Quan Zhou

Professor (Associate Professor)

Research outputs

  1. 2019
  2. E-pub ahead of print
  3. E-pub ahead of print

    Tunable and Magnetic Thiol-ene Micropillar Arrays

    Al-Azawi, A., Cenev, Z., Tupasela, T., Peng, B., Ikkala, O., Zhou, Q., Jokinen, V., Franssila, S. & Ras, R., 28 Nov 2019, In : Macromolecular Rapid Communications. p. 1-6 6 p., 1900522.

    Research output: Contribution to journalArticle

  4. Published

    Capillary Transport of Miniature Soft Ribbons

    Chang, B., Liu, H., Ras, R. & Zhou, Q., 11 Oct 2019, In : MICROMACHINES. 10, p. 1-10 684.

    Research output: Contribution to journalArticle

  5. Published

    Potential of Laser Doppler Flowmetry in the Medical Needle Insertion Procedures

    Kravtcova, A. & Zhou, Q., 7 Oct 2019, Proceedings of the 41th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2019. Institute of Electrical and Electronics Engineers, p. 71-74 4 p. (Annual International Conference of the IEEE Engineering in Medicine and Biology Society).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Formation of nanospikes on AISI 420 martensitic stainless steel under gallium ion bombardment

    Cenev, Z., Bartenwerfer, M., Klauser, W., Jokinen, V., Fatikow, S. & Zhou, Q., 1 Oct 2019, In : Nanomaterials. 9, 10, 9 p., 1492.

    Research output: Contribution to journalArticle

  7. Published

    Rapid mode-switching for acoustic manipulation

    Latifi, K., Kopitca, A. & Zhou, Q., 1 Jul 2019, Proceedings of the 4th International Conference on Manipulation, Automation, and Robotics at Small Scales, MARSS 2019. Haliyo, S., Sill, A., Zhou, Q., Kallio, P. & Fatikow, S. (eds.). Institute of Electrical and Electronics Engineers, 6 p. 8860952

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    Folo: Latency and Quality Optimized Task Allocation in Vehicular Fog Computing

    Zhu, C., Tao, J., Pastor Figueroa, G., Xiao, Y., Ji, Y., Zhou, Q., Li, Y. & Ylä-Jääski, A., Jun 2019, In : IEEE Internet of Things Journal. 6, 3, p. 4150 - 4161 12 p.

    Research output: Contribution to journalArticle

  9. Published

    Motion of Heavy Particles on a Submerged Chladni Plate

    Latifi, K., Wijaya, H. & Zhou, Q., 10 May 2019, In : Physical Review Letters. 122, 18, p. 1-5 184301.

    Research output: Contribution to journalArticle

  10. Published

    Two-Dimensional Manipulation in Mid-Air Using a Single Transducer Acoustic Levitator

    Wijaya, H., Latifi, K. & Zhou, Q., 1 Apr 2019, In : MICROMACHINES. 10, 4, 11 p., 257.

    Research output: Contribution to journalArticle

  11. Published

    A Generalized Predictive Control-Based Path Following Method for Parafoil Systems in Wind Environments

    Tao, J., Dehmer, M., Xie, G. & Zhou, Q., 18 Mar 2019, In : IEEE Access. 7, p. 42586-42595 10 p., 6287639.

    Research output: Contribution to journalArticle

  12. Published

    Path following control for towing system of cylindrical drilling platform in presence of disturbances and uncertainties

    Tao, J., Du, L., Dehmer, M., Wen, Y., Xie, G. & Zhou, Q., 2019, In : ISA Transactions. 95, p. 185-193 9 p.

    Research output: Contribution to journalArticle

  13. 2018
  14. Published

    Nanoliter deposition on star-shaped hydrophilic–superhydrophobic patterned surfaces

    Chang, B., Kivinen, O., Pini, I., Levkin, P. A., Ras, R. & Zhou, Q., 16 Aug 2018, In : Soft Matter. 14, 36, p. 7500-7506 7 p.

    Research output: Contribution to journalArticle

  15. Published

    Superoleophobic Slippery Lubricant-Infused Surfaces: Combining Two Extremes in the Same Surface

    Dong, Z., Schumann, M. F., Hokkanen, M. J., Chang, B., Welle, A., Zhou, Q., Ras, R. H. A., Xu, Z., Wegener, M. & Levkin, P. A., Aug 2018, In : Advanced Materials. 30, 45, 7 p., 1803890.

    Research output: Contribution to journalArticle

  16. Published
  17. Published

    Phase transitions as intermediate steps in the formation of molecularly engineered protein fibers

    Mohammadi, P., Aranko, A. S., Lemetti, L., Cenev, Z., Zhou, Q., Virtanen, S., Landowski, C. P., Penttilä, M., Fischer, W. J., Wagermaier, W. & 1 others, Linder, M., 2018, In : Communications Biology. 1, 86.

    Research output: Contribution to journalArticle

  18. 2017
  19. Published

    Laser-Assisted Mist Capillary Self-Alignment

    Chang, B., Zhu, Z., Koverola, M. & Zhou, Q., 15 Dec 2017, In : MICROMACHINES. 8, 12, p. 1-10 10 p., 361.

