1977 …2018

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2018

General analytical sensitivity analysis of composite laminated plates and shells for classical and first-order shear deformation theories

Liu, Q. & Paavola, J., Jan 2018, In : Composite Structures. 183, 1, p. 21-34 14 p.

Research output: Contribution to journalArticleScientificpeer-review

Ultimate strength of a beam-to-column joint in a composite slim floor frame

Zeng, J., Lu, W. & Paavola, J., 2018, In : Journal of Constructional Steel Research. 140, p. 82-91 10 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
2 Citations (Scopus)
82 Downloads (Pure)
2017

Buckling of centrosymmetric anisotropic beam structures within strain gradient elasticity

Tahaei Yaghoubi, S., Mousavi, S. M. & Paavola, J., 15 Mar 2017, In : International Journal of Solids and Structures. 109, p. 84–92

Research output: Contribution to journalArticleScientificpeer-review

15 Citations (Scopus)

Size effects on centrosymmetric anisotropic shear deformable beam structures

Tahaei Yaghoubi, S., Mousavi, S. M. & Paavola, J., 1 May 2017, In : ZAMM: ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK. 97, 5, p. 586-601 16 p.

Research output: Contribution to journalArticleScientificpeer-review

5 Citations (Scopus)
2016

Knowledge Management Framework to Enable Effective Curriculum Development and Self-Determined Learning

Kuo, V., Auvinen, T., Hartikainen, J. & Paavola, J., 2016, Conference Proceeding: New Perspectives in Science Education, 5th Conference Edition, Florence, Italy, 17-18 March 2016. P. (ed.). Italy, p. 46-51

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Shape and cross-section optimization of plane trusses subjected to earthquake excitation using gradient and Hessian matrix calculations

Liu, Q., Paavola, J. & Zhang, J., 2016, In : Mechanics of Advanced Materials and Structures. 23, 2, p. 156-169

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)
2015

Analysis of a cracked concrete containing an inclusion with inhomogeneously imperfect interface

Mousavi, S. M. & Paavola, J., 2015, In : MECHANICS RESEARCH COMMUNICATIONS. 63, January, p. 1-5

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

An Optimization Procedure for Seismic Design of Steel Frames for Multi-Performance and Multi-Hazard Levels

Liu, Q. & Paavola, J., 2015, In : ADVANCES IN STRUCTURAL ENGINEERING. 18, 1, p. 59-74

Research output: Contribution to journalArticleScientificpeer-review

3 Citations (Scopus)

Drift reliability-based optimization method of frames subjected to stochastic earthquake ground motion

Liu, Q. & Paavola, J., Feb 2015, In : Applied Mathematical Modelling. 39, p. 982-999 18 p., 3-4.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Dynamic analysis of higher-order shear deformable beams within gradient elasticity

Tahaei Yaghoubi, S., Mousavi, S. M. & Paavola, J., 2015, XII Finnish Mechanics Days - XII Suomen mekaniikkapäivät, Tampere, 4-5.6.2015. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Helsinki: Rakenteiden mekaniikan seura ry - Finnish Association for Structural Mechanics, p. 148-153

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Lightweight design of composite laminated structures with frequency constraint

Liu, Q. & Paavola, J., 2015, In : Composite Structures. 25 December 2015, p. 1-1

Research output: Contribution to journalArticleScientificpeer-review

18 Citations (Scopus)

Nonsingular fracture mechanics within generalized continua

Mousavi, S. M. & Paavola, J., 2015, XII Finnish Mechanics Days - Suomen XII Mekaniikkapäivät, Tampere 4-5.6.2015. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Helsinki: Rakenteiden mekaniikan seura ry - Finnish Association for Structural Mechanics, p. 42-44 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

On kinematically inadmissible virtual displacements

Paavola, J. & Salonen, E-M., 2015, XII Finnish Mechanics Days - XII Suomen mekaniikkapäivät, Tampere, 4-5.6.2015. Kouhia, R., Mäkinen, J., Pajunen, S. & Saksala, T. (eds.). Helsinki: Rakenteiden mekaniikan seura ry - Finnish Association for Structural Mechanics, p. 100-105

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Performance-based seismic optimization design

Liu, Q. & Paavola, J., 2015, In : Rakenteiden mekaniikka. 48, 1, p. 1-17

Research output: Contribution to journalArticleScientificpeer-review

Pitääkö virtuaalisten siirtymien olla infinitesimaalisia?

