Junhe Lian

Assistant Professor

Research outputs

  1. 2019
  2. Published

    Delayed cracking behavior of a meta-stable austenitic stainless steel under bending condition

    He, J., Guo, X., Lian, J., Münstermann, S. & Bleck, W., 19 Dec 2019, In : MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 768, 16 p., 138470.

    Research output: Contribution to journalArticle

  3. Published

    Microstructure-based fatigue modelling with residual stresses: Prediction of the fatigue life for various inclusion sizes

    Gu, C., Lian, J., Bao, Y., Xie, Q. & Münstermann, S., 1 Dec 2019, In : INTERNATIONAL JOURNAL OF FATIGUE. 129, 12 p., 105158.

    Research output: Contribution to journalArticle

  4. Published
  5. E-pub ahead of print
  6. Published

    A strain-gradient isotropic elastoplastic damage model with J3 dependence

    Papadioti, I., Aravas, N., Lian, J. & Münstermann, S., 10 Nov 2019, In : International Journal of Solids and Structures. 174-175, p. 98-127 30 p.

    Research output: Contribution to journalArticle

  7. Published

    Micromechanical modeling of cleavage fracture for a ferritic-pearlitic steel

    He, J., Piao, Z., Wang, X., Lian, J. & Münstermann, S., 1 Nov 2019, In : Engineering Fracture Mechanics. 221, 10668.

    Research output: Contribution to journalArticle

  8. E-pub ahead of print
  9. Published

    Prediction of shear crack formation of lithium-ion batteries under rod indentation : Comparison of seven failure criteria

    Lian, J., Wierzbicki, T., Zhu, J. & Li, W., 1 Aug 2019, In : Engineering Fracture Mechanics. 217, 19 p., 106520.

    Research output: Contribution to journalArticle

  10. Published

    Quantitative Analysis of Inclusion Engineering on the Fatigue Property Improvement of Bearing Steel

    Gu, C., Wang, M., Bao, Y., Wang, F. & Lian, J., 1 Apr 2019, In : Metals. 9, 4, 15 p., 476.

    Research output: Contribution to journalArticle

  11. Published

    Microstructure-based fatigue modelling with residual stresses: Prediction of the microcrack initiation around inclusions

    Gu, C., Lian, J., Bao, Y. & Münstermann, S., 28 Mar 2019, In : Materials Science and Engineering A. 751, p. 133-141 9 p.

    Research output: Contribution to journalArticle

  12. Published

    Numerical study of the effect of inclusions on the residual stress distribution in high-strength martensitic steels during cooling

    Gu, C., Lian, J., Bao, Y., Xiao, W. & Münstermann, S., 1 Feb 2019, In : Applied Sciences (Switzerland). 9, 3, 13 p., 455.

    Research output: Contribution to journalArticle

  13. Published

    Finite element model in abrasion analysis for single-asperity scratch test

    Wechsuwanmanee, P., Lian, J., Sukumaran, J., Kalácska, Ben Hamouda, H., De Baets, P. & Münstermann, S., 1 Jan 2019, Proceedings of the 7th International Conference on Fracture Fatigue and Wear, FFW 2018. Abdel Wahab, M. (ed.). p. 768-779 12 p. (Lecture Notes in Mechanical Engineering).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. Published

    Surface roughness influences on localization and damage during forming of DP1000 sheet steel

    Münstermann, S., Wechsuwanmanee, P., Liu, W. & Lian, J., 2019, 18th International Conference on Sheet Metal, SHEMET 2019, New Trends and Developments in Sheet Metal Processing. Elsevier, p. 504-511 (Procedia Manufacturing; vol. 29).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  15. 2018
  16. Published

    An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction

    Lian, J., Shen, F., Jia, X., Ahn, D. C., Chae, D. C., Münstermann, S. & Bleck, W., 15 Oct 2018, In : International Journal of Solids and Structures. 151, p. 20-44 25 p.

    Research output: Contribution to journalArticle

  17. Published

    A numerical approach to evaluate roughness effects on localization and damage in sheet materials

    Münstermann, S., Wechsuwanmanee, P., Liu, W. & Lian, J., 21 Sep 2018, In : IOP Conference Series: Materials Science and Engineering. 418, 1, 012038.

