Mika Salmi

Staff Scientist

Research outputs

  1. 2019
  2. Published

    Effect of process parameters on non-modulated Ni-Mn-Ga alloy manufactured using powder bed fusion

    Nilsén, F., Flores Ituarte, I., Salmi, M., Partanen, J. & Hannula, S-P., 1 Aug 2019, In : Additive Manufacturing. 28, p. 464-474 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Three-dimensional printed surgical templates for fresh cadaveric osteochondral allograft surgery with dimension verification by multivariate computed tomography analysis

    Huotilainen, E., Salmi, M. & Lindahl, J., 1 Aug 2019, In : KNEE. 26, 4, p. 923-932 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published

    Main Clinical Use of Additive Manufacturing (Three-Dimensional Printing) in Finland Restricted to the Head and Neck Area in 2016–2017

    Pettersson, A. B. V., Salmi, M., Vallittu, P., Serlo, W., Tuomi, J. & Mäkitie, A. A., 25 Feb 2019, In : SCANDINAVIAN JOURNAL OF SURGERY.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    OPENGLOT – An open environment for the evaluation of glottal inverse filtering

    Alku, P., Murtola, T., Malinen, J., Kuortti, J., Story, B., Airaksinen, M., Salmi, M., Vilkman, E. & Geneid, A., 1 Feb 2019, In : Speech Communication. 107, p. 38-47 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  6. 2018
  7. Published

    The perceived value of additively manufactured digital spare parts in industry: An empirical investigation

    Chekurov, S., Metsä-Kortelainen, S., Salmi, M., Roda, I. & Jussila, A., Nov 2018, In : International Journal of Production Economics. 205, p. 87-94 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Evaluating the Readiness Level of Additively Manufactured Digital Spare Parts: An Industrial Perspective

    Kretzschmar, N., Chekurov, S., Salmi, M. & Tuomi, J., 7 Oct 2018, In : APPLIED SCIENCES. 8, 10, 1837.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Implementation of Industrial Additive Manufacturing: Intelligent Implants and Drug Delivery Systems

    Akmal, J. S., Salmi, M., Mäkitie, A., Björkstrand, R. & Partanen, J., 29 Jun 2018, In : JOURNAL OF FUNCTIONAL BIOMATERIALS. 9, 3, 14 p., 41.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Workflow for 3D printing of medical models – phases, timeline and costs

    Salmi, M., Flores Ituarte, I., Tuomi, J. & Mäkitie, A., Jun 2018, In : Le Courrier de la Transplantation . 18, 1-2

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Digitaaliset varaosat

    Salmi, M., Partanen, J., Tuomi, J., Chekurov, S., Björkstrand, R., Huotilainen, E., Kukko, K., Kretzschmar, N., Akmal, J., Jalava, K. & 9 othersKoivisto, S., Vartiainen, M., Metsä-Kortelainen, S., Puukko, P., Jussila, A., Riipinen, T., Reijonen, J., Tanner, H. & Mikkola, M., 2018, Aalto University, 64 p.

    Research output: Working paperScientific

  12. Published

    Digital Spare Parts

    Salmi, M., Partanen, J., Tuomi, J., Chekurov, S., Björkstrand, R., Huotilainen, E., Kukko, K., Kretzschmar, N., Akmal, J., Jalava, K. & 9 othersKoivisto, S., Vartiainen, M., Metsä-Kortelainen, S., Puukko, P., Jussila, A., Riipinen, T., Reijonen, J., Tanner, H. & Mikkola, M., 2018, Aalto University, 67 p.

