Ph.D in Mechanical Engineering Pedro Vilaça

Professor (Associate Professor)

Research outputs

  1. 2019
  2. Published

    Contactless high-speed eddy current inspection of unidirectional carbon fiber reinforced polymer

    Machado, M. A., Antin, K. N., Rosado, L. S., Vilaça, P. & Santos, T. G., 1 Jul 2019, In : Composites Part B: Engineering. 168, p. 226-235 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Non-destructive microstructural analysis by electrical conductivity: Comparison with hardness measurements in different materials

    Sorger, G. L., Oliveira, J. P., Inácio, P. L., Enzinger, N., Vilaça, P., Miranda, R. M. & Santos, T. G., 1 Mar 2019, In : JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY. 35, 3, p. 360-368 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. 2018
  5. Published

    Fundamentals of force-controlled friction riveting: Part II-Joint global mechanical performance and energy efficiency

    Cipriano, G. P., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 7 Dec 2018, In : Materials. 11, 12, 2489.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Fundamentals of force-controlled friction riveting: Part I-joint formation and heat development

    Cipriano, G. P., Blaga, L. A., dos Santos, J. F., Vilaça, P. & Amancio-Filho, S. T., 15 Nov 2018, In : Materials. 11, 11, 2294.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Effect of processing temperatures on the properties of a high-strength steel welded by FSW

    Sorger, G., Sarikka, T., Vilaça, P. & Santos, T. G., 1 Nov 2018, In : Welding in the World. 62, 6, p. 1173-1185 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Optimization and characterization of friction surfaced coatings of ferrous alloys

    Shariq, M., Srivastava, M., Tripathi, R., Chattopadhyaya, S., Vilaca, P., Gubeljak, N. & Krolczyk, G., Jul 2018, In : MATERIALS TESTING: MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION. 60, 7-8, p. 707-718 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Application of hybrid friction stir channeling technique to improve the cooling efficiency of electronic components

    Karvinen, H., Nordal, D., Galkin, T. & Vilaca, P., May 2018, In : Welding in the World. 62, 3, p. 497-509 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Microstructure Evaluation of Different Materials after Friction Surfacing - A Review

    Saw, K., Shankar, S., Chattopadhyaya, S. & Vilaca, P., 1 Jan 2018, In : Materials Today: Proceedings. 5, 11, p. 24094-24103 10 p.

    Research output: Contribution to journalConference articleScientificpeer-review

  11. Published

    Microstructure and fatigue properties of friction stir welded high-strength steel plates

    Sorger, G., Lehtimäki, E., Hurme, S., Remes, H., Vilaça, P. & Molter, L., 2018, In : Science and Technology of Welding and Joining. 23, 5, p. 380-386 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2017
  13. Published

    Application of Different X-ray Techniques to Improve In-Service Carbon Fiber Reinforced Rope Inspection

    Schumacher, D., Antin, K-N., Zscherpel, U. & Vilaça, P., 1 Dec 2017, In : Journal of Nondestructive Evaluation. 36, 4, 62.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Application of Hybrid Friction Stir Channeling (HFSC) technique to improve the cooling efficiency of electronic components

    Karvinen, H., Nordal, D., Galkin, T. & Santos Vilaca da Silva, P., 2017, 70th International Institute of Welding Annual Assembly and International Conference, IIW 2017. 14 p. III-1799-17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  15. Published

    Characterization of friction surfaced coatings of aisi 316 tool over high-speed-steel substrate

    Kumar, R., Chattopadhyaya, S., Ghosh, A., Krolczyk, G. M., Santos Vilaca da Silva, P., Kumar, R., Srivastava, M., Shariq, M. & Triphathi, R., 2017, In : TRANSACTIONS OF FAMENA. 41, 2, p. 61-76 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Effect of processing temperatures on the properties of high strength steel welded by FSW