    Research output: Contribution to journalConference article

  18. Published

    Dynamic fracture of a dual phase automotive steel

    Chandran, S., Verleysen, P., Lian, J., Liu, W. & Münstermann, S., 7 Sep 2018, DYMAT 2018 - 12th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. EDP SCIENCES, Vol. 183. 02047

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    An Experimental Study on the Impact of Deoxidation Methods on the Fatigue Properties of Bearing Steels

    Gu, C., Bao, Y. P., Gan, P., Lian, J. H. & Münstermann, S., 1 Sep 2018, In : Steel Research International. 89, 9, 1800129.

    Research output: Contribution to journalArticle

  20. Published

    Modeling of plasticity and fracture behavior of X65 steels : seam weld and seamless pipes

    Paredes, M., Lian, J., Wierzbicki, T., Cristea, M. E., Münstermann, S. & Darcis, P., 1 Sep 2018, In : International Journal of Fracture. 213, 1, p. 17-36 20 p.

    Research output: Contribution to journalArticle

  21. Published

    Fracture properties of zinc coating layers in a galvannealed steel and an electrolytically galvanized steel

    He, J., Lian, J., Aretz, A., Vajragupta, N., Hangen, U., Goodwin, F. & Münstermann, S., 8 Aug 2018, In : MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 732, p. 320-325 6 p.

    Research output: Contribution to journalArticle

  22. Published

    Evolution of plastic anisotropy and strain rate sensitivity

    Lian, J., Shen, F. & Münstermann, S., 6 Aug 2018, In : Journal of Physics: Conference Series. 1063, 1, 12063.

    Research output: Contribution to journalConference article

  23. Published
  24. Published

    A comparative study on the forming limit diagram prediction between Marciniak-Kuczynski model and modified maximum force criterion by using the evolving non-associated Hill48 plasticity model

    Shen, F., Lian, J. & Münstermann, S., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. AMERICAN INSTITUTE OF PHYSICS, Vol. 1960. 150013

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Forming limit curves of DP600 determined in high-speed Nakajima tests and predicted by two different strain-rate-sensitive models

    Weiß-Borkowski, N., Lian, J., Camberg, A., Tröster, T., Münstermann, S., Bleck, W., Gese, H. & Richter, H., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. AMERICAN INSTITUTE OF PHYSICS, Vol. 1960. 150017

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. Published

    Forming limit prediction by an evolving non-quadratic yield criterion considering the anisotropic hardening and r-value evolution

    Lian, J. & Münstermann, S., 2 May 2018, Proceedings of the 21st International ESAFORM Conference on Material Forming, ESAFORM 2018. AMERICAN INSTITUTE OF PHYSICS, Vol. 1960. 150008

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  27. Published
  28. Published

    Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

    Xie, Q., Gorti, S., Sidor, J. J., An, Y. G., Wang, Y. D., Lian, J., Lan, H. & An, K., 1 Mar 2018, In : Steel Research International. 89, 3, 1700408.

    Research output: Contribution to journalArticle

  29. Published

    The in-depth residual strain heterogeneities due to an indentation and a laser shock peening for Ti-6Al-4V titanium alloy

    Xie, Q., Li, R., Wang, Y. D., Su, R., Lian, J., Ren, Y., Zheng, W., Zhou, X. & Wang, Y. D., 31 Jan 2018, In : MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 714, p. 140-145 6 p.

    Research output: Contribution to journalArticle

  30. Published

    A microstructure sensitive modeling approach for fatigue life prediction considering the residual stress effect from heat treatment

    Gu, C., Lian, J., Bao, Y. & Münstermann, S., 2018, In : Procedia Structural Integrity. 13, p. 2048-2052 5 p.

