Pasquale Gallo

Ph.D.

  • Otakaari 4

20142020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Brittle Failure of Nanoscale Notched Silicon Cantilevers: A Finite Fracture Mechanics Approach

Gallo, P. & Sapora, A., 1 Mar 2020, In : APPLIED SCIENCES. 10, 5, 13 p., 1640.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
24 Downloads (Pure)

Fatigue strength modelling of high-performing welded joints

Remes, H., Gallo, P., Jelovica, J., Romanoff, J. & Lehto, P., Jun 2020, In : INTERNATIONAL JOURNAL OF FATIGUE. 135, 105555.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
66 Downloads (Pure)

Some Considerations on Stress Intensity Factor at Atomic Scale

Gallo, P., 1 Jan 2020, ICTAEM 2020 : Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics. SPRINGER , p. 319-324 6 p. (Structural Integrity; vol. 16).

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Open Access
File
3 Downloads (Pure)
2019

A strain–based fatigue life modelling of high-performing welded joints

Remes, H., Lehto, P., Gallo, P. & Romanoff, J., Oct 2019.

Research output: Contribution to conferenceAbstractScientificpeer-review

Experimental characterization at nanoscale of single crystal silicon fracture toughness

Gallo, P., Sumigawa, T. & Kitamura, T., 1 Jan 2019, In : Frattura e Integrita Strutturale. 13, 47, p. 408-415 8 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)
11 Downloads (Pure)

Generalized Formulation for Fatigue Assessment of Laser Stake-welded T-joints Varying Thicknesses and Loading Conditions

Gallo, P., Remes, H. & Romanoff, J., 2019, IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies. EDP SCIENCES, Vol. 269. 6 p. 03001. (MATEC web of conferences).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Open Access
File
100 Downloads (Pure)

Investigation into the breakdown of continuum fracture mechanics: synthesis of recent results on silicon

Gallo, P., Sumigawa, T., Shimada, T., Yan, Y. & Kitamura, T., 2019, Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics. Vol. 5. p. 205-210 6 p. (Structural Integrity book series; vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

4 Citations (Scopus)

On the Crack‐Tip Region Stress Field in Molecular Systems: The Case of Ideal Brittle Fracture

Gallo, P., 1 Oct 2019, In : Advanced theory and simulations. 2, 10, 7 p., 1900146.

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)
57 Downloads (Pure)

Strain energy density approach for brittle fracture from nano to macroscale and breakdown of continuum theory

Gallo, P., Hagiwara, Y., Shimada, T. & Kitamura, T., 4 Jul 2019, In : Theoretical and Applied Fracture Mechanics. 103, 7 p., 102300.

Research output: Contribution to journalArticleScientificpeer-review

File
8 Citations (Scopus)
84 Downloads (Pure)
2018

Influence of crack tip plasticity on fatigue behaviour of laser stake-welded T-joints made of thin plates

Gallo, P., Guglielmo, M., Romanoff, J. & Remes, H., 1 Feb 2018, In : International Journal of Mechanical Sciences. 136, p. 112-123 12 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
4 Citations (Scopus)
29 Downloads (Pure)

Numerical Evaluation of T-stress under Mixed Mode Loading Through the Use of Coarse Meshes

Acanfora, M., Gallo, P., Razavi, S. M. J., Ayatollahi, M. R. & Berto, F., 1 Mar 2018, In : Physical Mesomechanics. 21, 2, p. 124-134 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
85 Downloads (Pure)

Static assessment of nanoscale notched silicon beams using the averaged strain energy density method

Gallo, P., Sumigawa, T., Kitamura, T. & Berto, F., 2018, In : Theoretical and Applied Fracture Mechanics. 95, p. 261-269

Research output: Contribution to journalArticleScientificpeer-review

2017

Analysis of multiaxial low cycle fatigue of notched specimens for type 316L Stainless Steel under non-proportional loading

Gallo, P., Bressan, S., Morishita, T., Itoh, T. & Berto, F., 2017, In : Theoretical and Applied Fracture Mechanics. 89, p. 79-89 11 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
7 Citations (Scopus)
68 Downloads (Pure)

