Matti Pietola

Professor

Research outputs

  1. 2014
  2. Published

    HIL simulation of elastomer supported machine bed dynamics

    Saarikoski, T. & Pietola, M., 2014, 8th FPNI Ph.D Symposium on Fluid Power, FPNI 2014. 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  3. Published

    Improving Energy Efficiency of Reach Truck Utilizing Hydraulic Transformer Based Recovery System

    Hänninen, H. & Pietola, M., 2014, The 9th International Conference on Fluid Power (IFK),24 - 26 March 2014, Aachen, Germany. Murrenhoff, H. (ed.). Germany, Aachen, p. 86-94

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  4. Published

    Magnetorheologically Damped Compliant Foot for Legged Robotic Application

    Kostamo, E., Focchi, M., Guglielmino, E., Kostamo, J., Semini, C., Buchli, J., Pietola, M. & Caldwell, D., 2014, In : Journal of Mechanical Design. 136, 2

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Pilot operated miniature valve with fast response and high flow capacity

    Lantela, T., Kajaste, J., Kostamo, J. & Pietola, M., 2014, In : INTERNATIONAL JOURNAL OF FLUID POWER. 15, 1, p. 11-18

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    POSITION CONTROL OF DIRECT DRIVEN HYDRAULIC DRIVE

    Bonato, C., Minav, T., Sainio, P. & Pietola, M., 2014, The 8th FPNI Ph.D Symposium on Fluid Power FPNI 14 June 11-13, 2014, Lappeenranta, Finland. ASME, V001T05A007

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  7. Published

    Toward Better Energy Regeneration and Efficiency through Hydraulic Fluid Selection in an Electro-Hydraulic Forklift

    Minav, T., Schimmel, T. & Pietola, M., 2014, The 9th International Fluid Power Conference, 9. IFK, March 24-26, 2014, Aachen, Germany. Murrenhoff, H. (ed.). Aachen, Germany, p. 236-242

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  8. Published

    TOWARDS BETTER ENERGY EFFICIENCY THROUGH SYSTEMS APPROACH IN AN INDUSTRIAL FORKLIFT

    Minav, T. A., Schimmel, T., Murashko, K., Åman, R., Pyrhönen, J. J. & Pietola, M., 2014, In : PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D: JOURNAL OF AUTOMOBILE ENGINEERING. 228, 8

    Research output: Contribution to journalArticleScientificpeer-review

  9. 2013
  10. Published

    Analysis on the Adaptability of Two Different Hydraulic Energy Recovery Circuits on Various Machine Types and Work Cycles

    Hänninen, H. & Pietola, M., 2013, ASME/BATH 2013 Symposium on Fluid Power & Motion Control (FPMC2013); Sarasota, Florida, USA; October 6-9, 2013. Barth, E. & Vacca, A. (eds.). Sarasota, Florida, USA: The University of Bath Center for Power Transmission and Motion Control (PTMC) and ASME Fluid Power Systems Technology Division (FPST)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  11. Published

    Modelling of a working cycle of an electro-hydraulic forklift in Matlab Simulink

    Minav, T., Filatov, D., Pyrhönen, J. & Pietola, M., 2013, In : INTERNATIONAL REVIEW ON MODELLING AND SIMULATIONS. 6, 6, p. 808

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2012
  13. Published

    Effect of the plate surface characteristics and gap height on yield stresses of a magnetorheological fluid

    Jönkkäri, I., Kostamo, E., Kostamo, J., Syrjälä, S. & Pietola, M., 2012, In : Smart Materials and Structures. 21, 7, p. 1001-1010

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Magnetorheological valve in servo applications

    Kostamo, E., Kostamo, J., Kajaste, J. & Pietola, M., 2012, In : JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES. 23, 9, p. 1001-1010

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    OPTIMIZING DYNAMIC PROPERTIES OF HYDRAULIC ACTUATOR FOR HARDWARE-IN-THE-LOOP DAMPER TESTING

