Jyrki Romu

  • Otakaari 4

19932018

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

1993

High-Nitrogen Austenitic Stailess Steel Manufacturing Technologies

Romu, J. & Hänninen, H., 1993, Espoo, (Julkaisu /Materiaalitekniikan laboratorio; no. MTR 1/93).

Research output: Working paperProfessional

Wear Resistance of High Nitrogen Austenitic Stainless Steels Manufactored by Molten and Powder Metallurgy Routes

Romu, J., Tervo, J., Hänninen, H. & Liimatainen, J., 1993, 3rd Int. Conference on High Nitrogen Steels HNS 93, Part II, 14.-16.9.1993, Kiev, Ukraine. p. 372-378

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

1994

Nitrogen Alloyed Martensitic Steels

Romu, J., Liu, Y. & Hänninen, H., 1994, Espoo, p. 108, (MTR; no. 1/94).

Research output: Working paperProfessional

1995

Development of Properties of P/M Austenitic Stainless Steels by Nitrogen Infusion

Romu, J., Tervo, J., Hänninen, H. & Liimatainen, J., 1995, 4th International Conference High Nitrogen Steels, HNS-95, Kioto, Japan, 27.-29.9.1995. p. 8

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

8 Citations (Scopus)

HIPed P/M High Nitrogen Austenitic Stainless Steels

Tervo, J., Romu, J., Hänninen, H. & Liimatainen, J., 1995, p. 25, (Nordisk Konferns i Pulverteknik, 21.-22. November 1995, Stockholm).

Research output: Working paperProfessional

1996

Development of properties of P/M austenitic stainless steels by nitrogen infusion

Romu, J. J., Tervo, J., Hänninen, H. & Liimatainen, J., 1996, In : ISIJ International. 36, 7, p. 938-946 9 p.

Research output: Contribution to journalArticleScientificpeer-review

8 Citations (Scopus)
1997

Corrosion and mechanical properties of nitrogen alloyed P/M HIP austentic stainless steels

Romu, J., Tervo, J. & Hänninen, H., 1997, Joint nordic conference in powder technology, 26.-27.11.1997, Hotelli Marski, Helsinki. p. 1

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Properties of P/M High Nitrogen Austenitic and Duplex Stainless Steels

Tervo, J., Romu, J., Hämäläinen, E., Hänninen, H. & Liimatainen, J., 1997, 5th international conference on advanced particulate materials and Processes, 7.-9.4.1997, West Palm Beach, Florida, USA. p. 317-329

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

3 Citations (Scopus)
1998

Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels

Romu, J. & Hänninen, H., 1998, 5th International Conference of High-Nitrogen Steels -98, Espoo-Stockholm, May 24-28, 1998. Hänninen, H., Herzman, S. & Romu, J. (eds.). p. 673-680

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

7 Citations (Scopus)
1999

Effect of nitrogen alloying on elastic coefficients of austenitic stainless steels

Tervo, J. & Romu, J., 1999, 5th International Conference of High-Nitrogen Steels -98, Espoo-Stockholm, May 24-28. Hänninen, H., Herzman, S. & Romu, J. (eds.). p. 41-46

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of nitrogen content on precipitation during isothermal annealing of P/M high nitrogen austenitic stainless steels

Romu, J. & Hänninen, H., 1999, In : Materials Science Forum. 318-320, p. 673-680 8 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Nitrogen alloyed PM materials

Romu, J., Karlsten, W. L., Hänninen, H. E. & Liimatainen, J., 1999, Joint Nordic Conference in Powder Technology, Oslo, Norway, May 5-6. p. 36

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of Recrystallisation Annealing on Grain Refinement for Superplastic Forming of Cold Rolled AA 5083 Aluminium Base Alloy

Yagodzinskyy, J., Pimenoff, J., Romu, J., Tarasenko, O. & Hänninen, H., 2000, ADVANCES IN MECHANICAL BEHAVIOUR, PLASTICITY AND DAMAGE, VOLS 1 AND 2, PROCEEDINGS. p. 275-280 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2001

Effects of Processing and Manufacturing of High Nitrogen-containing Stainless Steels on their Mechanical, Corrosion and Wear Properties

