Ph.D. Pasquale Gallo

Postdoctoral Researcher

Research outputs

  1. 2019
  2. E-pub ahead of print

    On the Crack‐Tip Region Stress Field in Molecular Systems: The Case of Ideal Brittle Fracture

    Gallo, P., 26 Aug 2019, In : Advanced theory and simulations. 7 p., 1900146.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Strain energy density approach for brittle fracture from nano to macroscale and breakdown of continuum theory

    Gallo, P., Hagiwara, Y., Shimada, T. & Kitamura, T., 4 Jul 2019, In : Theoretical and Applied Fracture Mechanics. 103, 7 p., 102300.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Experimental characterization at nanoscale of single crystal silicon fracture toughness

    Gallo, P., Sumigawa, T. & Kitamura, T., 1 Jan 2019, In : Frattura e Integrita Strutturale. 13, 47, p. 408-415 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Generalized Formulation for Fatigue Assessment of Laser Stake-welded T-joints Varying Thicknesses and Loading Conditions

    Gallo, P., Remes, H. & Romanoff, J., 2019, IIW 2018 - International Conference on Advanced Welding and Smart Fabrication Technologies. Vol. 269. 6 p. 03001. (MATEC web of conferences).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. 2018
  7. Published

    Numerical Evaluation of T-stress under Mixed Mode Loading Through the Use of Coarse Meshes

    Acanfora, M., Gallo, P., Razavi, S. M. J., Ayatollahi, M. R. & Berto, F., 1 Mar 2018, In : Physical Mesomechanics. 21, 2, p. 124-134 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Influence of crack tip plasticity on fatigue behaviour of laser stake-welded T-joints made of thin plates

    Gallo, P., Guglielmo, M., Romanoff, J. & Remes, H., 1 Feb 2018, In : International Journal of Mechanical Sciences. 136, p. 112-123 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Fracture Behavior of Nanoscale Notched Silicon Beams Investigated by the Theory of Critical Distances

    Gallo, P., Yan, Y., Sumigawa, T. & Kitamura, T., Jan 2018, In : Advanced theory and simulations. 1, 1, 9 p., 1700006.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Investigation into the breakdown of continuum fracture mechanics: synthesis of recent results on silicon

    Gallo, P., Sumigawa, T., Shimada, T., Yan, Y. & Kitamura, T., 2018, Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics. Vol. 5. p. 205-210 (Structural Integrity book series; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Static assessment of nanoscale notched silicon beams using the averaged strain energy density method

    Gallo, P., Sumigawa, T., Kitamura, T. & Berto, F., 2018, In : Theoretical and Applied Fracture Mechanics. 95, p. 261-269

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2017
  13. Published

    Influence of crack tip plasticity on the slope of fatigue curves for laser stake-welded T-joints loaded under tension and bending

    Gallo, P., Remes, H. & Romanoff, J., 1 Jun 2017, In : INTERNATIONAL JOURNAL OF FATIGUE. 99, p. 125-136 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion

    Aliha, M. R. M., Berto, F., Bahmani, A. & Gallo, P., 1 Apr 2017, In : Physical Mesomechanics. 20, 2, p. 149-156 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Numerical analysis of multiaxial low cycle fatigue of notched specimens made by stainless steel 316L under non-proportional loading

    Bressan, S., Gallo, P., Morishita, T., Itoh, T. & Berto, F., 1 Jan 2017, p. 554-555. 2 p.

    Research output: Contribution to conferencePaperScientificpeer-review

  16. Published

    Analysis of multiaxial low cycle fatigue of notched specimens for type 316L Stainless Steel under non-proportional loading

    Gallo, P., Bressan, S., Morishita, T., Itoh, T. & Berto, F., 2017, In : Theoretical and Applied Fracture Mechanics. 89, p. 79-89 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Creep behavior of v-notched components

    Gallo, P., Razavi, S. M. J., Peron, M., Torgersen, J. & Berto, F., 2017, In : Frattura e Integrita Strutturale. 11, 41, p. 456-463 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Fatigue behavior of innovative alloys at elevated temperature

    Berto, F., Gallo, P., Razavi, S. M. J. & Ayatollahi, M. R., 2017, In : Procedia Structural Integrity. 3, p. 162-167 6 p.

    Research output: Contribution to journalConference articleScientificpeer-review

  19. Published

    Investigation of the fatigue behaviour of laser stake-welded t-joints

    Gallo, P., Remes, H. & Romanoff, J., 2017.