    Research output: Contribution to journalConference article

  31. Published

    An Experimental and Numerical Investigation of the Anisotropic Plasticity and Fracture Properties of High Strength Steels from Laboratory to Component Scales

    Shen, F., Lian, J., Münstermann, S., Kokotin, V. & Pretorius, T., 2018, ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY. Sedmak, A., Radakovic, Z. & Rakin, M. (eds.). Elsevier Science Publishers BV, p. 1312-1317 6 p. (Procedia Structural Integrity; vol. 13).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. Published

    Plasticity and failure behavior modeling of high-strength steels under various strain rates and temperatures : microstructure to components

    Lian, J., Liu, W., Papadioti, I., Bellas, I., Chandran, S., Verleysen, P., Richter, H., Aravas, N. & Münstermann, S., 2018, In : Procedia Structural Integrity. 13, p. 1421-1426 6 p.

    Research output: Contribution to journalConference article

  33. 2017
  34. Published

    A generalized Orowan model for cleavage fracture

    He, J., Lian, J., Golisch, G., Jie, X. & Münstermann, S., 1 Dec 2017, In : Engineering Fracture Mechanics. 186, p. 105-118 14 p.

    Research output: Contribution to journalArticle

  35. Published

    Extension of the modified Bai-Wierzbicki model for predicting ductile fracture under complex loading conditions

    Wu, B., Li, X., Di, Y., Brinnel, V., Lian, J. & Münstermann, S., 1 Dec 2017, In : Fatigue and Fracture of Engineering Materials and Structures. 40, 12, p. 2152-2168 17 p.

    Research output: Contribution to journalArticle

  36. Published

    Crystal plasticity assisted prediction on the yield locus evolution and forming limit curves

    Lian, J., Liu, W., Shen, F. & Münstermann, S., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. AMERICAN INSTITUTE OF PHYSICS, Vol. 1896. 020030

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  37. Published

    Forming limit curves determined in high-speed Nakajima tests and predicted by a strain rate sensitive model

    Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S. & Bleck, W., 16 Oct 2017, Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017. AMERICAN INSTITUTE OF PHYSICS, Vol. 1896. 020004

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  38. Published

    Comparative Study on Damage Evolution during Sheet Metal Forming of Steels DP600 and DP1000

    Münstermann, S., Lian, J., Pütz, F., Könemann, M. & Brinnel, V., 27 Sep 2017, In : Journal of Physics: Conference Series. 896, 1, 012074.

    Research output: Contribution to journalConference article

  39. Published

    Modeling of Chip Breakage in Machining of AISI 1045 Steel by Using an Improved Damage Mechanics Model

    Wu, B., Buchkremer, S., Münstermann, S., Lian, J., Veselovac, D., Bleck, W. & Klocke, F., 1 Jul 2017, In : Steel Research International. 88, 7, 1600338.

    Research output: Contribution to journalArticle

  40. Published

    Prediction of plasticity and damage initiation behaviour of C45E + N steel by micromechanical modelling

    Wu, B., Vajragupta, N., Lian, J., Hangen, U., Wechsuwanmanee, P. & Münstermann, S., 5 May 2017, In : Materials and Design. 121, p. 154-166 13 p.

    Research output: Contribution to journalArticle

  41. Published
  42. Published

    Investigation on micromechanism and stress state effects on cleavage fracture of ferritic-pearlitic steel at −196 °C

    He, J., Lian, J., Golisch, G., He, A., Di, Y. & Münsterman, S., 16 Feb 2017, In : Materials Science and Engineering A. 686, p. 134-141 8 p.

    Research output: Contribution to journalArticle

  43. Published

    Design of an Experimental Program to Assess the Dynamic Fracture Properties of a Dual Phase Automotive Steel

    Chandran, S., Verleysen, P., Lian, J., Liu, W. & Münstermann, S., 1 Jan 2017, In : Procedia Engineering. 197, p. 204-213 10 p.

    Research output: Contribution to journalConference article

  44. Published

    Dynamic Fracture Behavior of High Strength Pipeline Steel

    Chandran, S., Verleysen, P., Lian, J., Liu, W., Cooreman, S. & Münstermann, S., 1 Jan 2017, In : Procedia Engineering. 197, p. 214-223 10 p.