Paavola, J. & Salonen, E-M., 2015, In : Rakenteiden mekaniikka. 48, 4, p. 181-198

Research output: Contribution to journalArticleScientificpeer-review

Strain and velocity gradient theory for higher-order shear deformable beams

Tahaei Yaghoubi, S., Mousavi, S. M. & Paavola, J., 2015, In : ARCHIVE OF APPLIED MECHANICS. 85, 7, p. 877-892

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Variational approach to dynamic analysis of third-order shear deformable plates within gradient elasticity

Mousavi, S. M., Paavola, J. & Reddy, J. N., 2015, In : MECCANICA. 50, 6, p. 1537-1550

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)
2014

Analysis of functionally graded magneto-electro-elastic layer with multiple cracks

Mousavi, S. M. & Paavola, J., 2014, In : Theoretical and Applied Fracture Mechanics. 66, August 2013, p. 1-8

Research output: Contribution to journalArticleScientificpeer-review

20 Citations (Scopus)

Analysis of plate in second strain gradient elasticity

Mousavi, S. M. & Paavola, J., 2014, In : ARCHIVE OF APPLIED MECHANICS. 84, 8 August, p. 1135-1143

Research output: Contribution to journalArticleScientificpeer-review

22 Citations (Scopus)

Cracks in strain gradient elasticity: distributed dislocation technique

Mousavi, S. M., Paavola, J. & Baroudi, D., Jun 2014, In : Procedia Materials Science. 3, Special issue, p. 77-82 6 p.

Research output: Contribution to journalArticleScientificpeer-review

Open Access
File
154 Downloads (Pure)

Distributed non-singular dislocation technique for cracks in strain gradient elasticity

Mousavi, S. M., Paavola, J. & Baroudi, D., 2014, In : JOURNAL OF MECHANICAL BEHAVIOR OF MATERIALS. 23, 3-4, p. 47-58

Research output: Contribution to journalArticleScientificpeer-review

Sensitivity and Hessian matrix analysis of structural reliability for uniformly modulated random seismic response

Liu, Q. & Paavola, J., Dec 2014, In : MECHANICS RESEARCH COMMUNICATIONS. 62, p. 155-161 7 p.

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

STOPS: A Graph-Based Study Planning and Curriculum Development Tool

Auvinen, T., Paavola, J. & Hartikainen, J., 2014, The 14th Koli Calling International Conference on Computing Education Research, 20-23 November 2014, Koli, Finland. ACM, p. 25-34

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

8 Citations (Scopus)

Structural reliability and sensitivity analysis for nonstationary random seismic responses

Liu, Q. & Paavola, J., 2014, ISMA 2014 & USD 2014 Conferences, Leuven, Belgium, 15-19 September 2014. p. 4579-4594

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2013

Analysis of cracked functionally graded pienzoelectric strip

Mousavi, S. M. & Paavola, J., 2013, In : International Journal of Solids and Structures. 50, 14-15, p. 2449-2456

Research output: Contribution to journalArticleScientificpeer-review

24 Citations (Scopus)

Distributed Dislocation Technique in Fracture Mechanics: Generalized Continuum Mechanics

Mousavi Seyed, M., Paavola, J. & Baroudi, D., 2013, Aalto Research Day, Otaniemi, Espoo 26.9.2013. Aalto ARTS Books, p. 65-66 (Aalto University publication series CROSSOVER; vol. 2013, no. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

Elsastodynamic Antiplane Analysis of Cracked Graded Piezoelectric Layer via DDT

Mousavi, S. M. & Paavola, J., 2013, The Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, CFRAC 2013, Prague, Czech Republic, 5-7 June 2013.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2012

Saint-Venant's torsion in intrinsic coordinates

Aalto, J., Paavola, J. & Salonen, E-M., 2012, In : Rakenteiden mekaniikka. 45, 3, p. 133-151

Research output: Contribution to journalArticleScientificpeer-review

Screw dislocation in functionally graded layers with arbitrary gradation

Mousavi, S. M., Fariborz, S. J. & Paavola, J., 2012, In : Rakenteiden mekaniikka. 45, 3, p. 125-132

Research output: Contribution to journalArticleScientificpeer-review

Software for Target-Oriented Personal Syllabus - STOPS

Paavola, J., Auvinen, T. & Hartikainen, J., 2012, AECEF Symposium, London 13-14.9.2012. AECEF, p. 8

Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

2011

How to Work with Curved Structures: Applications

Paavola, J. & Salonen, E-M., 2011, First EUCEET Association Conference on New Trends and Challenges in Civil Engineering Education, Patras, Creece, 24-25. November 2011. Dritsos, S. E. (ed.). EUCEET Association European Civil Engineering Education and Training; University of Patras, Department of Civil Engineering, p. 10

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

How to Work with Curved Structures: Theory

Paavola, J. & Salonen, E-M., 2011, 1st EUCEET Association Conference New Trends and Challenges in Civil Engineering Education, Patras, Creece 24-25 November 2011. EUCEET Association European Civil Engineering Education and Training; University of Patras, Department of Civil Engineering, p. 10

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2010

A note on traction and displacement boundary conditions

Paavola, J. & Salonen, E-M., 2010, In : Rakenteiden mekaniikka. 43, 2, p. 127-128