    Saarikoski, T., Kajaste, J. & Pietola, M., 2012, Bath/ASME Symposium on Fluid Power & Motion Control (FPMC 2012). Dr D N Johnston, P. A. P. (ed.). Bath, UK: University of Bath, Centre for Power Transmission and Motion Control, p. 365-377

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    OPTIMIZING HYDRAULIC ENERGY RECOVERY SYSTEM OF REACH TRUCK

    Hänninen, H., Kajaste, J. & Pietola, M., 2012, Bath/ASME Symposium on Fluid Power & Motion Control (FPMC 2012). Dr D N Johnston, P. A. P. (ed.). Bath, UK: University of Bath, Centre for Power Transmission and Motion Control, p. 109-121

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    THERMAL INSULATION IN ENHANCING PERFORMANCE CHARACTERISTICS OF HYDRAULIC ACCUMULATOR

    Juhala, J., Kajaste, J. & Pietola, M., 2012, Bath/ASME Symposium on Fluid Power & Motion Control (FPMC 2012). Dr D N Johnston, P. A. P. (ed.). Bath, UK: University of Bath, Centre for Power Transmission and Motion Control, p. 81-92

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. 2011
  19. Published

    Fatigue life and surface integrity measurements of EN S355J2 steel used in hydraulic components

    Čuban, J., Calonius, O., Pietola, M. & Jersák, J., Dec 2011, In : Manufacturing Technology. 11, p. 5-11 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Analysis of Energy Balance in Electrohydraulic Forklift

    Sinkkonen, A., Hänninen, H., Kauranne, H. & Pietola, M., 2011, The 12th Scandinavian International Conference on Fluid Power (SICFP'11), Tampere, Finland, May 18-20, 2011. Sariala, H. & Koskinen, K. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 193-204

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Design of a Pilot Operated Miniature Digital Valve

    Lantela, T., Juhala, J., Kostamo, J. & Pietola, M., 2011, The 4th Workshop on Digital Fluid Power (DFP '11), Linz, Austria, September 21-11, 2011. Scheidl, R. & Winkler, B. (eds.). Linz, Itävalta: Austrian Center of Competence in Mechatronics, p. 138-154

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Energy usage in mast system of Electrohydraulic Forklift

    Sinkkonen, A., Hänninen, H., Kauranne, H. & Pietola, M., 2011, In : VENTIL - JOURNAL FOR HYDRAULICS, AUTOMATION AND MECHATRONICS. 6, p. 500-506

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Equipping Reach Truck with Hydraulic Energy Recovery System

    Hänninen, H., Kauranne, H., Sinkkonen, A. & Pietola, M., 2011, In : VENTIL - JOURNAL FOR HYDRAULICS, AUTOMATION AND MECHATRONICS. 6, p. 508-515

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Fatigue life and surface integrity of EN S355J2 steel used in hydraulic components

    Cuban, J., Calonius, O., Pietola, M. & Jersák, J., 2011, In : Manufacturing Technology. 11, 11, p. 5-11

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Hardware-in-the-Loop Simulation as Test Method for Hydraulic Dampers

    Saarikoski, T., Kajaste, J. & Pietola, M., 2011, The 12th Scandinavian International Conference on Fluid Power (SICFP'11), Tampere, Finland, May 18-20, 2011. Sairiala, H. & Koskinen, K. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 281-294

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    HYDRAULIC ACCUMULATOR AS ENERGY STORAGE, IMECE2011-63780

    Juhala, J. & Pietola, M., 2011, ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, Colorado, USA, November 11-17, 2011.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published

    Improving Energy Efficiency of Hydraulic Accumulator

    Juhala, J., Kajaste, J. & Pietola, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power (SICFP'11), Tampere, Finland, May 18-20, 2011. p. 99-110

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Magnetorheological Fluidic Muscle as Semi-Active Damper

    Keski-Honkola, P., Varga, Z. & Pietola, M., 2011, The Twelfth Scandinavian International Conference on Fluid Power, SICFP'11. Sairala, H. & Koskinen, K. T. (eds.). Tampereen teknillinen yliopisto, Department of Intelligent Hydraulics and Automation, p. 149-158

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Magnetorheological valve in servo applications