    Research output: Contribution to journalConference article

  45. 2016
  46. Published

    Damage and fracture loci for a dual-phase steel and a high-strength low-alloyed steel: Revealing the different plastic localization-damage-ductile fracture pattern

    Lian, J., Münstermann, S. & Bleck, W., 19 Oct 2016, ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming. AMERICAN INSTITUTE OF PHYSICS, Vol. 1769. 200020

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  47. Published

    Cold formability prediction by the modified maximum force criterion with a non-associated Hill48 model accounting for anisotropic hardening

    Lian, J., Ahn, D. C., Chae, D. C., Münstermann, S. & Bleck, W., 1 Sep 2016, In : Journal of Physics: Conference Series. 734, 3, 032112.

    Research output: Contribution to journalConference article

  48. Published

    The Second Blind Sandia Fracture Challenge: improved MBW model predictions for different strain rates

    Di, Y., Lian, J., Wu, B., Vajragupta, N., Novokshanov, D., Brinnel, V., Döbereiner, B., Könemann, M. & Münstermann, S., 1 Mar 2016, In : International Journal of Fracture. 198, 1-2, p. 149-165 17 p.

    Research output: Contribution to journalArticle

  49. Published

    The second Sandia Fracture Challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading

    Boyce, B. L., Kramer, S. L. B., Bosiljevac, T. R., Corona, E., Moore, J. A., Elkhodary, K., Simha, C. H. M., Williams, B. W., Cerrone, A. R., Nonn, A. & 40 others, Hochhalter, J. D., Bomarito, G. F., Warner, J. E., Carter, B. J., Warner, D. H., Ingraffea, A. R., Zhang, T., Fang, X., Lua, J., Chiaruttini, V., Mazière, M., Feld-Payet, S., Yastrebov, V. A., Besson, J., Chaboche, J. L., Lian, J., Di, Y., Wu, B., Novokshanov, D., Vajragupta, N., Kucharczyk, P., Brinnel, V., Döbereiner, B., Münstermann, S., Neilsen, M. K., Dion, K., Karlson, K. N., Foulk, J. W., Brown, A. A., Veilleux, M. G., Bignell, J. L., Sanborn, S. E., Jones, C. A., Mattie, P. D., Pack, K., Wierzbicki, T., Chi, S. W., Lin, S. P., Mahdavi, A. & Predan, J., 1 Mar 2016, In : International Journal of Fracture. 198, 1-2, p. 5-100 96 p.

    Research output: Contribution to journalArticle

  50. Published

    Influence of microstructural features on the propagation of microstructurally short fatigue cracks in structural steels

    Sharaf, M., Lian, J., Vajragupta, N., Münstermann, S., Bleck, W., Schmaling, B., Ma, A. & Hartmaier, A., 1 Jan 2016, Fatigue of Materials II: Advances and Emergences in Understanding. Springer International Publishing Switzerland, p. 243-250 8 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  51. 2015
  52. Published

    A new model for upper shelf impact toughness assessment with a computationally efficient parameter identification algorithm

    Novokshanov, D., Döbereiner, B., Sharaf, M., Münstermann, S. & Lian, J., 1 Nov 2015, In : Engineering Fracture Mechanics. 148, p. 281-303 23 p.

    Research output: Contribution to journalArticle

  53. Published

    A comparative study on the formability prediction of steel sheets by anisotropic models based on associated flow rule and non-associated flow rule

    Lian, J., Ahn, D. C., Chae, D. C., Münstermann, S. & Bleck, W., 1 Jan 2015, Key Engineering Materials. Trans Tech Publications Ltd., p. 150-155 6 p. (Key Engineering Materials; vol. 651-653).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  54. Published

    Cold formability of automotive sheet metals: Anisotropy, localization, damage and ductile fracture

    Lian, J., Ahn, D. C., Chae, D. C., Münstermann, S. & Bleck, W., 1 Jan 2015, Sheet Metal 2015. Trans Tech Publications Ltd., p. 353-360 8 p. (Key Engineering Materials; vol. 639).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Evaluation of the cold formability of high-strength low-alloy steel plates with the modified Bai-Wierzbicki damage model

    Lian, J., Wu, J. & Münstermann, S., 1 Jan 2015, In : International Journal of Damage Mechanics. 24, 3, p. 383-417 35 p.

    Research output: Contribution to journalArticle

Previous 1 2 Next

ID: 27180293