Hänninen, H., Romu, J., Ilola, R., Tervo, J. & Laitinen, A., 23 Nov 2001, In : Journal of Materials Processing Technology. 117, 3, p. 424-430

Research output: Contribution to journalArticleScientificpeer-review

Effects of the temperature of warm rolling on the superplastic behaviour of AA5083 aluminium base alloy

Pimenoff, J., Yagodzinskyy, Y., Romu, J. & Hänninen, H., Jan 2001, In : Materials Science Forum. 357-359, p. 277-282 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Superplastic Forming of Commercial Grade Aluminium and Stainless Steel Sandwich Panels

Pimenoff, J., Yagodzinskyy, Y., Romu, J. & Hänninen, H., 2001, International Congress on Advanced Materials and Processes (Materials Week 2001), 1st-14th October, 2001, Munich, Germany.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Superplastisuus kevytrakenteiden valmistuksessa

Romu, J., 2001, Kevyet rakenteet ja materiaalit koneenrakennuksessa - koulutus, 6.-8.2.2001, Tampereen teknillisen korkeakoulun täydennyskeskus Edutech, Tampere. p. 25

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2002

Alumiinin superplastinen muovaus

Romu, J., 2002, Alumiinipäivät 2002, 24. - 25.10. 2002, Sokos Hotel Lahden Seurahuone, Lahti. p. 26

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Metallien superplastinen muovaus

Pimenoff, J. & Romu, J., 2002, Helsinki, (Tekninen tiedotus, MET-julkaisuja 11/2002).

Research output: Working paperProfessional

Superplasticity and Superplastic Forming in Finland - Recent Advancements and Future Prospects

Pimenoff, J., Romu, J., Yagodzinskyy, Y. & Hänninen, H., 2002, 2nd Joint European Meeting on Superplasticity and Superplastic Forming (Euro-SPF 02), 13th-15th June, 2002, Bristol, Great Britain. p. 8

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Superplasticity in stainless steels

Romu, J. & Hänninen, H., 2002, Espoo, (TKK Raportti MTR 1/02).

Research output: Working paperProfessional

Superplastinen muovaus

Romu, J., 2002, Levytekniikan teemapäivät, Steel Forum 2002, 10.-11.10.2002, Rantasipi EDEN, Nokia. p. 23

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2003

Katalyyttipinnat ja niiden valmistus

Ilola, R., Romu, J., Papula, S. & Hänninen, H., 2003, Espoo, p. 49, (TKK Raportti MTR 1/03).

Research output: Working paperProfessional

Pintojen likaantumisen estäminen katalyyttisesti-PLIESKA

Romu, J., Ilola, R., Yagodzinskyy, Y., Papula, S. L. & Carpén, L., 2003, Likaantumattomat pinnat-Teknologiaohjelman seminaari, 21.-22.10.2003, Hanasaari-Ruotsalaissuomalainen kulttuurikeskus, Espoo. p. 15

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Summary of Recent Research on N-alloying of Steels in Finland

Hänninen, H., Talonen, J., Romu, J., Leinonen, H., Laitinen, A. & Korhonen, M., 2003, International Conference on High Nitrogen Steels HNS 2003, Schaffhausen, Switzerland, 26-28.3.2003. p. 31-42

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2004

Grain refinement processes for superplastic forming of AISI 304 and 304L austenitic stainless steels

Yagodzinskyy, Y., Pimenoff, J., Tarasenko, O., Romu, J., Nenonen, P. & Hänninen, H., Jul 2004, In : Materials Science and Technology. 20, 7, p. 925-929 5 p.

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Grain Refinement Process for Superplastic Forming of AISI 301 and 304L Austenitic Stainless Steels

Yagodzinskyy, Y., Pimenoff, J., Tarasenko, J., Romu, J., Nenonen, P. & Hänninen, H., 2004, In : Materials Science and Technology. 20, p. 925

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Manufacturing of Shaped Forms from Stainless Steels with Superplastic Forming

Romu, J., Yagodzinskyy, Y., Beck, W. & Hänninen, H., 2004, In : Materials Science Forum. 447-448, p. 159-164 6 p.