    Research output: Contribution to journalArticle

  20. Published

    Mapping microscale wetting variations on biological and synthetic water-repellent surfaces

    Liimatainen, V., Vuckovac, M., Jokinen, V., Sariola, V., Hokkanen, M., Zhou, Q. & Ras, R., 27 Nov 2017, In : Nature Communications. 8, 1, p. 1-7 1798 .

    Research output: Contribution to journalArticle

  21. Published

    Manipulating Superparamagnetic Microparticles with an Electromagnetic Needle

    Cenev, Z., Zhang, H., Sariola, V., Rahikkala, A., Liu, D., Santos, H. A. & Zhou, Q., 16 Oct 2017, In : Advanced Materials Technologies. 3, 1, p. 1700177 9 p.

    Research output: Contribution to journalArticle

  22. Published

    Improving fleet management in mines: The benefit of heterogeneous match factor

    Chaowasakoo, P., Seppälä, H., Koivo, H. & Zhou, Q., Sep 2017, In : European Journal of Operational Research. 261, 3, p. 1052-1065

    Research output: Contribution to journalArticle

  23. Published

    Hybrid microassembly combining laser die transfer and capillary self-alignment

    Chang, B., Koverola, M., Ge, Z. & Zhou, Q., 8 Aug 2017, 2017 International Conference on Manipulation, Automation and Robotics at Small Scales (MARSS). IEEE, 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Multi-particle acoustic manipulation on a Chladni plate

    Latifi, K., Wijaya, H. & Zhou, Q., 17 Jul 2017, Proceedings of the IEEE International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017. IEEE, p. 1-7 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Digitalization of mine operations: Scenarios to benefit in real-time truck dispatching

    Chaowasakoo, P., Seppälä, H., Koivo, H. & Zhou, Q., 1 Mar 2017, In : International Journal of Mining Science and Technology. 27, 2, p. 229-236 8 p.

    Research output: Contribution to journalArticle

  26. Published

    Surface tension-driven self-alignment

    Mastrangeli, M., Zhou, Q., Sariola, V. & Lambert, P., 2017, In : Soft Matter. 13, 2, p. 304-327 24 p.

    Research output: Contribution to journalReview Article

  27. Published

    Vision based event classification in robotic micromanipulation

    Cenev, Z., Venäläinen, J. & Zhou, Q., 2017, Proceedings of the 2017 International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2017. IEEE, 6 p. 8001923

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. 2016
  29. Published

    Controlling the motion of multiple objects on a Chladni plate

    Zhou, Q., Sariola, V., Latifi, K. & Liimatainen, V., 9 Sep 2016, In : Nature Communications. 7, 12764.

    Research output: Contribution to journalArticle

  30. Published

    Object tracking in robotic micromanipulation by supervised ensemble learning classifier

    Cenev, Z., Venäläinen, J., Sariola, V. & Zhou, Q., 6 Sep 2016, Proceedings of the 2016 International Conference on Manipulation, Automation and Robotics at Small Scales, MARSS 2016. Institute of Electrical and Electronics Engineers, 7561733

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Maskless, High-Precision, Persistent, and Extreme Wetting-Contrast Patterning in an Environmental Scanning Electron Microscope

    Liimatainen, V., Shah, A., Johansson, L-S., Houbenov, N. & Zhou, Q., 13 Apr 2016, In : Small. 12, 14, p. 1847-1853 7 p.

    Research output: Contribution to journalArticle

  32. Published

    Sliding droplets on hydrophilic/superhydrophobic patterned surfaces for liquid deposition

    Chang, B., Zhou, Q., Ras, R. H. A., Shah, A., Wu, Z. & Hjort, K., 11 Apr 2016, In : Applied Physics Letters. 108, 15, p. 1-4 154102.

    Research output: Contribution to journalArticle

  33. Published

    Capillary self-alignment of microchips on soft substrates

    Chang, B., Zhou, Q., Wu, Z., Liu, Z., Ras, R. H. A. & Hjort, K., 1 Mar 2016, In : MICROMACHINES. 7, 3, p. 1-9 41.

    Research output: Contribution to journalArticle

  34. 2015
  35. Published

    Self-transport and self-alignment of microchips using microscopic rain

    Chang, B., Shah, A., Zhou, Q., Ras, R. H. A. & Hjort, K., 9 Oct 2015, In : Scientific Reports. 5, p. 1-8 14966.

    Research output: Contribution to journalArticle

  36. 2014
  37. Published

    Microsystem integration using hybrid microassembly

    Zhou, Q., Liimatainen, V. & Routa, I., 18 Nov 2014, Proceedings of the 5th Electronics System-Integration Technology Conference, ETC 2014. Institute of Electrical and Electronics Engineers, 6 p. 6962768

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Characterization of nano-coated micro- and nanostructures by pushing

    Liimatainen, V., Venäläinen, J., Koverola, M., Lyytinen, J., Rontu, V., Berdova, M., Koskinen, J., Franssila, S. & Zhou, Q., 2014, International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale,Taipei, Taiwan, October 27-31, 2014. p. 23-27 (International Conference on Manipulation Manufacturing and Measurement on the Nanoscale).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    Hydrophilic-superhydrophobic Patterned Surface for Parallel Microassembly

    Chang, B., Shah, A., Hjort, K. & Zhou, Q., 2014, Turkey.

