Matti Pietola

Professor

Research outputs

  1. 2007
  2. Published

    Dynamical performance of a fast magnetorheological (MR) valve

    Kostamo, J., Kostamo, E., Kajaste, J. & Pietola, M., 2007, 20th Bath / ASME Symposium on Fluid Power & Motion Control PTMC 2007, Bath UK, 12-14 September, 2007. University of Bath, p. 339-412

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Effects of temperature on proportional valve dynamics and reliability

    Hänninen, H., Kauranne, H. & Pietola, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, SICFP'07, Tampere, Finland, May 21-23, 2007. p. 13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  4. Published

    Experimental Study of Sealing Capability of Large Diameter Rotary Face Seals for Fluid Power Applications in Process Industry

    Calonius, O., Hänninen, H. & Pietola, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, SICFP'07, Tampere, Finland, May 21 - 23, 2007. p. 16

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  5. Published

    Generating Vibration with Artificial Muscles

    Keski-Honkola, P. & Pietola, M., 2007, The 10th Scandinavian International Conference on Fluid Power, SICFP'07, Tampere, Finland, May 21-23, 2007. p. 261-273

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  6. Published

    Hydraulic motion amplifier with composite for piezo actuator

    Kajaste, J., Aho, H., Brace, W., Niemi, M., Jalová, M., Jalový, M., Andrlik, V. & Pietola, M., 2007, Smart Systems 2007, Seinäjoki, Finland, June 6-7, 2007. p. 9

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Transient pressure control in digital hydraulic systems

    Juhala, J., Kajaste, J. & Pietola, M., 2007, The Tenth Scandinavian International Conference on Fluid Power, SICFP'07, Tampere, Finland, May 21-23, 2007. p. 9

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. 2006
  9. Published

    Computational models for effective bulk modulus of hydraulic fluid

    Kajaste, J., Kauranne, H., Ellman, A. & Pietola, M., 2006, The 2nd International Conference on Computational Methods in Fluid Power, FPNI'06, Aalborg, Denmark, August 2-3, 2006. p. 7

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  10. Published

    Finite Element Analysis of Revised Face Seal Design for Process Machinery

    Calonius, O. & Pietola, M., 2006, AED2006-5th International Conference on Advanced Engineering Design, Prague, Czech Republic, 11-14 June 2006. p. 8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Performance of magnetic shape memory -actuator driven proportional control valve

    Kajaste, J., Kostamo, J., Kauranne, H., Suorsa, I. & Pietola, M., 2006, The 5th International Conference on Advanced Engineering Design, AED 2006, Prague, Czech Republic, June 11-12, 2006. p. 8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. Published

    Realization of a magnetorheological (MR) force actuator

    Kostamo, J., Kajaste, J. & Pietola, M., 2006, The 5th International Conference on Advanced Engineering Design, AED 2006, Prague, Czech Republic, JUne 11-14, 2006. p. 9

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. 2005
  14. Published

    Condition monitoring of fluid power pump

    Kauranne, H., Kajaste, J. & Pietola, M., 2005, The Ninth Scandinavian International Conference on Fluid Power, SICFP'05, Linköping, Sweden, June 1-3, 2005. p. 26-27

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. Published

    Effect of contamination on wear of proportional control valves

    Laitinen, L. & Pietola, M., 2005, The Ninth Scandinavian International Conference on Fluid Power, SICFP'05, Linköping, Sweden, June 1-3, 2005. p. 12-13

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Effect of parameter uncertainty on reliability of hydraulic transmission system simulation

    Ellman, A., Kauranne, H., Kajaste, J. & Pietola, M., 2005, Proceedings of IMECE2005. 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, November 5-11, 2005. p. 7

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Experimental validation of different models for effective bulk modulus of hydraulic fluid

    Kajaste, J., Kauranne, H., Ellman, A. & Pietola, M., 2005, The Ninth Scandinavian International Conference on Fluid Power, SICFP'05, Linköping, Sweden, June1-3, 2005. p. 14-15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    Explicit Finite Element Analysis of Spring-Energized Rotary Face Seal for Industrial Process Machinery

    Calonius, O. & Pietola, M., 2005, The 18th Worldwide Abaqus Users' Conference, Stockholm, Sweden, 18-20 May, 2005. p. 37-56

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    Explicit Finite Element Analysis of Tracking Capability of Rotary Face Seals foe Industrial Fluid Power Applications

    Calonius, O. & Pietola, M., 2005, The Sixth JFPS International Symposium on Fluid Power, Tsukuba, Japan, 7-10 November 2005. p. 6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  20. Published

    Finite element analysis of large diameter face seals for process machinery

    Calonius, O. & Pietola, M., 2005, CSC Report on Scientific Computing 2004-2005. Espoo: CSC - Scientific Computing Ltd., p. 144-149