Research output: Contribution to journalArticleScientificpeer-review

Appendix 2: National 'State of the Art' Reports: 3 National Report for Finland

Paavola, J. & Jutila, A., 2010, Inquiries into European Higher Education in Civil Engineering; European Civil Engineering Education and Training; Lifelong Learning - Erasmus Thematic Network Project: Eighth EUCEET Volume. Manoliu, I. (ed.). idp France: CONSPRESS, p. 221-225

Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

2009

Korvikeleikkausvoimasta

Paavola, J. & Salonen, E-M., 2009, Proceedings of the 10th Finnish Mechanics Days X Suomen Mekaniikkapäivät, Jyväskylän yliopisto 3-4.12.2009. p. 278-285

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Mathematical modelling of curved structures

Paavola, J. & Salonen, E-M., 2009, ICTMA 14; 14th International Conference on the Teaching of Mathematical Modelling and Applications, University of Hamburg, Hamburg, Germany, 27-31 July 2009. Saksa: University of Hamburg, p. 1

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2008

Osittaisintegroinnista

Salonen, E-M., Freund, J. & Paavola, J., 2008, In : Rakenteiden mekaniikka. 41, 4, p. 1-32

Research output: Contribution to journalArticleScientificpeer-review

Teaching the modelling of structures

Paavola, J. & Salonen, E-M., 2008, ICTAM 2008 Adelaide. XXII International Congress on Theoretical and applied Mechanics. Denier, J., Finn, M. & Mattner, T. (eds.). Adelaide, Australia, p. 368

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2006

Buckling analysis through equilibrium equations of curved structures

Paavola, J. & Salonen, E-M., 2006, IX Suomen Mekaniikkapäivät, Lappeenranta, 13.-14.6.2006. von Hertzen, R. & Halme, T. (eds.). Lappeenranta, p. 582-590

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Vectors and tensors with matrix manipulations

Freund, J., Paavola, J. & Salonen, E-M., 2005, 18th Nordic Seminar on Computational Mechanics, Silja Serenade, 27-30 October, 2005. Espoo 2005. Paavola, J. & Freund, J. (eds.). p. 125-128

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Vectors and tensors with matrix manipulations

Freund, J., Paavola, J. & Salonen, E-M., 2005, In : Journal of Structural Mechanics. 38, p. 125-128

Research output: Contribution to journalArticleScientificpeer-review

Virtual Work, Lagrange’s Equations and Finite Elements

Paavola, J., Freund, J. & Salonen, E-M., 2005, 18th Nordic Seminar on Computational Mechanics, Silja Serenade, 27-30 October, 2005. Paavola, J. & Freund, J. (eds.). Espoo: TKK, Rakenteiden mekaniikan laboratorio, p. 129-132

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2004

Coping with Curvilinear Coordinates in Fluid Mechanics

Paavola, J. & Salonen, E-M., Jan 2004, In : International Journal of Mechanical Engineering Education. 32, 1, p. 11-17 7 p.

Research output: Contribution to journalArticleScientificpeer-review

Coping with curvilinear coordinates in solid mechanics

Paavola, J. & Salonen, E-M., 2004, In : International Journal of Mechanical Engineering Education. 32, 1, p. 1-10

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Fundamental equations for non-linear analysis in curvilinear co-ordinates with basic mathematics only

Paavola, J. & Salonen, E-M., 2004, Advanced Numerical Analysis of Solids and Structures and Beyond, Graz, Austria 12.-13.8.2004. Holzapfel, G. A., Moser, W. & Reichard, G. (eds.). Graz, Austria: Austria University of Technology, p. 137-153

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2002

Strain and Stress Analysis of a Shell with Variable Thickness

Valjento, P. & Paavola, J., 2002, WCCM V - Fifth World Congress on Computational Mechanics, Vienna, Austria, July 7-12, 2002. Mang, H. A., Rammerstorfer, F. G. & Eberhardsteiner, J. (eds.). Austria: Vienna University of Technology, p. 8

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

2001

Rakenteiden mekaniikan kehitysnäkymiä ja käyttösovelluksia

Mikkola, M. & Paavola, J., 2001, In : Rakennustekniikka. 5, p. 6-9

Research output: Contribution to journalArticleProfessional

2000

Keraamisen tuotteen deformoituminen polttoprosessin aikana

Hassinen, P., Paavola, J., Valjento, P., Hytönen, P., Mannonen, R. & Ranta, R., 2000, VII Suomen mekaniikkapäivät, Tampere, 25-26.5.2000. Koski, J. & Virtanen, S. (eds.). Tampere: Tampereen teknillinen korkeakoulu, Teknillinen mekaniikka, p. 599-608

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Suunnat separoivaan siirtymäyritteeseen perustuva ohutseinämäisten kannattajien laskentamenetelmä

Perttola, H. & Paavola, J., 2000, VII Suomen mekaniikkapäivät, Tampere, 25-26.5.2000. Koski, J. & Virtanen, S. (eds.). Tampere: Tampereen teknillinen korkeakoulu, Teknillinen mekaniikka, p. 541-554

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review