Photo of Petri Kuosmanen

Petri Kuosmanen

  • Phone+358500448481
  • Otakaari 4

1992 …2020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Anthology
Open Access
Article

3D-hiotuilla teloilla parempaa paperia

Kuosmanen, P., Häkkinen, T. & Juhanko, J., 2001, In : Kunnossapito. 5, p. 40-43

Research output: Contribution to journalArticleScientificpeer-review

3D-teknologia tulossa myös telasorveihin

Kuosmanen, P., 2005, In : Kunnossapito. 8, p. 49-51

Research output: Contribution to journalArticleScientificpeer-review

A 3D turning system to reduce geometry errors of flexible rotors

Widmaier, T., Kuosmanen, P., Haikio, J. & Väänänen, P., 2004, In : Proceedings of the Estonian Academy of Sciences Engineering. 10, 4, p. 251-260

Research output: Contribution to journalArticleScientificpeer-review

Active Vibration Control of a Paper Machine Roll

Juhanko, J., Porkka, E., Kuosmanen, P., Valkonen, A. & Järviluoma, M., 2007, In : Kunnossapito. 21, 4, p. 32-34

Research output: Contribution to journalArticleProfessional

1 Citation (Scopus)

Adhesion and tribological properties of hydrophobin proteins in aqueous lubrication on stainless steel surfaces

Hakala, T. J., Laaksonen, P., Saikko, V., Ahlroos, T., Helle, A., Mahlberg, R., Hähl, H., Jacobs, K., Kuosmanen, P., Linder, M. & Holmberg, K., 2012, In : RSC Advances. 2, 26, p. 9867-9872 6 p.

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Analysis of sensor platform dynamics in ground vehicle

Mattila, S., Kostamo, J., Porkka, E., Kuosmanen, P. & Heikkilä, H., 2006, In : IEEE Aerospace and Electronic Systems Magazine. 21, 8, p. 9-14

Research output: Contribution to journalArticleScientificpeer-review

A non-circular grinding of backup rolls to reduce rolling force variations

Widmaier, T., Uusimäki, J., Kuosmanen, P., Juhanko, J. & Väänänen, P., 2007, In : ESTONIAN JOURNAL OF ENGINEERING. 13, 2, p. 168-179

Research output: Contribution to journalArticleScientificpeer-review

Application of Monte Carlo simulation for estimation of uncertainty of four-point roundness measurements of rolls

Widmaier, T., Hemming, B., Juhanko, J., Kuosmanen, P., Esala, V. P., Lassila, A., Laukkanen, P. & Haikio, J., Apr 2017, In : PRECISION ENGINEERING: JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISIONENGINEERING AND NANOTECHNOLOGY. 48, p. 181–190 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
22 Citations (Scopus)
347 Downloads (Pure)

A practical millimeter wave radar calibration target

Ruoskanen, J., Eskelinen, P., Kuosmanen, P. & Kiuru, T., 2004, In : IEEE Antennas and Propagation Magazine. 46, 2, p. 94-97

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Device and method for measuring thickness variation of large roller element bearing rings

Viitala, R., Viitala, R., Gruber, G., Hemming, B., Widmaier, T., Tammi, K. & Kuosmanen, P., 1 Jan 2019, In : Precision Engineering. 55, p. 59-69 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
123 Downloads (Pure)

Digital design and manufacturing process comparison for new custom made product family - a case study of a bathroom faucet

Widmaier, T., Juhanko, J., Piili, H., Kuosmanen, P., Salminen, A., Happonen, A., Kontio, J. & Nyrhilä, O., 2013, In : ESTONIAN JOURNAL OF ENGINEERING. 19, 1, p. 76-89

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Digital Design Process and Additive Manufacturing of a Configurable Product

Piili, H., Widmaier, T., Happonen, A., Juhanko, J., Salminen, A., Kuosmanen, P. & Nyrhilä, O., 2013, In : ADVANCED SCIENCE LETTERS. 19, 3, p. 926-931

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Dynamic geometry of a rotating cylinder with shell thickness variation

Juhanko, J., Porkka, E., Widmaier, T. & Kuosmanen, P., 2010, In : ESTONIAN JOURNAL OF ENGINEERING. 16, 4, p. 285-296

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Ennakoiva 3D-hionta - uusi kunnossapidon työkalu

Kuosmanen, P., 2004, In : Kunnossapito. 4, p. 56

Research output: Contribution to journalArticleScientificpeer-review

Forming and dewatering of a microfibrillated cellulose composite paper

Rantanen, J., Dimic-Misic, K., Pirttiniemi, J., Kuosmanen, P. & Maloney, T., 2015, In : BioResources. 10, 2, p. 3492-3506