    Lourenco Sorger, G., Sarikka, T., Santos Vilaca da Silva, P. & Santos, T. G., 2017, 70th International Institute of Welding Annual Assembly and International Conference, IIW 2017. III-1825-17

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  17. Published

    Effect of titanium on the weldability of thermomechanically rolled high-strength cold-formable steels

    Mourujärvi, J., Tihinen, S., Mehtonen, S., Lahtinen, T., Santos Vilaca da Silva, P., Kaijalainen, A., Porter, D. & Kömi, J., 2017, METAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings. Vol. 2017-January. p. 936-941 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Features and Case Study of Hybrid Friction Stir Channeling

    Karvinen, H., Nordal, D. & Santos Vilaca da Silva, P., 2017, 14th Meeting SVETS Kommissionen AG 52 - FSW Processing: ESAB, Laxå, Sweden. 29-30th August, 2017.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  19. Published

    FSW of Aluminium AA5754 to Steel DX54 with Innovative Overlap Joint

    Sorger, G., Wang, H., Vilaça, P. & Santos, T. G., 2017, In : Welding in the World. 61, 2, p. 257-268 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    New Development and Testing of FSChanneling Technique: HybridFSC

    Karvinen, H., Nordal, D., Santos Vilaca da Silva, P. & Galkin, T., 2017, 10th International Conference on Trends in Welding Research and 9th International Welding Symposium of Japan Welding Society (9WS) . Curran Associates, Inc., p. 376-379 S19-5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Recent developments in FSW assisted by electrical current hybrid process

    Santos, P., Oliveira, J. P., Inácio, P. L., Chen, Y., Santos Vilaca da Silva, P., Miranda, R. M. & Santos, T. G., 2017. 2 p.

    Research output: Contribution to conferencePaperScientificpeer-review

  22. Published

    Surface Integrity Analysis of Abrasive Water Jet-Cut Surfaces of Friction Stir Welded Joints

    Kumar, R., Chattopadhyaya, S., Dixit, A. R., Bora, B., Zelenak, M., Hloch, S., Hlavacek, P., Scucka, J., Klich, J., Sitek, L. & 1 othersSantos Vilaca da Silva, P., 2017, In : International Journal of Advanced Manufacturing Technology. 88, 5-8, p. 1687-1701

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Weldability of Direct-Quenched Steel with a Yield Stress of 960 MPa

    Taavitsainen, J., Santos Vilaca da Silva, P., Porter, D. & Suikkanen, P., 2017, 10th International Conference on Trends in Welding Research and 9th International Welding Symposium of Japan Welding Society (9WS) . Curran Associates, Inc., p. 52-55 S2-2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. 2016
  25. Published

    Production by FSW of free-shape hollow box profile in AA5754 for automotive application

    Taavitsainen, T., Vilaça, P. & Mutanen, T., 1 Nov 2016, In : Welding in the World. 60, 6, p. 1121-1131 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Comparison of fatigue behaviours of AA5052 H32 butt joints fabricated by the CW‐GMAW and FSW processes

    Ribeiro, R. A., Assuncao, P. D. C., Infante, V., Santos Vilaca da Silva, P., Pina Cipriano, G., Moreira, P. M. G. P. & Braga, E. M., Sep 2016.

    Research output: Contribution to conferencePaperScientific

  27. Published

    Application of FSW to Join Aluminium Foil Winding Coils for Electrical Transformers

    Vilaca, P., Mendes, J., Nascimento, F. & Quintino, L., 15 Jun 2016, In : International Journal of Mechanical Systems Engineering . 2, 1, 9 p., 115.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Accepted/In press

    Concept and Architecture of a New Advanced Control for the FSW of Steels

    Lourenco Sorger, G., Santos Vilaca da Silva, P. & Santos, T. G., May 2016, (Accepted/In press) Proceedings of the 11th International Symposium on Friction Stir Welding. TWI Ltd, 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Accepted/In press