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  21. 2004
  22. Published

    Aging-dependent characteristic changes of a pressure control valve for a model-based monitoring fluid power

    Laitinen, L., Kauranne, H. & Pietola, M., 2004, Bath Workshop on Power Transmission & Control, PTMC 2004, 1-3 September, 2004. p. 285-295

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  23. Published

    Hydraulic proportional valves - evaluation of changes in performance characteristics for condition monitoring purposes

    Laitinen, L. & Pietola, M., 2004, 3rd Fluid Power Net International PhD Symposium, Terrassa, Spain, 30th June to 2nd July, 2004.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  24. Published

    Magnetic Shape Memory (MSM) Actuator As Linear Motor In Proportional Control Valves

    Kajaste, J., Kauranne, H., Suorsa, I. & Pietola, M., 2004, Conference proceedings of the 4th International Fluid Power Conference, Dresden, Germany, March 25th and 26th, 2004. p. 483-494

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. 2003
  26. Published

    Active Structural Control of Hydraulically Supported Machinery

    Heiskanen, K., Juhala, J. & Pietola, M., 2003, 1st International Conference on Computational Methods in Fluid Power Technology, Melbourne, Australia, 26-28 November, 2003. p. 289-301

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Active structural control using hydraulic actuator

    Heiskanen, K., Hakola, J., Laitinen, L. & Pietola, M., 2003, Bath Workshop on Power Transmission and Control, Bath, England, 10-12 September, 2003. p. 119-129

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Active Vibration Control of a Large Scale Rotor with a Servohydraulic Control System

    Pietola, M., Kajaste, J., Heiskanen, K., Porkka, E., Valkonen, A. & Järviluoma, M., 2003, Proceedings of the 8th Scandinavian International Conference on Fluid Power, Tampere University of Technology, Tampere, May 7-9, 2003. p. 1201-1208

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Applicability of Pump Models for Varying Operational Conditions

    Kauranne, H., Kajaste, J., Ellman, A. & Pietola, M., 2003, Proceedings of the ASME Conference, Washington, D.C.,November 16-21, 2003. p. 10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Dependency of an Axial Piston Pump Characteristics on Variation of Operating Conditions

    Kauranne, H., Kajaste, J., Ellman, A. & Pietola, M., 2003, Proceedings of the 8th Scandinavian International Conference on Fluid Power, Tampere University of Technology, Tampere, May 7-9, 2003. p. 191-205

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    Effect of Operational Parameters on Pressure Accumulator Dynamics

    Kajaste, J., Kauranne, H., Ellman, A. & Pietola, M., 2003, Proceedings of the 8th Scandinavian International Conference on Fluid Power, Tampere University of Technology, Tampere, May 7-9, 2003. p. 533-547

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Friction phenomena in a water hydraulic cylinder at low-pressure levels

    Laitinen, L., Heiskanen, K., Kajaste, J. & Pietola, M., 2003, Proceedings of the 8th Scandinavian International Conference on Fluid Power, Tampere University of Technology, Tampere, May 7-9, 2003. p. 421-431

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Hydrauliikan tarvelähtöinen kunnossapito

    Kauranne, H., Calonius, O., Laitinen, L. & Pietola, M., 2003, In : Kunnossapito. 6, p. 14-17

    Research output: Contribution to journalArticleProfessional

  34. Published

    The Effect of Parameter Uncertainty on the Realibility of Virtual Testing of Fluid Power Systems

    Pietola, M., 2003, Tukeva Research Programme on Future Mechanical Engineering 2000-2003 Final Report. Tampere, p. 54-58

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  35. Published

    Vibration Suppression with Hydraulic Actuator

    Heiskanen, K., Hakola, J., Laitinen, L. & Pietola, M., 2003, Proceedings of the 8th Scandinavian International Conference on Fluid Power, Tampere University of Technology, Tampere, May 7-9, 2003. p. 523-531

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. 2002
  37. Published

    Power electronics in hydraulic pressure control systems

    Kauranne, H., Kajaste, J., Heiskanen, K. & Pietola, M., 2002, 4th International conference on machine automation ICMA'02, Tampere University of Technology, Tampere, 11-13 September, 2002. p. 311-319

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    The effect of parameter uncertainty on the reliability of pressure accumulator simulations

    Kajaste, J., Kauranne, H., Ellman, A. & Pietola, M., 2002, ASME International Mechanical Engineering Congress & Exposition, New Orleans, Louisiana, USA, 17-22 November, 2002. p. 10

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  39. Published

    The effect of parameter uncertainty on the reliability of virtual testing of fluid power systems