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Granular jamming based robotic gripper for heavy objects

Miettinen, J., Frilund, P., Vuorinen, I., Kuosmanen, P. & Kiviluoma, P., 2019, In : Proceedings of the Estonian Academy of Sciences. 68, 4, p. 421–428 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
58 Downloads (Pure)

Intelligent Interfacing Module of Process Capability among Product and Process Development Systems in Virtual Environment

Bargelis, A., Kuosmanen, P. & Stasiskis, A., 2009, In : STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING. 35, 9, p. 561-569

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Interferometric step gauge for CMM verification

Hemming, B., Esala, V-P., Laukkanen, P., Rantanen, A., Viitala, R., Widmaier, T., Kuosmanen, P. & Lassila, A., Jul 2018, In : Measurement Science and Technology. 29, 7, 6 p., 074012.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
142 Downloads (Pure)

Internet of Things Based Monitoring of Large Rotor Vibration With a Microelectromechanical Systems Accelerometer

Koene, I., Viitala, R. & Kuosmanen, P., 2019, In : IEEE Access. 7, p. 92210-92219 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
109 Downloads (Pure)

Kokillivalettujen termotelojen ultraäänimittaus

Widmaier, T., Pirttiniemi, J., Juhanko, J. & Kuosmanen, P., 2009, In : Promaint. 2, p. 22-28

Research output: Contribution to journalArticleProfessional

Method for analysing the functionality and sensitivity of a mechanism by combined Computer Aided Tolerance analysis and Multi-Body Systems simulation.

Makkonen, P., Kuosmanen, P., Münster, R., Mäkeläinen, E. & Ramseier, Y., 2007, In : Engineering Mechanics: journal for theoretical and applied mechanics . 14, 3, p. 131-142

Research output: Contribution to journalArticleScientificpeer-review

Method for in situ runout measurement of large rolls

Kiviluoma, P., Porkka, E., Pirttiniemi, J. & Kuosmanen, P., 2011, In : ESTONIAN JOURNAL OF ENGINEERING. 17, 1, p. 28-38

Research output: Contribution to journalArticleScientificpeer-review

Mikrokontaktprintimine metallpindadele deformatsioonide optiliseks mõõtmiseks

Coren, F., Palestini, C., Lehto, M., Bossuyt, S., Kiviluoma, P., Korhonen, A. & Kuosmanen, P., 2017, In : Proceedings of the Estonian Academy of Sciences. 66, 2, p. 184-188 5 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
29 Downloads (Pure)

Modernisoinnin vaikutus vastatelan dynaamiseen käyttäytymiseen

Kuosmanen, P., Juhanko, J. & Pullinen, J., 1998, In : Paperi ja Puu - Paper and Timber. 80, 3, p. 162-166

Research output: Contribution to journalArticleScientificpeer-review

Pallo hallinnassa!

Hyötyniemi, H. & Kuosmanen, P., 2002, In : Automaatioväylä. 6, p. 42

Research output: Contribution to journalArticleProfessional

Paperikoneen telojen aktiivinen värähtelynhallinta

Juhanko, J., Kuosmanen, P., Järviluoma, M., Porkka, E. & Valkonen, A., 2006, In : Kunnossapito. 8, p. 28-30

Research output: Contribution to journalArticleProfessional

Paperin laatuvaihtelu kuriin telojen 3D-hionnalla

Kuosmanen, P., Häkkinen, T. & Juhanko, J., 2003, In : Kunnossapito. 4, p. 6-9

Research output: Contribution to journalArticleProfessional

Predictive 3D grinding - a new paradigm for roll maintenance

Kuosmanen, P., 2004, In : Maintenance. 4, p. 28-32

Research output: Contribution to journalArticleScientificpeer-review

Reducing thickness variation of hot rolled steel strip by non-circular backup roll geometry

Widmaier, T., Salmela, T., Kuosmanen, P., Juhanko, J., Kärhä, P. & Uusimäki, J., 2009, In : Ironmaking and Steelmaking. 36, 2, p. 133-140

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Shape fidelity and structure of 3D printed high consistency nanocellulose

Klar, V., Pere, J., Turpeinen, T., Kärki, P., Orelma, H. & Kuosmanen, P., 7 Mar 2019, In : Scientific Reports. 9, 1, 10 p., 3822.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
147 Downloads (Pure)

Spinning Approach for Cellulose Fiber Yarn Using a Deep Eutectic Solvent and an Inclined Channel

Klar, V., Orelma, H., Rautkoski, H., Kuosmanen, P. & Harlin, A., 30 Sep 2018, In : ACS Omega. 3, 9, p. 10918-10926 9 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
3 Citations (Scopus)
213 Downloads (Pure)