    Kostamo, E., Kostamo, J., Kajaste, J. & Pietola, M., 2011, ELECTRO-RHEOLOGICAL FLUIDS AND MAGNETO-RHEOLOGICAL SUSPENSIONS: 12th International Conference on Electrorheological Fluids and Magnetorheological Suspensions, ERMR 2010, Philadelphia, PA, 16 August 2010 - 20 August 2010. p. 164-171

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published

    Study on Energy Usage of Reach Truck Equipped with Energy Recovery System

    Hänninen, H., Kauranne, H., Sinkkonen, A. & Pietola, M., 2011, The 12th Scandinavian International Conference on Fluid Power (SICFP'11), Tampere, Finland, May 18-20, 2011. Sariala, H. & Koskinen, K. (eds.). Tampere: Tampere University of Technology, Department of Intelligent Hydraulics and Automation, p. 179-188

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. 2010
  32. Published

    Application of Hydraulic Sine Generator to Active Vibration Control

    Kostamo, J., Kostamo, E., Kajaste, J. & Pietola, M., 2010, Bath/ASME Symposium on Fluid Power & Motion Control, Bath, 2010. Johnston, D. N. & Plummer, A. R. (eds.). Bath, Great Britain: University of Bath, p. 175-186

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Comparing hybrid power transmission systems of work machines

    Hänninen, H., Juhala, J., Sinkkonen, A., Hentunen, A. & Pietola, M., 2010, 7th International Conference on Fluid Power (IFK) , Aachen, Germany, 22-24 March 2010. Murrenhoff, H. (ed.). Germany: RWTH Aachen, p. 189-200

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Development and Performance Evaluation of a Magnetorheological Valve Designed for Control Applications

    Kostamo, J., Kostamo, E., Kajaste, J. & Pietola, M., 2010, 2010 ASME Dynamic Systems andControl Conference (DSCC2010), Cambridge, Massachusetts, USA, September12-15. ASME

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. Published

    Dynamic Modeling of a Magnetorheological Rotation Rheometer

    Kostamo, E., Kostamo, J., Kajaste, J. & Pietola, M., 2010, Bath/ASME Symposium on Fluid Power & Motion Control, Bath, 2010. Johnston, D. N. & Plummer, A. R. (eds.). Bath, Great Britain: University of Bath, p. 27-37

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  36. Published

    Energy Losses in Piston Type Hydraulic Accumulator

    Juhala, J., Kauranne, H. & Pietola, M., 2010, 7th International Fluid Power Conference (7th IFK), Aachen, Germany, 22 - 24 March, 2010. p. 177-188

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Experimental Study of Performance of Large Diameter Shaft Seals with Laser Micro-structured Counterface

    Hänninen, H., Calonius, O. & Pietola, M., 2010, 7th International Conference on Fluid Power (IFK), Aachen, Germany, 22-24 March 2010. Murrenhoff, H. (ed.). Germany: RWTH Aachen, p. 275-286

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Magnetorheological High Frequency Servo Valve

    Kostamo, E., Kostamo, J., Kajaste, J. & Pietola, M., 2010, p. 1-12.

    Research output: Working paperProfessional

  39. Published

    Principle of Active Vibration Damping Using Pneumatic McKibben Type Muscle Actuator

    Keski-Honkola, P., Kajaste, J. & Pietola, M., 2010, 7th International Fluid Power Conference Aachen, Germany, 223.2010 - 24.3.2010. Murrenhoff, H. (ed.). Germany: Apprimus Verlag, p. 183-194

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  40. 2009
  41. Published

    Design and Implementation of Digital Hydraulic Syncronization and Force Control System

    Linjama, M., Hopponen, V., Ikonen, A., Rintamäki, P., Vilenius, M. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power (SICPF'09), Linköping, Sweden, June 2-4, 2009.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  42. Published

    Energy Efficient Digital Hydraulic Force Control

    Hopponen, V., Linjama, M., Ikonen, A., Rintamäki, P., Pietola, M. & Vilenius, M., 2009, The 11th Scandinavian International Conference on Fluid Power (SICPF'09), Linköping, Sweden, June 2-4, 2009.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  43. Published