    Research output: Working paperProfessional

  40. Published

    Interfacial mechanical testing of atomic layer deposited TiO2 and Al2O3 on silicon substrate by the use of embedded SiO2 microspheres

    Lyytinen, J., Berdova, M., Hirvonen, P., Liu, X., Franssila, S., Zhou, Q. & Koskinen, J., 2014, In : RSC Advances. 4, 70, p. 37320-37328 9 p.

    Research output: Contribution to journalArticle

  41. Published
  42. Published

    Surface Tension-Driven Self-Alignment of Microchips on Low-Precision Receptors

    Routa, I., Chang, B., Shah, A. & Zhou, Q., 2014, In : Journal of Microelectromechanical Systems. 23, 4, p. 819-828

    Research output: Contribution to journalArticle

  43. Published
  44. 2013
  45. Published
  46. Published

    Hybrid microassembly for 3D integration and heterogeneous integration of microsystem – EU FP7 project FAB2ASM

    Zhou, Q., 1 Jan 2013.

    Research output: Contribution to conferencePaperScientificpeer-review

  47. Published

    Capillary self-alignment assisted hybrid robotic handling for ultra-thin die stacking

    Liimatainen, V., Kharboutly, M., Rostoucher, D., Gauthier, M. & Zhou, Q., 2013, 2013 IEEE International Conference on Robotics and Automation - ICRA 2013, Karlsruhe, Germany, May 6-10, 2013. Karlsruhe, Germany: IEEE, p. 1395-1400

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. Published

    Controlling liquid spreading using microfabricated undercut edges

    Liimatainen, V., Sariola, V. & Zhou, Q., 2013, In : Advanced Materials. 25, 16, p. 2275-2278

    Research output: Contribution to journalArticle

  49. Published

    Experimental Investigation on Hybrid Microassembly of Microchips on Sharp Edged Patterns

    Chang, B., Shah, A. & Zhou, Q., 2013, The Third International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, Suzhou, 2013. p. 182-186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Fusion of robotic microassembly and self-assembly for microsystem integration and thin-chip microassembly for 3D integration

    Zhou, Q. & Gauthier, M., 2013, 2013 IEEE International Conference on Robotics and Automation - Workshops and Tutorials, Karlsruhe, Germany, May 6-10, 2013. Karlsruhe, Germany: IEEE, p. 9-10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  51. Published

    Hybrid microassembly for 3D integration and heterogenous integration of microsystem - EU FP7 Project FAB2ASM

    Zhou, Q., 2013, 7th International Conference & Exhibition on Integration Issues of Miniaturized Systems - MEMS, NEMS, ICs and Electronic Components, Amsterdam, The Netherlands, 13-14 March 2013. Gessner, T. (ed.). Amsterdam, The Netherlands: VDE Verlag, p. 8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  52. Published

    Microassembly for Manufacturing at Small Scales

    Lutz, P., Boehringer, K. F., Clevy, C., Popa, D. & Zhou, Q., 2013, In : IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING. 10, 3, p. 483-484

    Research output: Contribution to journalArticle

  53. Published

    Undercut edges for robust capillary self-alignment in hybrid microassembly

    Liimatainen, V., Sariola, V. & Zhou, Q., 2013, The 8th Annual IEEE Inteernational Conference on Nano/Micro Engineered and Molecular Systems (IEEE NEMS2013), Suzhou, China, April 7-10, 2013. Suzhou, China: IEEE, p. 4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. 2012
  55. Published

    Force sensing using artificial magnetic cilia

    Virta, A., Timonen, J. V. I., Ras, R. H. A. & Zhou, Q., 2012, IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2012), Vilamoura, Algarve, Portugal, October 7-12, 2012. Vilamoura, Algarve, Portugal: IEEE, p. 1-6 6 p. (IEEE International Conference on Intelligent Robots and Systems).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Fusion of robotics and capillary selfassembly for desktop manufacturing

    Sariola, V., Liimatainen, V. & Zhou, Q., 2012, The 8th International Workshop on Micro Factories (IWMF 2012), Tampere, Finland, June 17-20, 2012. Tampere, Finland: TUT; DTF, p. 7

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    High-accuracy positioning of microchips on patterns with jagged edges using hybrid microassembly

    Chang, B., Liimatainen, V., Routa, I. & Zhou, Q., 2012, 2012 IEEE International Conference on Mechatronics and Automation (IEEE ICMA 2012), Chengdu, China, August 5-8, 2012.. Chengdu, China: IEEE, p. 6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  58. Published

    Hybrid microassembly for massively parallel assembly of microchips with water mist

    Chang, B., Virta, A. & Zhou, Q., 2012, The Second International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO 2012), Xi'an, China, 29 August 1 September 2012. Xi'an, China: Xi'an Technological University, p. 6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 Next

ID: 90701