH REASONING FOR FAULT DIAGNOSIS WITH APPLICATION ON THE PAPER MACHINE SHORT CIRCULATION PROCESS

    Cheng, H., Nikus, M. & Jämsä-Jounela, S-L., 2007, 14th Nordic Process Control Workshop, Espoo, Finland, 23rd-25th August 2007. Jämsä-Jounela, S-L. (ed.). Espoo, p. 136-141

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  52. Published

    Future Trends in Process Automation

    Jämsä-Jounela, S-L., 2007, In : ANNUAL REVIEWS IN CONTROL. 31, p. 211-220

    Research output: Contribution to journalArticleScientificpeer-review

  53. Published

    Future Trends in Process Automation

    Jämsä-Jounela, S-L., 2007, In : IFAC PROCEEDINGS VOLUMES. 40, 1, p. 1-10

    Research output: Contribution to journalConference articleScientificpeer-review

  54. Published

    Offline testing of the FTC-strategy for dearomasation process of the Naantali refinary

    Sourander, M., Liikala, T., Vermasvuori, M. & Jämsä-Jounela, S-L., 2007, 3rd NeCST workshop, Nancy, 20-21.6.2007. Nancy,France

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Offline testing of the FTC-strategy for dearomatization process of the Naantali refinary

    Sourander, M., Liikala, T., Vermasvuori, M. & Jämsä-Jounela, S-L., 2007, 14th Nordic Process Control Workshop. Jämsä-Jounela, S-L. (ed.). Espoo: NPCG, p. 120-125

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 96529