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Manufacturing of shapes forms from stainless steels with superplastic forming

Romu, J., Yagodzinskyy, Y., Bleck, W. & Hänninen, H., 2004, In : Materials Science Forum. 447-448, p. 159-164

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Nanokiteisen kuparin valmistus, mikrorakenne ja mekaaniset ominaisuudet

Romu, J. & Hänninen, H., 2004, Espoo, p. 77, (TKK Raportti MTR 1/04).

Research output: Working paperProfessional

Nitrogen and Carbon Effects on Mechanisms of Reversion of Martensite to Austenite in Metastable AISI 301 Steel Grades and Their Hot Formability

Yagodzinskyy, Y., Romu, J., Nenonen, P. & Hänninen, H., 2004, 7th International Conference on High Nitrogen Steels, HNS 2004, September 19-22, 2004, Ostend, Belgium. Akdut, N., De Cooman, B. C. & Foct, J. (eds.). p. 103-112

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Superplastic Forming of LDX 2101 (EN 1.4162) Duplex Stainless Steel

Romu, J., Yagodzinskyy, Y., Beck, W. & Hänninen, H., 2004, EuroSPF 2004, European Conference on SuperPlastic Forming, July 7th - 9th, 2004, Albi, France. p. 45-50

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2005

Copper-carbon Composites

Romu, J., Yagodzinskyy, Y. & Hänninen, H., 2005, Espoo, p. 147, (TKK Raportti MTR; no. 6/05).

Research output: Working paperProfessional

Critical Evaluation of the Effect of Alloyed Nitrogen on the Susceptibility of Stainless Steels to Environmentally Induced Cracking

Petterson, R., Flyg, J., Wessman, S., Herting, G., Ibrahim, N., Fatehi, K., Qvarfot, R., Lo Piccolo, E., Scoppio, L., Ladwein, T., Ligier, V., Coudreuse, L., Matres Serrano, V., Hochölter, G., Kristzt, K., Richter, A., Kivisäkk, U., Leinonen, H., Kinnunen, T., Varis, P. & 6 others, Nöjd, K., Ohligschläger, T., Virkkunen, I., Hänninen, H., Romu, J. & Taulavuori, T., 2005, Luxembourg, p. 137, (European Commission Technical Steel Research, Final Report).

Research output: Working paperProfessional

Effect of Forming Temperature and Cooling Rate on Superplastic Formability and Corrosion Resistance of EN 1.4162 Duplex Stainless Steel

Romu, J., Yagodzinskyy, Y., Papula, S., Beck, W. & Hänninen, H., 2005, 4th European Conference on Superplastic Forming - Euro SPF'05, June 22-24, 2005, Manchester, UK. p. 73-77

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Mechanical and Electrical Properties of CNT/copper Nanocomposites Processed by Hot Pressing

Yagodzinskyy, Y., Romu, J. & Hänninen, H., 2005, 12th Annular International Conference on Composites/Nano Engineering, Tenerife, Spain, August 1-6, 2005. p. 2

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2006

Comparative Study of Nitrogen and Carbon Effects on Mechanism of Reversion of a´ Martensite to Austenite in Metastable AISI 301 Steel Grades

Yagodzinskyy, Y., Saukkonen, T., Romu, J. & Hänninen, H., 2006, High nitrogen steels HNS 2006, 29-31 August 2006, Jiuzhaigou, Sichuan, China. Dong, H., Su, J. & Speidel, M. (eds.). p. 59-66

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2008

Open-circuit potential as an indicator of damage of atomic layer deposited TiO2 on AISI 304 stainless steel

Straka, L., Yagodzinskyy, Y., Kawakami, H., Romu, J., Ilola, R. & Hänninen, H., 28 Nov 2008, In : Thin Solid Films. 517, 2, p. 641-647 7 p.

Research output: Contribution to journalArticleScientificpeer-review

10 Citations (Scopus)

Photocatalytic Activity of Atomic Layer Deposited (ALD) TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys

Ilola, R., Kawakami, H., Straka, L., Papula, S., Romu, J., Hänninen, H., Mahlberg, R. & Heikkilä, M., 2008, Euromat 2007, Nürnberg, Saksa, 10.-13.9.2007.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Photocatalytic Activity of Atomic Layer Deposited TiO2 Coatings on Austenitic Stainless Steels and Copper Alloys

Kawakami, H., Ilola, R., Straka, L., Papula, S., Romu, J., Hänninen, H., Mahlberg, R. & Heikkilä, M., 2008, In : Journal of the Electrochemical Society. 155, 2, p. C62-C68 7 p.

