Markus Turunen

University Lecturer

Research outputs

  1. 2015
  2. Published

    Mechanical Analysis of Ultrasound-Activated Pins and Resorbable Screws: Two Different Techniques to Fixate Osteosynthesis in Craniosynostosis Surgery

    Savolainen, M., Ritvanen, A., Koljonen, V., Turunen, M., Hulkkonen, H., Vuorinen, V. V. & Leikola, J. P., 2015, In : JOURNAL OF CRANIOFACIAL SURGERY. 26, 4, p. 1234-1237

    Research output: Contribution to journalArticle

  3. 2012
  4. Published

    A reliability study of adhesion mechanism between liquid crystal polymer and silicone adhesive

    Li, J., Turunen, M., Niiranen, S., Chen, H. & Paulasto-Kröckel, M., 2012, In : Microelectronics Reliability. 52, Dec., p. 29622969

    Research output: Contribution to journalArticle

  5. Published
  6. Published

    Interfacial Compatibility in Microelectronics: Away From the Trial and Error Approach

    Laurila, T., Vuorinen, V., Turunen, M., Mattila, T. T., Paulasto-Kröckel, M. & Kivilahti, J., 2012, Germany. 217 p.

    Research output: Book/ReportBook

  7. 2006
  8. Published

    Reactive blending approach to modify spin-coated epoxy film: Part II. Crosslinking kinetics

    Turunen, M. P. K., Laurila, T. & Kivilahti, J. K., 15 Sep 2006, In : Journal of Applied Polymer Science. 101, 6, p. 3689-3696 8 p.

    Research output: Contribution to journalArticle

  9. Published
  10. 2005
  11. Published

    Evaluation of electrolessly deposited NiP integral resistors on flexible polyimide substrate

    Waris, T. F., Turunen, M. P. K., Laurila, T. & Kivilahti, J. K., Mar 2005, In : Microelectronics Reliability. 45, 3-4, p. 665-673 9 p.

    Research output: Contribution to journalArticle

  12. Published

    Design and Fabrication of Remote Readable pH-sensor for Biomedical Applications

    Turunen, M. P. K., Aintila, A. & Kivilahti, J., 2005, 2nd International Workshop on NanoBio-Electronics Packaging, Atlanta, Georgia, USA, 22.-23.March 2005.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. 2004
  14. Published

    A new pH-sensor using a polymer layer on an interdigital-capacitor

    Turunen, M. P. K., Suhag, S. & Kivilahti, J., 2004, (National Conference on Electronics Circuits and Communications Systems (ECCS-2004), 23.-24.September 2004, Patiala, India).

    Research output: Working paperProfessional

  15. Published

    Determination of Thermal transitions of thin polymeric films from refractive index data

    Turunen, M. P. K., Marjamäki, P., Paajanen, M., Lahtinen, M. & Kivilahti, J. K., 2004, In : Microelectronics Reliability. 44, p. 993-1007

    Research output: Contribution to journalArticle

  16. Published

    Pull-off test in the assessement of adhesion at printed wiring board metallisation/epoxy interface

    Turunen, M. P. K., Marjamäki, P., Paajanen, M., Lahtinen, J. & Kivilahti, J. K., 2004, In : Microelectronics Reliability. 44, p. 993-1007

    Research output: Contribution to journalArticle

  17. Published

    Reactive blending approach to modify spin-coated epoxy film

    Turunen, M. P. K., Laurila, T., Solehmainen, K. & Kivilahti, J. K., 2004, Espoo, p. 42, (Electronics Production Technology publication series; no. HUT-EPT-10).

    Research output: Working paperProfessional

  18. Published

    Uudet materiaalit bioadaptiivisessa elektroniikassa

    Turunen, M. P. K. & Kivilahti, J. K., 2004, In : MATERIA. 61, 4, p. 42-46

    Research output: Contribution to journalArticle

  19. 2003
  20. Published

    Effects of Surface Treatments on the Adhesion of Copper Metallization to Inorganic-Organic Hybrid Material

    Ge, J., Turunen, M., Kusevic, M. & Kivilahti, J., 2003, In : Journal of Materials Science. 18, 11, p. 2697-2707

    Research output: Contribution to journalArticle

  21. Published

    Evaluation of the Environmental Reliability of Polymer wave guides fabricated on Printed Wiring Board

    Turunen, M., Immonen, M. & Kivilahti, J., 2003, Polytronic 2003, Montreux Switzerland, 21-23.10.2003. France: TIMA Laboratory and the IEEE Components, Packaging and Manufacturing Technology Society

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  22. Published

    Surface Modification and Characterization of Photodefinable Epoxy/Copper Systems

    Ge, J., Turunen, M. & Kivilahti, J., 2003, In : Thin Solid Films. 1-2, p. 198-204

    Research output: Contribution to journalArticle

  23. Published

    Surface modification of a liquid crystalline polymer for copper metallization

    Ge, J., Turunen, M. & Kivilahti, J. K., 2003, In : Journal of Polymer Science Part B: Polymer Physics. 41, 6, p. 623-636

    Research output: Contribution to journalArticle

  24. Published

    The Evaluation of Environmental Reliability of Polymer Wave-Guides frabricated on PWBs

    Turunen, M. P. K., Immonen, M. & Kivilahti, J. K., 2003, Polytronics, Montreaux, France, October 20.-23., 2003.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. 2002
  26. Published

    Evaluation of the surface free energy of spin-coated photodefinable epoxy

    Turunen, M. P. K., Laurila, T. & Kivilahti, J. K., 15 Sep 2002, In : Journal of Polymer Science Part B: Polymer Physics. 40, 18, p. 2137-2149 13 p.

    Research output: Contribution to journalArticle

  27. Published

    Synthesis, characterization and crosslinking of functional star-shaped poly(epsilon-caprolactone)

    Turunen, M., Korhonen, H., Tuominen, J. & Seppälä, J. V., 2002, In : Polymer International. 51, 1, p. 92-100 9 p.

    Research output: Contribution to journalArticle

ID: 81749