    Experimental Study on Performance of Twin Radial Seals with Controlled Hydraulic Lubrication

    Hänninen, H., Calonius, O. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power, Linköping, Sweden, 2.6.2009 - 4.6.2009. Sweden: Linköping University

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  44. Published

    Extended abstract of Experimental Study on Performance of Twin Radial Seals with Controlled Hydraulic Lubrication

    Hänninen, H., Calonius, O. & Pietola, M., 2009, The 11st Scandinavian International Conference on Fluid Power, Linköping, Sweden, 2.6.2009 - 4.6.2009. Linköping University, p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  45. Published

    Extended Abstract of Improving energy efficiency of work machine with Digital Hydraulics and pressure accumulator

    Juhala, J., Kauranne, H., Kajaste, J. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power (SICFP'09), Linköping, Sweden, June 2-4, 2009. Linköping, Sweden: Linköping University, Institute of Technology, p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Improving energy efficiency of work machine with Digital Hydraulics and pressure accumulator

    Juhala, J., Kauranne, H., Kajaste, J. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power (SICPF'09), Linköping, Sweden, June 2-4, 2009. Linköping, Sweden: Linköping University, Institute of Technology, p. 15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Reducing Pneumatic Muscle Force Response Time for Active Vibration Damping Purposes

    Keski-Honkola, P., Kajaste, J. & Pietola, M., 2009, The 11th Scandinavian International Conference on Fluid Power, Linköping, Sweden, 2.6.2009 - 4.6.2009. Sweden: Linköping University, p. 2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  48. 2008
  49. Published

    Design and experimental evaluation of a fast magnetorheological (MR) actuator

    Kostamo, J., Kostamo, E., Kajaste, J. & Pietola, M., 2008, 6th International Fluid Power Conference, Dresden, 2008. p. 215-228

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Fluidic muscle as elastic machine support

    Keski-Honkola, P., Kajaste, J. & Pietola, M., 2008, Smart Systems 2008, Seinäjoki, Finland, June 4-5, 2008. Seinäjoki: Seinäjoen Teknologiakeskus Oy, p. 48-53

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Generating Vibration with Artificial Muscles

    Keski-Honkola, P. & Pietola, M., 2008, In : VENTIL - JOURNAL FOR HYDRAULICS, AUTOMATION AND MECHATRONICS. 14, 6, p. 558-563

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Magnetorheological fluid technology based semi-active damper

    Kajaste, J., Kostamo, E., Kostamo, J., Keski-Honkola, P. & Pietola, M., 2008, Smart Systems 2008, Seinäjoki, Finland, June 4-5, 2008. Seinäjoki: Seinäjoen Teknologiakeskus Oy, p. 60-67

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Magnetorheological (MR) damper with a fast response time

    Kostamo, J., Kostamo, E., Kajaste, J. & Pietola, M., 2008, FPMC 2008 - Bath/ASME Symposium on Fluid Power & Motion Control, Bath UK, 10-12 September, 2008. Bath: University of Bath, p. 169-182

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Magnetorheological technology in high frequency applications

    Kostamo, E., Kostamo, J., Kajaste, J., Kuosmanen, P. & Pietola, M., 2008, 53rd IWK - Internationales Wissenschaftliches Kolloquium, Ilmenau, Germany, 8-12 September, 2008. p. 15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Pressure Control in Digital Hydraulics

    Juhala, J. & Pietola, M., 2008, 5th Ph.D. Symposium Fluid Power net International (FPNI), Krakow 1-5.7.2008. Fluid Power net International, p. 11

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Study of lubrication conditions in slipper-swashplate contact in water hydraulic axial piston pump test rig

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, 7th JFPS International Symposium on Fluid Power, Toyama Japan, 15-18 September 2008.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Tribological conditions between swashplate and slipper pad in water hydraulic axial piston unit test rig with variable swash angle

    Rokala, M., Calonius, O., Koskinen, K. T. & Pietola, M., 2008, 6th International Fluid Power Conference, Dresde Germany, 31 March - 2 April 2008.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

ID: 80351