    Research output: Working paperProfessional

  13. Published

    MULTI-SCALE TOPOLOGICALLY OPTIMIZED COMPONENTS MADE BY CASTING AND ADDITIVE MANUFACTURING

    Jalava, K., Salmi, M., Kukko, K. & Orkas, J., 2018, 73rd World Foundry Congress, Congress Proceedings. p. 141-142 2 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Towards space-grade 3D-printed, ALD-coated small satellite propulsion components for fluidics

    Kestilä, A., Nordling, K., Miikkulainen, V., Kaipio, M., Tikka, T., Salmi, M., Auer, A., Leskelä, M. & Ritala, M., 2018, In : Additive Manufacturing. 22, p. 31-37 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. 2017
  16. Published

    Current and Future Business Models for 3D Printing Applications

    Flores Ituarte, I., Haghighat Khajavi, S. & Salmi, M., 10 Oct 2017, 3D Printing, Intellectual Property and Innovation: Insights from Law and Technology. Ballardini, R. M., Norrgård, M. & Partanen, J. (eds.). p. 33-62

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  17. Published

    Law and Technology of 3D Printing and Medical Devices

    Cadillo Chandler, D. & Salmi, M., 10 Oct 2017, 3D Printing, Intellectual Property and Innovation: Insights from Law and Technology. Ballardini, R. M., Norrgård, M. & Partanen, J. (eds.). p. 149-168

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  18. Published

    Anatomically personalized and mobilizing external support and method for controlling a path of an external auxiliary frame

    Lindahl, J. E., Salo, J., Tuomi, J., Björkstrand, R., Salmi, M., Huotilainen, E. & Roiha, M., 22 Aug 2017, Patent No. US9737336 B2, 23 Dec 2014, Priority date 23 Apr 2014, Priority No. US 2015/0112339 A1

    Research output: PatentScientific

  19. Published

    Additive Manufacturing in Finland: Recommendations for a Renewed Innovation Policy

    Flores Ituarte, I., Salmi, M., Ballardini, R. M., Tuomi, J. & Partanen, J., 2017, Proceedings of the 16th Nordic Laser Materials Processing Conference, NOLAMP16. Kristiansen, M. & Villumsen, S. L. (eds.). Elsevier, Vol. 89. p. 70-79 (Physics Procedia).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Additive Manufacturing in Offsite Repair of Consumer Electronics

    Chekurov, S. & Salmi, M., 2017, Proceedings of the 16th Nordic Laser Materials Processing Conference, NOLAMP16. Kristiansen, M. & Villumsen, S. L. (eds.). Elsevier, Vol. 89. p. 23-30 8 p. (Physics Procedia).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    In vitro cytotoxicity and surface topography evaluation of additive manufacturing titanium implant materials

    Tuomi, J., Björkstrand, R., Pernu, M., Salmi, M., Huotilainen, E., Wolff, J., Vallittu, P. & Mäkitie, A., 2017, In : Journal of Materials Science: Materials in Medicine. 28, 3, 7 p., 53.

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    The ultrasonic burnishing of cobalt-chrome and stainless steel surface made by additive manufacturing

    Salmi, M., Huuki, J. & Flores Ituarte, I., 2017, In : Progress in Additive Manufacturing. 2, 1-2, p. 31-41 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. 2016
  24. Published

    Three-dimensional printing for restoration of the donor face: A new digital technique tested and used in the first facial allotransplantation patient in Finland

    Mäkitie, A. A., Salmi, M., Lindford, A., Tuomi, J. & Lassus, P., 1 Dec 2016, In : JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY. 69, 12, p. 1648-1652 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Possibilities of preoperative medical models made by 3D printing or additive manufacturing

    Salmi, M., 7 Jun 2016, In : JOURNAL OF MEDICAL ENGINEERING. 2016, p. 1-6 6 p., 6191526.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    3D printing and applications: Academic research through case studies in Finland

    Flores Ituarte, I., Huotilainen, E., Mohite, A., Chekurov, S., Salmi, M., Helle, J., Wang, M., Kukko, K., Björkstrand, R., Tuomi, J. & 1 othersPartanen, J., 2016, NordDesign 2016 - Engineering Design society. The Design Society, Vol. 2. p. 32-41

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published
  28. 2015
  29. Published

    3D Printing or Additive Manufacturing (AM) in the industrial context: promoting competitiveness: 3D Printing for Industrial Innovation

    Flores Ituarte, I., Salmi, M., Partanen, J. & Tuomi, J., 2015.