    Influence of Process Parameters on Friction Stir Channelling

    Vidal, C., Infante, V. & Santos Vilaca da Silva, P., May 2016, (Accepted/In press) Proceedings of the 11th lnternational Symposium on Friction Stir Welding. TWI Ltd, 20 p. Session 5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    A study on the formability of aluminum tailor welded blanks produced by friction stir welding

    Parente, M., Safdarian, R., Santos, A. D., Loureiro, A., Vilaca, P. & Natal Jorge, R. M., Apr 2016, In : International Journal of Advanced Manufacturing Technology. 83, 9, p. 2129-2141 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Developments in micro-and nano-defects detection using bacterial cells

    Santos, T. G., Miranda, R. M., Teresa Vieira, M., Rita Farinha, A., Ferreira, T. J., Quintino, L., Santos Vilaca da Silva, P. & de Carvalho, C. C. C. R., Mar 2016, In : NDT & E INTERNATIONAL. 78, March, p. 20-28 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    A Microstructural Evaluation of Single and Double-Pass FSW Beads in 9% Nickel Steel

    Casanova, J., Lourenco Sorger, G., Santos Vilaca da Silva, P. & Brandi, S. D., 2016, Proceedings of the 69th International Conference of the International Institute of Welding: Melbourne, Australia. 14th to 15th July 2016. 4 p. Session 4C

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  33. Published

    Development of the Weldability by FSW of Cu-OFP Canisters: Design of FSW Tool and Modeling of FSW Tool

    Weaver, Q., Santos Vilaca da Silva, P. & Salonen, T., 2016, 13th Meeting SVETS Kommissionen AG 52 - FSW Processing: University West, Trollhättan, Sweden. 9th November, 2016..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  34. 2015
  35. Published

    Aalto University: Research and Education in Welded Structures

    Remes, H., Vilaca, P., Romanoff, J., Marquis, G. & Hänninen, H., 2015, In : Hitsaustekniikka. 2-3, p. 60-61

    Research output: Contribution to journalArticleProfessional

  36. Published

    Aalto-yliopiston opetus- ja tutkimustoiminta hitsaustekniikan eturintamassa

    Vilaça, P. & Hänninen, H., 2015, In : Hitsaustekniikka. 65, 1, p. 40-42

    Research output: Contribution to journalArticleProfessional

  37. Published

    Advanced Control of FSW of Ultra-HSSteels Based on the Monitoring of the Magnetic Permeability of the Processed Zone

    Vilaça, P. & Sorger, G., 2015, 12th Meeting SVETS Kommissionen AG 52 - FSW Processing, May 27, 2015, Oskarshamn, Sweden.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  38. Published

    A new dual driver planar eddy current probe with dynamically controlled induction pattern

    Rosado, L. S., Santos, T. G., Ramos, P. M., Vilaca, P. & Piedade, M., 2015, In : NDT & E INTERNATIONAL. 70, March, p. 29-37

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Can bacterial cells help the characterization of surface condition?

    Santos, T. G., Pamies-Teixeira, J., Miranda, R. M., Vilaça, P. & de Carvalho, C. C. C. R., 2015, ASME 2015 International Mechanical Engineering Congress & Exposition, November 13-19, 2015, Houston, Texas, USA. USA: ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    Characterisation of fatigue fracture surfaces of friction stir channelling specimens tested at different temperatures

    Vidal, C., Infante, V. & Vilaca, P., 2015, In : ENGINEERING FAILURE ANALYSIS. 56, 10, p. 204-215

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Corrosion Behavior of the Friction Stir Welded AZ31 Magnesium Alloy

    Nascimento, F., Fernandes, J. C. S., Vilaça, P. & Pires, F. M. A., 2015, In : MICROSCOPY AND MICROANALYSIS. 21, supplement S5, p. 33-34

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Eddy Current Testing of Unidirectional Carbon Fibre Reinforced Polymer Composites Using Advanced Probe