    Research output: Contribution to conferenceAbstractScientificpeer-review

  20. Published

    Non-localized creep assessment of V-notched components: a review

    Gallo, P., Berto, F., Razavi, S. M. J. & Ayatollahi, M. R., 2017, In : Procedia Structural Integrity. 3, p. 102-109 8 p.

    Research output: Contribution to journalConference articleScientificpeer-review

  21. Published

    Synthesis of experimental testing and fatigue behavior of laser stake-welded T-joints on medium-high cycle fatigue range

    Gallo, P., Romanoff, J., Karttunen, A., Frank, D. & Remes, H., 2017, In : Procedia Structural Integrity. 5, p. 809-816 8 p.

    Research output: Contribution to journalConference articleScientificpeer-review

  22. 2016
  23. Published

    Analysis of creep stresses and strains around sharp and blunt V-notches

    Gallo, P., Berto, F. & Glinka, G., 1 Oct 2016, In : Theoretical and Applied Fracture Mechanics. 85, p. 435-446 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Experimental evaluation of rolling contact fatigue in railroad wheels

    Sciammarella, C. A., Chen, R. J. S., Gallo, P., Berto, F. & Lamberti, L., 1 Oct 2016, In : INTERNATIONAL JOURNAL OF FATIGUE. 91, p. 158-170 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Generalized approach to estimation of strains and stresses at blunt V-notches under non-localized creep

    Gallo, P., Berto, F. & Glinka, G., 1 Mar 2016, In : Fatigue and Fracture of Engineering Materials and Structures. 39, 3, p. 292-306 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Advanced Materials for Applications at High Temperature: Fatigue Assessment by Means of Local Strain Energy Density

    Gallo, P. & Berto, F., 2016, In : Advanced Engineering Materials.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Evaluation of the strain energy density control volume for a nanoscale singular stress field

    Gallo, P., Sumigawa, T., Kitamura, T. & Berto, F., 2016, In : Fatigue and Fracture of Engineering Materials and Structures. 39, 12, p. 1557-1564

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    V-Notched components under non-localized creeping condition: numerical evaluation of stresses and strains

    Gallo, P., Berto, F. & Glinka, G., 2016, In : Procedia Structural Integrity. 2, p. 809-816

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2015
  30. Published

    Influence of surface roughness on high temperature fatigue strength and cracks initiation in 40CrMoV13.9 notched components

    Gallo, P. & Berto, F., 1 Dec 2015, In : Theoretical and Applied Fracture Mechanics. 80, p. 226-234 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components

    Gallo, P. & Berto, F., 1 Oct 2015, In : Frattura e Integrita Strutturale. 9, 34, p. 180-189 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Some Considerations on the J-Integral under Elastic-Plastic Conditions for Materials Obeying a Ramberg-Osgood Law

    Gallo, P. & Berto, F., 1 Oct 2015, In : Physical Mesomechanics. 18, 4, p. 298-306 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results Under Different Loading Modes

    Berto, F., Campagnolo, A. & Gallo, P., 7 Aug 2015, In : STRENGTH OF MATERIALS. 47, 3

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    High temperature fatigue tests of notched specimens made of titanium Grade 2

    Gallo, P., Berto, F. & Lazzarin, P., 1 Apr 2015, In : Theoretical and Applied Fracture Mechanics. 76, p. 27-34 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Extension of linear elastic strain energy density approach to high temperature fatigue and a synthesis of cu-be alloy experimental tests

    Berto, F. & Gallo, P., 2015, In : Engineering Solid Mechanics. 3, 2, p. 111-116 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    High temperature fatigue tests of a Cu-Be alloy and synthesis in terms of linear elastic strain energy density

    Berto, F., Gallo, P. & Lazzarin, P., 2015, In : Key Engineering Materials. 627, p. 77-80 4 p.

    Research output: Contribution to journalArticleScientificpeer-review

  37. 2014
  38. Published

    High-temperature fatigue strength of a copper-cobalt-beryllium alloy

    Berto, F., Lazzarin, P. & Gallo, P., 2014, In : Journal of Strain Analysis for Engineering Design. 49, 4, p. 244-256 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    High temperature fatigue tests of Cu-Be and 40CrMoV13.9 alloys

    Gallo, P., Berto, F. & Lazzarin, P., 2014, Procedia Materials Science. Vol. 3. p. 27-32

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    High temperature fatigue tests of un-notched and notched specimens made of 40CrMoV13.9 steel

    Berto, F., Gallo, P. & Lazzarin, P., 2014, In : Materials & design (1980-2015). 63, 1, p. 609-619 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 2170203