    Research output: Working paperDiscussion paperProfessional

  30. Published

    3D printing policies and legislation to attract business to Finland

    Ballardini, R. M., Salmi, M. & Norrgård, M., 2015, In : IPRinfo. 2, p. online

    Research output: Contribution to journalArticleProfessional

  31. Published

    Additive Manufacturing in Production: A Study Case Applying Technical Requirements

    Flores, I., Coatanea, E., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : Physics Procedia. 78, p. 357-366 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Post-processing opportunities of professional and consumer grade 3D printing equipment: a comparative study

    Flores, I., Chekurov, S., Salmi, M., Tuomi, J. & Partanen, J., 2015, In : INTERNATIONAL JOURNAL OF RAPID MANUFACTURING. 5, 1, p. 58-75

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Tekes projekti SuperMachines loppuraportti

    Salmi, M., Partanen, J., Tuomi, J., Chekurov, S., Flores, I., Björkstrand, R. & Lehtinen, P., 2015, Espoo, (Aalto-yliopiston Insinööritieteiden korkeakoulun julkaisuja).

    Research output: Working paperProfessional

  34. Published

    The Effect of Local Heating by Laser Irradiation for Aluminum, Deep Drawing Steel and Copper Sheets in Incremental Sheet Forming

    Lehtinen, P., Väisänen, T. & Salmi, M., 2015, In : Physics Procedia. 78, p. 312-319

    Research output: Contribution to journalArticleScientificpeer-review

  35. 2014
  36. Published

    A novel classification and online platform for planning and documentation of medical applications of additive manufacturing.

    Tuomi, J., Paloheimo, K-S., Vehviläinen, J., Björkstrand, R., Salmi, M., Huotilainen, E., Kontio, R., Rouse, S., Gibson, I. & Mäkitie, A., 2014, In : SURGICAL INNOVATION. 21, 6, p. 553-559

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Imaging requirements for medical applications of additive manufacturing

    Huotilainen, E., Paloheimo, M., Salmi, M., Paloheimo, K-S., Björkstrand, R., Tuomi, J., Markkola, A. & Mäkitie, A., 2014, In : Acta Radiologica. 55, 1, p. 78-85

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Inaccuracies in additive manufactured medical skull models caused by the DICOM to STL conversion process

    Huotilainen, E., Jaanimets, R., Valásek, J., Marcián, P., Salmi, M., Tuomi, J., Mäkitie, A. & Wolff, J., 2014, In : Journal of Cranio-Maxillofacial Surgery. 42, 5, p. pp. e259-e265

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Robust Design Principles to Evaluate Additive Manufacturing Capabilities

    Flores, I., Coatanea, E., Salmi, M. & Tuomi, J., 2014, International Symposium on Robust Design, Copenhagen, 14-15.8.2014. p. 135-145

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. 2013
  41. Published

    Accuracy of medical models made by additive manufacturing (rapid manufacturing)

    Salmi, M., Paloheimo, K-S., Tuomi, J., Wolff, J. & Mäkitie, A., 2013, In : Journal of Cranio-Maxillofacial Surgery. 41, 7, p. 603-609

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    A digital process for additive manufacturing of occlusal splints: a clinical pilot study

    Salmi, M., Paloheimo, K-S., Tuomi, J., Ingman, T. & Makitie, A., 2013, In : Journal of the Royal Society Interface. 10, 84, p. 130203

    Research output: Contribution to journalArticleScientificpeer-review

  43. Published

    Medical applications of additive manufacturing in surgery and dental care

    Salmi, M., 2013, Aalto University. 98 p.

    Research output: ThesisDoctoral ThesisCollection of Articles

  44. Published

    Novel additive manufactured scaffolds for tissue engineered trachea research

    Mäkitie, A. A., Korpela, J., Elomaa, L., Reivonen, M., Kokkari, A., Malin, M., Korhonen, H., Wang, X., Salo, J., Sihvo, E. & 6 othersSalmi, M., Partanen, J., Paloheimo, K-S., Tuomi, J., Närhi, T. & Seppälä, J., 2013, In : Acta Oto-laryngologica. 133, 4, p. 412-417 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. 2012
  46. Published

    Designing and Additive Manufacturing A Prototype for A Novel Instrument for Mandible Fracture Reduction

    Kontio, R., Björkstrand, R., Salmi, M., Paloheimo, M., Paloheimo, K-S., Tuomi, J. & Mäkitie, A., 2012, In : SURGERY: CURRENT RESEARCH. S:1