    Antin, K-N., Santos, T. G. & Vilaça, P., 2015, The 20th International Workshop on Electromagnetic Nondestructive Evaluation (ENDE2015), September 21-23, 2015, Sendai, Japan.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  43. Published

    Effect of Friction Stir welding tool direction, number of passes and post-weldin g heat treatment on the texture of 6063-T6 aluminum welded joint

    Poetscher, F., Brandi, S. D., Schon, C. G. & Vilaça, P., 2015, 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), April 15-17, 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Production by FSW of Free-Shape Hollow Profile in AA5754 for Automotive Application

    Taavitsainen, T., Vilaça, P. & Mutanen, T., 2015, IIW 2015 - 68th IIW Annual Assembly and International Conference, June 28 - July 3, 2015,Helsinki, Finland.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  45. Published

    Surface discontinuity detection using bacterial suspensions

    Santos, T. G., Miranda, R. M., Nascimento, F., Quintino, L., Vilaca, P. & de Carvalho, C. C. C. R., 2015, In : Welding in the World. 59, 5, p. 723-730

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Surface reinforcement of AA5083-H111 by friction stir processing assisted by electrical current

    Santos, T. G., Lopes, N., Machado, M., Vilaça, P. & Miranda, R. M., 2015, In : Journal of Materials Processing Technology. 216, 2, p. 375-380

    Research output: Contribution to journalArticleScientificpeer-review

  47. 2014
  48. Published

    Differences between secondary and primary flash formation on coating of HSS with AISI 316 using friction surfacing

    Vilaça, P., Hänninen, H., Saukkonen, T. & Miranda, R. M., Sep 2014, In : Welding in the World. 58, 5, p. 661-671 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    An Experimental Investigation of the Yield Parameters in Friction Surfacing Using Factorial Design of Experiment

    Chattopadhyaya, S., Mukhopadhyay, P. & Santos Vilaca da Silva, P., 2014, Proceedings of the International Conference on Advances in Manufacturing and Materials Engineering (ICAMME-2014). Surathkal, India. March 27-29, 2014.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    A Non-Conventional Technique for Evaluating Welded Joints Based on the Electrical Conductivity

    Santos, T. G., Sorger, G., Vilaça, P. & Miranda, R. M., 2014, In : Key Engineering Materials. 611-612, July, p. 671-676

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    Application of Friction Stir Welding and Allied Techniques to Aluminium

    Santos Vilaca da Silva, P., 2014.

    Research output: Contribution to conferencePaperProfessional

  52. Published

    Development of parameters for FSW of AZ31 Mg alloy with analysis of mechanical and corrosion properties

    Nascimento, F., Santos Vilaca da Silva, P., Pires, F. M. A., Fernandes, J. C. S. & Quintino, L., 2014, 67th Annual Assembly of the International Institute of Welding. Seoul, South Korea. 11-17 July, 2014. III-B-03-14

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. Published

    Effect of second pass in 2-sided FSW of high-strength structural steel

    Luumi, L., Santos Vilaca da Silva, P., Sato, Y. S., Hänninen, H. & Kokawa, H., 2014, 10th International Friction Stir Welding Symposium. Beijing, China. 20-22 May 2014.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Fatigue assessment of friction stir channels

    Vidal, C., Infante, V. & Vilaça, P., 2014, In : INTERNATIONAL JOURNAL OF FATIGUE. 62, p. 77-84

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Fatigue behaviour at elevated temperature of friction stir channelling solid plates of AA5083-H111 aluminium alloy

    Vidal, C., Infante, V. & Vilaça, P., 2014, In : INTERNATIONAL JOURNAL OF FATIGUE. 62, p. 85-92

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Friction Stir Welding and its Variants Applied to Metals

    Santos Vilaca da Silva, P., 2014.

    Research output: Contribution to conferencePaperProfessional

Previous 1 2 Next

ID: 107140