Olli Dahl

Professor

  • Vuorimiehentie 1,02150,Espoo

19982020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
1998

Massan valmistuksen viimeisimmät kehitystrendit

Dahl, O., Fiskari, J. & Niinimäki, J., 1998, In : Paperi ja Puu. 80, 2, p. 90-92

Research output: Contribution to journalArticleScientificpeer-review

2003

Behavior of certain components in the vacuum drum washer after the first D stage in ECF bleaching

Sillanpää, M., Sankari, M., Dahl, O. & Ala-Kaila, K., 2003, In : TAPPI Journal. 2, 9, p. 18-21

Research output: Contribution to journalArticleScientificpeer-review

Real Wash Loss Compounds In Peroxide Bleaching of Softwood Kraft Pulp

Sillanpää, M., Sankari, M., Dahl, O. & Ala-Kaila, K., 2003, In : APPITA Journal. 56, 5, p. 397-400

Research output: Contribution to journalArticleScientificpeer-review

2004

Effects of some specific organic wash loss compounds on the oxygen delignification response of softwood kraft pulp

Dahl, O., Sankari, M., Ala-Kaila, K., Sillanpää, M. & Perämäki, P., 2004, In : APPITA Journal. 57, 3, p. 228-233

Research output: Contribution to journalArticleScientificpeer-review

Real wash loss compounds in oxygen delignification of softwood kraft pulp

Dahl, O., Sankari, M., Ala-Kaila, K. & Perämäki, P., 2004, In : Nordic Pulp and Paper Research Journal. 19, 2, p. 264-270

Research output: Contribution to journalArticleScientificpeer-review

Use of Secondary Condensates from Black Liquor Evaporation as Process Water in Do Bleaching

Dahl, O., Sankari, M., Sillanpää, M. & Ala-Kaila, K., 2004, In : PPC. 105, 5, p. pp. T113-T117

Research output: Contribution to journalArticleScientificpeer-review

2006

Environmental implications of aggregation phenomena: current understanding

Maximova, N. & Dahl, O., 2006, In : Current Opinion in Colloid and Interface Science. 11, 4, p. 246-266

Research output: Contribution to journalArticleScientificpeer-review

85 Citations (Scopus)

Leaching of chlorine compounds and metallic elements after the first chlorine dioxide bleaching

Dahl, O., Sillanpää, M. K. & Ala-Kaila, K., 2006, In : Paperi ja Puu - Paper and Timber. 88, 1, p. 46-50

Research output: Contribution to journalArticleScientificpeer-review

2007

A set up of a modern analytical laboratory for wastewaters from pulp and paper industry

Maximova, N. & Dahl, O., 2007, In : CHEMICAL SOCIETY REVIEWS. 36, p. 1323-1349

Research output: Contribution to journalArticleScientificpeer-review

23 Citations (Scopus)

Concentrations of nutrients and heavy metals in cyclone fly ash from the grate-fired boiler at a small municipal district heating plant (6 MW).

Poykio, R., Nurmesniemi, H. & Dahl, O., 2007, In : JOURNAL OF RESIDUALS SCIENCE AND TECHNOLOGY. 4, 3, p. 127-136

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Organically bound chlorine in ECF bleaching: focus on the pulp bound fraction (OCl)

Martikka, M., Dahl, O., Vuorinen, T., Pikka, O., Tervola, P. & Vehmaa, J., 2007, In : O Papel. 68, 9, p. 56-66

Research output: Contribution to journalArticleScientificpeer-review

2008

Concentrations of heavy metals in fly ash from a coal-fired power plant with respect to the new finnish limit values

Dahl, O., Poykio, R. & Nurmesniemi, H., 2008, In : JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT. 10, 1, p. 87-92

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

Refractive index measurements for brown stock washing loss - laboratory investigations

Kopra, R., Tirri, T. & Dahl, O., 2008, In : APPITA Journal. 61, 5, p. 408-412

Research output: Contribution to journalArticleScientificpeer-review

17 Citations (Scopus)

Sequential extraction partitioning of heavy metals, sulphur and phosphorus in bottom ash from a coal-fired power plant

Dahl, O., Nurmesniemi, H. & Pöykiö, R., 2008, In : International Journal of Environmental Analytical Chemistry. 88, 1, p. 61

Research output: Contribution to journalArticleScientificpeer-review

2009
97 Citations (Scopus)

Effect of raw wood supply system on the wood paying capability of a kraft pulp mill using Scots pine

Dahl, O., Jylhä, P., Laitila, J. & Kärhä, K., 2009, In : Finbio. 44, p. 371-379

Research output: Contribution to journalArticleScientificpeer-review

2010

Comparison of the Fertilizer Properties of Bottom Ash and Fly Ash from the 120 MW Power Plant of a Fluting Board Mill Incinerating Different Fuel Mixtures