Creep behavior of v-notched components

Gallo, P., Razavi, S. M. J., Peron, M., Torgersen, J. & Berto, F., 2017, In : Frattura e Integrita Strutturale. 11, 41, p. 456-463 8 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
6 Citations (Scopus)
99 Downloads (Pure)

Fatigue behavior of innovative alloys at elevated temperature

Berto, F., Gallo, P., Razavi, S. M. J. & Ayatollahi, M. R., 2017, In : Procedia Structural Integrity. 3, p. 162-167 6 p.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
2 Citations (Scopus)
165 Downloads (Pure)

Fracture Behavior of Nanoscale Notched Silicon Beams Investigated by the Theory of Critical Distances

Gallo, P., Yan, Y., Sumigawa, T. & Kitamura, T., 18 Dec 2017, In : Advanced theory and simulations. 1, 1, 9 p., 1700006.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)
3 Downloads (Pure)

Influence of crack tip plasticity on the slope of fatigue curves for laser stake-welded T-joints loaded under tension and bending

Gallo, P., Remes, H. & Romanoff, J., 1 Jun 2017, In : INTERNATIONAL JOURNAL OF FATIGUE. 99, p. 125-136 12 p.

Research output: Contribution to journalArticleScientificpeer-review

File
8 Citations (Scopus)
6 Downloads (Pure)

Investigation of the fatigue behaviour of laser stake-welded t-joints

Gallo, P., Remes, H. & Romanoff, J., 2017.

Research output: Contribution to conferenceAbstractScientificpeer-review

Open Access
File
7 Downloads (Pure)

Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion

Aliha, M. R. M., Berto, F., Bahmani, A. & Gallo, P., 1 Apr 2017, In : Physical Mesomechanics. 20, 2, p. 149-156 8 p.

Research output: Contribution to journalArticleScientificpeer-review

File
28 Citations (Scopus)
5 Downloads (Pure)

Non-localized creep assessment of V-notched components: a review

Gallo, P., Berto, F., Razavi, S. M. J. & Ayatollahi, M. R., 2017, In : Procedia Structural Integrity. 3, p. 102-109 8 p.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
75 Downloads (Pure)

Numerical analysis of multiaxial low cycle fatigue of notched specimens made by stainless steel 316L under non-proportional loading

Bressan, S., Gallo, P., Morishita, T., Itoh, T. & Berto, F., 1 Jan 2017, p. 554-555. 2 p.

Research output: Contribution to conferencePaperScientificpeer-review

Open Access
File
1 Downloads (Pure)

Review of local strain energy density theory for the fracture assessment of V- notches under mixed mode loading

Ayatollahi, M. R., Berto, F., Campagnolo, A., Gallo, P. & Tang, K., 2017, In : Engineering Solid Mechanics. 5, 2, p. 113-132

Research output: Contribution to journalArticleScientificpeer-review

Synthesis of experimental testing and fatigue behavior of laser stake-welded T-joints on medium-high cycle fatigue range

Gallo, P., Romanoff, J., Karttunen, A., Frank, D. & Remes, H., 2017, In : Procedia Structural Integrity. 5, p. 809-816 8 p.

Research output: Contribution to journalConference articleScientificpeer-review

Open Access
File
1 Citation (Scopus)
133 Downloads (Pure)
2016

Advanced Materials for Applications at High Temperature: Fatigue Assessment by Means of Local Strain Energy Density

Gallo, P. & Berto, F., 2016, In : Advanced Engineering Materials. 18, p. 2010-2017

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

Analysis of creep stresses and strains around sharp and blunt V-notches

Gallo, P., Berto, F. & Glinka, G., 1 Oct 2016, In : Theoretical and Applied Fracture Mechanics. 85, p. 435-446 12 p.