    Vilenius, M., Ellman, A., Nykänen, T., Pietola, M., Kajaste, J. & Kauranne, H., 2002, Mechanical engineering research - new possibilities by co-operation, Tampere 3.1.2002. Hakalehto, K. E. A. (ed.). Academy of Finland, p. 115-123

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. Published

    The effect of uncertain parameter values in pressure accumulator model on the reliability of damping system simulations

    Kajaste, J., Kauranne, H. & Pietola, M., 2002, 4th International conference on machine automation ICMA'02, Tampere University of Technology, Tampere, 11-13 September, 2002. p. 67-75

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  41. Published

    Using a high-speed centrifugal pump as a constant pressure source in water hydraulic systems

    Kajaste, J., Kauranne, H. & Pietola, M., 2002, Bath workshop on power transmission and motion control, PTMC 2002, Bath, U.K., 11-13 September 2002. p. 11

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Vibration suppression of hydraulically supported rotating machinery

    Heiskanen, K., Kajaste, J., Laitinen, L. & Pietola, M., 2002, 4th International conference on machine automation ICMA'02, Tampere University of Technology, 11-13 September, 2002. p. 427-434

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. 2001
  44. Published

    Simulation oriented R&D of hydraulically driven machines

    Ellman, A., Käppi, T., Kauranne, H., Kajaste, J., Heiskanen, K. & Pietola, M., 2001, Modelling and simulation of multitechnological machine systems. Holopainen, T. (ed.). Espoo: VTT Technical Research Centre of Finland, p. 139-175

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  45. Published

    Simulation-oriented R&D of hydraulically driven machines

    Ellman, A., Käppi, T., Kauranne, H., Kajaste, J., Heiskanen, K. & Pietola, M., 2001, Smart machines and systems - Recent advances in mechatronics in Finland. Airila, M. (ed.). Espoo: Helsinki University of Technology, p. 213-247 (Helsinki University of Technology publications in Machine design ; no. 1/2001).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  46. Published

    The feasability of a high-speed centrifugal pump in low pressure water hydraulic systems

    Kajaste, J. & Pietola, M., 2001, The Seventh Scandinavian International Conference on Fluid Power, Linköping, Sweden, May 30th, 2001. p. 337-351

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. 2000
  48. Published

    Hydrauliikan kehitys liikkuvassa kalustossa

    Pietola, M., 2000, Autoalan koulutuskeskus, 13/2000. p. 29

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  49. 1999
  50. Published

    Hydraulitekniikan tutkimus ja opetus TKK:n Koneensuunnittelun laboratoriossa

    Pietola, M., 1999, In : Teollisuuden näytelehti. 14, p. 32-33

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    The Effect of Mechanical Elasticity in the Dynamic Characteristics of Electrohydraulic Servo Systems

    Pietola, M., Lindberg, I. & Vilenius, M., 1999, In : Journal of the Japan Hydraulics & Pneumatics Society. 30, 7, p. 538-554

    Research output: Contribution to journalArticleScientificpeer-review

  52. 1996
  53. Published

    Usefulness of High Resolution Thermography in Fault Diagnosis of Fluid Power Components and Systems

    Pietola, M. & Varrio, J., 1996, SPIE - The International Society for Optical Engineering, Thermosense XVIII: An International Conference on Thermal Sensing and Imaging Diagnostic Applications, April 10.-12.1996, Orlando, Florida, US. p. 101-109

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. 1995
  55. Published

    Työkonehydrauliikan kehitystilanne

    Pietola, M., 1995, Työkoneet ja hydrauliikka, Helsinki, 14.-15.11.1995. Helsinki: Autoalan koulutuskeskus Oy, p. s. VI/1-33

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Using a high resolution thermograph in predictive maintenance and fault diagnosis of fluid power components and systems

    Pietola, M., Mäkinen, R., Väyrynen, P., Kesanto, S. & Varrio, J., 1995, The Fourth Scandinavian International Conference on Fluid Power, Tampere, 26.-29.9.1995. Tampere: Tampere University of Technology, p. 719-727

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. 1994
  58. Published

    Sähköhydrauliikan kehitys työkoneissa ja raskaassa kalustossa

    Pietola, M., 1994, Raskaan kaluston ja työkoneiden elektroniikka, 12.-13.4.1994. Helsinki: Autoalan koulutuskeskus Oy

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. 1992
  60. Published

    Hydrauliikan kehitys liikkuvassa kalustossa

    Pietola, M., 1992, Ajoneuvohydrauliikan päivät, Helsinki, 17.-18.11.1992. Helsinki: Autoalan koulutuskeskus SATL, p. 1-30

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Hydrauliikan käyttö autotekniikassa

    Surakka, M. & Pietola, M., 1992, Otaniemi, (Auto- ja työkonetekniikan tutkimusraportti; no. 1992/2).

    Research output: Working paperProfessional

Previous 1 2 3 Next

ID: 80351