Manskinen, K., Nurmesniemi, H., Pöykiö, R. & Dahl, O., 2010, In : JOURNAL OF INTERNATIONAL ENVIRONMENTAL APPLICATION AND SCIENCE. 5, 4, p. 526-537

Research output: Contribution to journalArticleScientificpeer-review

Earth Construction and Landfill Disposal Options for Slaker Grits

Watkins, G., Pöykiö, R., Nurmesniemi, H. & Dahl, O., 2010, In : RESEARCH JOURNAL OF APPLIED SCIENCE, ENGINEERING AND TECHNOLOGY. 2, 8, p. 757-764

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Heavy metal concentrations in bottom ash and fly ash fractions from a large-sized (246 MW) fluidized bed boiler with respect to their Finnish forest fertilizer limit values

Dahl, O., Nurmesniemi, H., Pöykiö, R. & Watkins, G., 2010, In : Fuel Processing Technology. 91, 11, p. 1634-1639

Research output: Contribution to journalArticleScientificpeer-review

52 Citations (Scopus)

Innovative use potential of industrial residues from the steel, paper and pulp industries a preliminary study

Watkins, G., Mäkelä, M. & Dahl, O., 2010, In : PROGRESS IN INDUSTRIAL ECOLOGY: AN INTERNATIONAL JOURNAL. 7, 3, p. 185-204

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Integration of Solid Residues from the Steel and Pulp and Paper Industries for Forest Soil Amendment

Mäkelä, M., Watkins, G., Dahl, O., Nurmesniemi, H. & Pöykiö, R., 2010, In : JOURNAL OF RESIDUALS SCIENCE AND TECHNOLOGY. 7, 4, p. 191-198

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Refractive index measurements for brown stock washing loss - mill investigations

Kopra, R., Helttunen, J., Tervola, P., Tirri, T. & Dahl, O., 2010, In : APPITA Journal. 63, 2, p. 131-136

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Slaker grits from the causticising process of a pulp mill - a potential fertiliser and liming agent material for use in agriculture and forestry

Nurmesniemi, H., Dahl, O., Watkins, G. & Pöykiö, R., 2010, In : International Journal of Materials Engineering Innovation. 1, 3/4, p. 312-324

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

The effect of supply system on the wood paying capability of a kraft pulp mill using Scots pine harvested from first thinnings

Jylhä, P., Dahl, O., Laitila, J. & Kärhä, K., 2010, In : Silva Fennica. 44, 4, p. 695714

Research output: Contribution to journalArticleScientificpeer-review

23 Citations (Scopus)
15 Citations (Scopus)
2011
6 Citations (Scopus)

Chlorate reduction in kraft pulp mill wastewater treatment processes

Toivakainen, S., Laukkanen, T., Jokinen, H. & Dahl, O., 2011, In : APPITA Journal. 64, 3, p. 262-266

Research output: Contribution to journalArticleScientificpeer-review

Comparison of fertilizer properties of ash fractions from medium-sized (32 MW) and small-sized (6 MW) municipal district heating plants

Nurmesniemi, H., Mäkelä, M., Pöykiö, R. & Dahl, O., 2011, In : INTERNATIONAL JOURNAL OF ENGINEERING AND APPLIED SCIENCES. 7, 2, p. 87-91

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Comparison of trace elements in bottom ash and fly ash from a large-sized (77 MW) multi-fuel boiler at the power plant of a fluting board mill, Finland

Pöykiö, R., Manskinen, K., Nurmesniemi, H. & Dahl, O., 2011, In : ENERGY EXPLORATION AND EXPLOITATION. 29, 3, p. 217-233

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Optimisation of pressure filter performance using refractometer measurements - Mill investigations

Kopra, R., Karjalainen, S., Tirri, T. & Dahl, O., 2011, In : APPITA Journal. 64, 1, p. 49-

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Optimization of pressure filter performance using refractometer - Mill investigations

Kopra, R., Karjalainen, S., Tirri, T. & Dahl, O., 2011, In : APPITA Journal. 64, 1, p. 49-54

Research output: Contribution to journalArticleScientificpeer-review

Optimization of wash water usage in brown stock washing

Kopra, R., Kari, E., Harinen, M., Tirri, T. & Dahl, O., 2011, In : TAPPI Journal. 10, 9, p. 27-33

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Preliminary evaluation of fly ash and lime for use as supplementary cementing materials in cold-agglomerated blast furnace briquetting

Mäkelä, M., Paananen, T., Kokkonen, T., Makkonen, H., Heino, J. & Dahl, O., 2011, In : ISIJ International. 51, 5, p. 776-781

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Release of Elements in Bottom Ash and Fly Ash from Incineration of Peat- and Wood-Residues using a Sequential Extraction Procedure

Pöykiö, R., Manskinen, K., Dahl, O., Mäkelä, M. & Nurmesniemi, H., 2011, In : World Academy of Science, Engineering and Technology. 60, p. 1417-1421

Research output: Contribution to journalArticleScientificpeer-review

Soveltuuko rinnakkaissaostus selluteollisuuden jätevesille?