Research output: Contribution to journalArticleScientificpeer-review

19 Citations (Scopus)

Evaluation of the strain energy density control volume for a nanoscale singular stress field

Gallo, P., Sumigawa, T., Kitamura, T. & Berto, F., 2016, In : Fatigue and Fracture of Engineering Materials and Structures. 39, 12, p. 1557-1564

Research output: Contribution to journalArticleScientificpeer-review

25 Citations (Scopus)

Experimental evaluation of rolling contact fatigue in railroad wheels

Sciammarella, C. A., Chen, R. J. S., Gallo, P., Berto, F. & Lamberti, L., 1 Oct 2016, In : INTERNATIONAL JOURNAL OF FATIGUE. 91, p. 158-170 13 p.

Research output: Contribution to journalArticleScientificpeer-review

19 Citations (Scopus)

Generalized approach to estimation of strains and stresses at blunt V-notches under non-localized creep

Gallo, P., Berto, F. & Glinka, G., 1 Mar 2016, In : Fatigue and Fracture of Engineering Materials and Structures. 39, 3, p. 292-306 15 p.

Research output: Contribution to journalArticleScientificpeer-review

46 Citations (Scopus)

V-Notched components under non-localized creeping condition: numerical evaluation of stresses and strains

Gallo, P., Berto, F. & Glinka, G., 2016, In : Procedia Structural Integrity. 2, p. 809-816

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
294 Downloads (Pure)
2015

Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results Under Different Loading Modes

Berto, F., Campagnolo, A. & Gallo, P., 7 Aug 2015, In : STRENGTH OF MATERIALS. 47, 3

Research output: Contribution to journalArticleScientificpeer-review

34 Citations (Scopus)

Extension of linear elastic strain energy density approach to high temperature fatigue and a synthesis of cu-be alloy experimental tests

Berto, F. & Gallo, P., 2015, In : Engineering Solid Mechanics. 3, 2, p. 111-116 6 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components

Gallo, P. & Berto, F., 1 Oct 2015, In : Frattura e Integrita Strutturale. 9, 34, p. 180-189 10 p.

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

High temperature fatigue tests of a Cu-Be alloy and synthesis in terms of linear elastic strain energy density

Berto, F., Gallo, P. & Lazzarin, P., 2015, In : Key Engineering Materials. 627, p. 77-80 4 p.

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

High temperature fatigue tests of notched specimens made of titanium Grade 2

Gallo, P., Berto, F. & Lazzarin, P., 1 Apr 2015, In : Theoretical and Applied Fracture Mechanics. 76, p. 27-34 8 p.

Research output: Contribution to journalArticleScientificpeer-review

42 Citations (Scopus)

Influence of surface roughness on high temperature fatigue strength and cracks initiation in 40CrMoV13.9 notched components

Gallo, P. & Berto, F., 1 Dec 2015, In : Theoretical and Applied Fracture Mechanics. 80, p. 226-234 9 p.

Research output: Contribution to journalArticleScientificpeer-review

24 Citations (Scopus)

Some Considerations on the J-Integral under Elastic-Plastic Conditions for Materials Obeying a Ramberg-Osgood Law

Gallo, P. & Berto, F., 1 Oct 2015, In : Physical Mesomechanics. 18, 4, p. 298-306 9 p.

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)
2014

High-temperature fatigue strength of a copper-cobalt-beryllium alloy

Berto, F., Lazzarin, P. & Gallo, P., 2014, In : Journal of Strain Analysis for Engineering Design. 49, 4, p. 244-256 13 p.

Research output: Contribution to journalArticleScientificpeer-review

41 Citations (Scopus)

High temperature fatigue tests of Cu-Be and 40CrMoV13.9 alloys

Gallo, P., Berto, F. & Lazzarin, P., 2014, Procedia Materials Science. Vol. 3. p. 27-32

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Open Access

High temperature fatigue tests of un-notched and notched specimens made of 40CrMoV13.9 steel

Berto, F., Gallo, P. & Lazzarin, P., 2014, In : Materials & design (1980-2015). 63, 1, p. 609-619 11 p.

Research output: Contribution to journalArticleScientificpeer-review

53 Citations (Scopus)