Structural characterization and tribological evaluation of quince seed mucilage

Hakala, T. J., Saikko, V., Arola, S., Ahlroos, T., Helle, A., Kuosmanen, P., Holmberg, K., Linder, M. B. & Laaksonen, P., Sep 2014, In : Tribology International. 77, p. 24-31

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)
Open Access
File
9 Citations (Scopus)
155 Downloads (Pure)

Telageometria muuttuu tuotanto-olosuhteissa

Widmaier, T., Juhanko, J. & Kuosmanen, P., 2008, In : Promaint. 7, p. 55-59

Research output: Contribution to journalArticleProfessional

The effect of acetabular cup position on wear of a large-diameter metal-on-metal prosthesis studied with a hip joint simulator

Saikko, V., Ahlroos, T., Revitzer, H., Ryti, O. & Kuosmanen, P., 2013, In : Tribology International. 60, April, p. 70-76

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Uncertainty analysis of phase and amplitude of harmonic components of bearing inner ring four-point roundness measurement

Viitala, R., Widmaier, T., Hemming, B., Tammi, K. & Kuosmanen, P., 2018, In : Precision Engineering. 54, p. 118-130

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
225 Downloads (Pure)
Open Access
File
3 Citations (Scopus)
125 Downloads (Pure)

Valssausvoiman vaihtelu pienenee tukivalssin 3D-hionnan avulla

Juhanko, J., Kuosmanen, P., Uusimäki, J. & Widmaier, T., 2008, In : Promaint. p. 46-50

Research output: Contribution to journalArticleProfessional

Verringern der Papierqualitätsschwakungen durch 3D-Schleifen der Walzen

Kuosmanen, P., Juhanko, J. & Widmaier, T., 2005, In : Wochenblatt für Papierfabrikation. 11-12, p. 674-682

Research output: Contribution to journalArticleScientificpeer-review

Vibration analysis of paper machine’s asymmetric tube roll supported by spherical roller bearings

Heikkinen, J. E., Ghalamchi, B., Viitala, R., Sopanen, J., Juhanko, J., Mikkola, A. & Kuosmanen, P., 1 May 2018, In : Mechanical Systems and Signal Processing. 104, p. 688-704 17 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
9 Citations (Scopus)
411 Downloads (Pure)

Ystruder: Open source multifunction extruder with sensing and monitoring capabilities

Klar, V., Pearce, J. M., Kärki, P. & Kuosmanen, P., 1 Oct 2019, In : HardwareX. 6, e00080.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
71 Downloads (Pure)
Book

PaperHiTech 97 -huippuseminaari

Kuosmanen, P., 1997, Espoo: Teknillinen korkeakoulu, Koneensuunnittelun laboratorio. 134 p.

Research output: Book/ReportBookProfessional

Chapter

Modelling a chilled cast thermo roll utilising ultrasonic measurement

Widmaier, T., Pirttiniemi, J., Kiviluoma, P., Porkka, E. & Kuosmanen, P., 2011, DAAAM International Scientific Book 2011. Katalinic, B. (ed.). Vienna, Austria: DAAAM International Publishing, p. 347-364

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Ultrasonic inspection of paper machine coatings

Uski, T. & Kuosmanen, P., 2001, Competitive Reliability 1996-2000.Technology Programme Report 5/2001, Final Report. Holmberg, K. (ed.). Helsinki: Tekes, p. 99-101

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Conference contribution

Aalto University - Where science and art meet technology and business

Kuosmanen, P., 2010, 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 22-24th April 2010.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Accelerometer Based in Situ Runout Measurement of Rotors

Kiviluoma, P., Porkka, E., Pirttiniemi, J. & Kuosmanen, P., 2010, 7th International Conference of DAAAM Baltic Industrial Engineering, Tallinn, Estonia, 22-24th April 2010. Kyttner, R. (ed.). p. 197-202

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Active Bearing Element in Vibration Control: A literature Survey

Kostamo, J., Heiskanen, K. & Kuosmanen, P., 2004, Proceedings of XXIX National Symposium in Machine Design, Tampere University of Technology, Finland, 10.-11.6.2004. p. 12-18

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Active vibration control of a paper machine roll

Juhanko, J., Porkka, E., Kuosmanen, P., Valkonen, A. & Järviluoma, M., 2008, 6th International DAAAM Baltic Conference, Industrial Engineering, Tallinn, Estonia, 24-26 April 2008. p. 101-104

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

1 Citation (Scopus)

Active vibration control of large-scale rotors

Kuosmanen, P., Juhanko, J., Porkka, E., Valkonen, A. & Järviluoma, M., 2002, 4th International conference on machine automation ICMA'02, Tampere University of Technology, Tampere, 11-13 September, 2002. p. 411-417

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review