Toivakainen, S., Laukkanen, T. & Dahl, O., 2011, In : VESITALOUS. LII, 3, p. 17-20

Research output: Contribution to journalArticleProfessional

Total and extractable element concentrations in bed sand material from a medium-sized (32 MW) municipal district heating plant incinerating peat, stumps, sawdust and recycled wood

Watkins, G., Pöykiö, R., Nurmesniemi, H., Dahl, O. & Mäkelä, M., 2011, In : Fuel Processing Technology. 92, 6, p. 1195-1202

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)
2012

An activity-based cost calculation for kraft pulp mill

Korpunen, H., Virtanen, P., Dahl, O., Jylhä, P. & Uusitalo, J., 2012, In : TAPPI Journal. 11, 9, p. 19-27

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Comparison of the forest fertilizer properties of ash fractions from two power plants of pulp and paper mills incinerating biomass-based fuels

Nurmesniemi, H., Mäkelä, M., Pöykiö, R., Manskinen, K. & Dahl, O., 2012, In : Fuel Processing Technology. 104, p. 1-6

Research output: Contribution to journalArticleScientificpeer-review

50 Citations (Scopus)

Feasibility assessment of inter-industry solid residue utilization for soil amendment - Trace element availability and legislative issues

Mäkelä, M., Harju-Oksanen, M-L., Watkins, G., Ekroos, A. & Dahl, O., 2012, In : RESOURCES CONSERVATION AND RECYCLING. 67, p. 1-8

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Forest fertilizer properties of the bottom ash and fly ash from a large-sized (115 MW) industrial power plant incineration wood-based biomass residues.

Nurmesniemi, H., Manskinen, K., Pöykiö, R. & Dahl, O., 2012, In : JOURNAL OF THE UNIVERSITY OF CHEMICAL TECHNOLOGY AND METALLURGY. 47, 1, p. 43-52

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Heavy metals in wet scrubber residue from a medium-sized (32 MW) municipal district heating plant incinerating wood and peat in a fluidized bed boiler

Pöykiö, R., Nurmesniemi, H. & Dahl, O., 2012, In : INTERNATIONAL JOURNAL OF ENVIRONMENT AND WASTE MANAGEMENT. 10, 4, p. 377-390

Research output: Contribution to journalArticleScientificpeer-review

Improving brown stock washing by on-line measurement - Mill investigations

Kopra, R., Kari, E., Harinen, M., Tirri, T. & Dahl, O., 1 Jan 2012, In : O Papel. 73, 1, p. 51-57 7 p.

Research output: Contribution to journalArticleProfessional

3 Citations (Scopus)

Improving brown stock washing by using on-line measurement mill investigations

Kopra, R., Kari, E., Harinen, M., Tirri, T. & Dahl, O., 2012, In : O Papel. 73, 1, p. 79-85

Research output: Contribution to journalArticleScientificpeer-review

Influence of fly ash and ground granulated blast furnace slag on the mechanical properties and reduction behavior of cold-agglomerated blast furnace briquettes

Mäkelä, M., Paananen, T., Heino, J., Kokkonen, T., Huttunen, S., Makkonen, H. & Dahl, O., 2012, In : ISIJ International. 52, 6, p. 1101-1108

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)

Utilization of steel, pulp and paper industry solid residues in forest soil amendment: Relevant physicochemical properties and heavy metal availability

Makela, M., Watkins, G., Poykio, R., Nurmesniemi, H. & Dahl, O., 2012, In : JOURNAL OF HAZARDOUS MATERIALS. 207, 208, p. 21-27

Research output: Contribution to journalArticleScientificpeer-review

40 Citations (Scopus)
2013

Application of the BRC Sequential Extraction Scheme for Assessing the Leaching of Elements in Wood-Based Ash Fractions from a Large-Sized (115 MW) Industrial Power Plant of a Pulp and Board Mill

Pöykiö, R., Mäkelä, M., Nurmesniemi, H., Dahl, O. & Oguchi, M., 2013, In : Waste and Biomass Valorization. 4, 4, p. 821-830

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Drying/Fractionation of Deinking Sludge with a High-Velocity Cyclone

Lahdeniemi, A., Makela, M. & Dahl, O., 2013, In : Drying Technology. 31, 4, p. 378-384

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Evaluation of trace element availability from secondary metallurgical slag generated in steelmaking by sequential chemical extraction

Makela, M., Valimaki, I., Pöykiö, R., Nurmesniemi, H. & Dahl, O., 2013, In : INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY. 10, 6, p. 1193-1208

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)