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Patient specific reconstruction with 3D modeling and DMLS additive manufacturing

    Salmi, M., Tuomi, J., Paloheimo, K-S., Björkstrand, R., Paloheimo, M., Salo, J., Kontio, R., Mesimäki, K. & Mäkitie, A., 2012, In : Rapid Prototyping Journal. 18, 3, p. 209-214

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Rapid Tooling Method for Soft Customized Removable Oral Appliances

    Salmi, M., Tuomi, J., Sirkkanen, R., Ingman, T. & Mäkitie, A., 2012, In : THE OPEN DENTISTRY JOURNAL. 6, p. 85-89

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Web Platform for Collaboration and Medical Case Documentation

    Vehviläinen, J., Tuomi, J., Paloheimo, K-S., Björkstrand, R., Salmi, M., Huotilainen, E., Gibson, I. & Mäkitie, A., 2012, iCAT 2012, 4th International Conference on Additive Technologies, DAAAM Specialized conference, 19-21 September, 2012, Maribor, Slovenia.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. 2011
  51. Published

    Considerations on the Laryngotracheal Reconstruction and Tissue Engineering

    Reivonen, M., Salmi, M., Huotilainen, E., Wang, X., Paloheimo, M., Paloheimo, KS., Tuomi, J. & Mäkitie, AA., 2011, China and Finland Workshop on Biomanufacturing and Evaluation Techniques, CFWBET-2011. Institute of Biomedical Engineering, Chinese Academy of Medical Science, The Key Laboratory of Biomedical Materia. p. 200-203

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  52. Published

    Considerations on the Requirements for Additive Manufacturing Related Medical Imaging

    Huotilainen, E., Paloheimo, M., Salmi, M., Paloheimo, K-S., Tuomi, J. & Mäkitie, A., 2011, China and Finland Workshop on Biomanufacturing and Evaluation Techniques, CFWBET-2011. Institute of Biomedical Engineering, Chinese Academy of Medical Science, The Key Laboratory of Biomedical Materia. p. 105-108

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  53. 2010
  54. Published

    Digital design and rapid manufacturing in orbital wall reconstruction

    Salmi, M., Tuomi, J., Paloheimo, K-S., Paloheimo, M., Björkstrand, R., Mäkitie, A. A., Mesimäki, K. & Kontio, R., 2010, 4rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria Portugal, 6th to 10th October 2009. Bártolo et al., P. J. (ed.). p. 339-342 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Medical applications of rapid prototyping - From applications to classification

    Tuomi, J., Paloheimo, K-S., Björkstrand, R., Salmi, M., Paloheimo, M. & Mäkitie, A., 2010, Innovative Developments in Design and Manufacturing.Advanced Research in Virtual and Rapid Prototyping - Proceedings of VR"P4, Leiria, Portugal, October 2009. Bártolo, P. J. E. A. (ed.). London, p. 701-704 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Silmäkuopan seinämän korjaus pikavalmistetulla istutteella

    Kontio, R., Mesimäki, K., Mäkitie, A., Paloheimo, M., Paloheimo, K-S., Björkstrand, R., Tuomi, J. & Salmi, M., 2010, In : Suomen Lääkärilehti. 65, 6, p. 491-496

    Research output: Contribution to journalReview ArticleScientificpeer-review

  57. Published

    Teollisen pikavalmistuksen lääketieteelliset sovellukset

    Mäkitie, A., Paloheimo, K-S., Björkstrand, R., Salmi, M., Kontio, R., Salo, J., Yan, Y., Paloheimo, M. & Tuomi, J., 2010, In : Duodecim: Lääketieteellinen aikakauskirja. 126, 2, p. 143-151 9 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  58. Published

    Teollisen pikavalmistuksen lääketieteelliset sovellutukset

    Mäkitie, A., Paloheimo, K-S., Björkstrand, R., Salmi, M., Kontio, R., Salo, J. Y. & Paloheimo, M., 2010, In : Duodecim. 126, p. 143-151

    Research output: Contribution to journalArticleScientificpeer-review

ID: 82375