Research output: Contribution to journalArticleScientificpeer-review

28 Citations (Scopus)

Puhtaat ympäristöystävälliset metallituotteet - Puhteet-projektin loppuraportti

Mahiout, A., Mannila, J., Mahlberg, R., Nikkola, J., Siivinen, J., Romu, J., Ilola, R., Söderberg, O., Kolari, M., Koskinen, J. & Hannula, S-P., 2008, Espoo, (VTT Tiedotteita - Research notes; no. 2400).

Research output: Working paperProfessional

Soil resistant and self-cleaning surfaces of stainless steel with new Sol-gel and ALD coatings

Mahlberg, R., Mannila, J., Romu, J., Nikkola, J., Ilola, R., Söderberg, O., Koskinen, J., Hannula, S-P. & Mahiout, A., 2008, The 6th European Stainless Steel Conference Science and Market 2008. P. Karjalainen & Hertzman, S. (eds.). Jernkontoret, p. 101-108 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Trends in Forming and Welding of Stainless Steels

Hänninen, H. & Romu, J., 2008, 6th European Stainless Steel Conference, June 10-13, Helsinki, Finland. Karjalainen, P. & Hertzman, S. (eds.). Jernkontoret, The Swedish Steel Producers' Association, p. 779-785

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2009

Effect of substrate deformation on functional properties of atomic-layer-deposited TiO2 coatings on stainless steel

Straka, L., Kawakami, H., Romu, J., Ilola, R., Mahlberg, R., Heikkilä, M. & Hänninen, H., 1 May 2009, In : Thin Solid Films. 517, 13, p. 3797-3805 9 p.

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Hybridipinnoitteilla lisäarvoa metallituotteille

Mahiout, A., Siivinen, J., Mannila, J., Nikkola, J., Mahlberg, R., Romu, J., Ilola, R., Söderberg, O., Virtanen, J., Pehkonen, A., Niemi, R., Katajarinne, T., Koskinen, J., Kivivuori, S. & Hannula, S-P., 2009, Espoo: VTT, (VTT TIEDOTTEITA - RESEARCH NOTES; no. 2517).

Research output: Working paperProfessional

2010

Toughness Properties of Ferritic Stainless Steels

Levonmaa, R., Hänninen, H. & Romu, J., 2010, Espoo, p. 49, (Aalto yliopiston teknillisen korkeakoulu, koneenrakennustekniikan laitos; no. TKK-K-1/10).

Research output: Working paperProfessional

2011

Effect of Selective Dissolution on Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions

Leinonen, H., Pohjanne, P., Saukkonen, T., Schildt, T., Romu, J. & Hänninen, H., 2011, Nace Corrosion 2011 Conference & Expo, March 13-17, 2011, Houston, Texas, USA. 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

6 Citations (Scopus)

Effect of Sodium Sulphide Addition on Selective Dissolution and Stress Corrosion Cracking Susceptibility of Austenitic and Duplex Stainless Steels in Alkaline Solutions

Romu, J., Saukkonen, T., Schildt, T., Hänninen, H., Leinonen, H. & Pohjanne, P., 2011, 7th European Stainless Steel Conference Science and Market, September 21-23, 2011, Como, Italy. AIM-Associazione Italiana di Metallurgia, p. 12

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2 Citations (Scopus)
2012

Effect of Alloy Composition on Stress Corrosion Cracking Susceptibility of Duplex Stainless Steels in Hot Alkaline Sulfide Solution

Leinonen, H., Pohjanne, P., Chasse, K., Singh, P., Romu, J., Saukkonen, T. & Hänninen, H., 2012, NACE Corrosion Conference & Expo, CORROSION 2012, March 11-15, 2012, Salt Lake City, Utah, USA. p. Paper No. C2012-0001746, 21 p

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

1 Citation (Scopus)