• Vuorimiehentie 1,02150,Espoo

19932018

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Article

Behaviour of reinforcement fibres in TMP-based paper

Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 2002, In : Paperi ja Puu. 84, 5, p. 176-181

Research output: Contribution to journalArticleScientificpeer-review

6 Citations (Scopus)

Comparison of Abaca and Spruce as Reinforcement Fibre

Yu, Y., Kettunen, H., Hiltunen, E. & Niskanen, K., 2000, In : APPITA Journal. 53, 4, p. 287-291

Research output: Contribution to journalArticleScientificpeer-review

12 Citations (Scopus)

Comparison of plate and conical fillings in refining of bleached softwood and hardwood pulps

Koskenhely, K., Nieminen, K., Hiltunen, E. & Paulapuro, H., 2005, In : PAPERI JA PUU-PAPER AND TIMBER. 87, 7, p. 458-463 6 p.

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Comparison of the effects of wet straining and refining on the fracture properties of paper

Zhang, G., Hiltunen, E., Laine, J. E., Paulapuro, H., Kettunen, H. & Niskanen, K., 2002, In : Nordic Pulp & Paper Research Journal. 17, 1, p. 45-49

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Construction of a single bar refiner

Rantanen, J., Hiltunen, E., Nieminen, K., Kerekes, R. & Paulapuro, H., 2011, In : TAPPI Journal. 10, 7, p. 45-51

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Contruction of a single bar refiner

Rantanen, J., Hiltunen, E., Nieminen, K., Kerekes, R. & Paulapuro, H., 2011, In : TAPPI Journal. 10, 7, p. 45-51

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Determining the degree of heat treatment of wood by light polarization technique

Soetedjo, H., Niskanen, I., Rautkari, L., Altgen, M., Hiltunen, E., Thungström, G., Zakrisson, D. & Räty, J., 1 Jul 2018, In : European Journal of Wood and Wood Products. 76, 4, p. 1359-1362 4 p.

Research output: Contribution to journalArticleScientificpeer-review

1 Citation (Scopus)

Effect of long-fibred reinforcement pulp on mechanical properties of short fibred-based paper

Hiltunen, E. & Paulapuro, H., 2011, In : O Papel. 72, 8, p. 42-48

Research output: Contribution to journalArticleScientificpeer-review

2 Citations (Scopus)

Effect of Softwood Kraft Refining on a Mechanical-Chemical Mixture Sheet

Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 2000, In : TAPPI Journal. 83, 10, p. 67

Research output: Contribution to journalArticleScientificpeer-review

9 Citations (Scopus)

Effect on press drying on sheet properties of high-temperature thermomechanical pulp (HTMP)

Pynnönen, T., Paltakari, J., Hiltunen, E., Laine, J. E. & Paulapuro, H., 2002, In : APPITA Journal. 3, p. 220-223

Research output: Contribution to journalArticleScientificpeer-review

Effects of impregnation time on hardwood kraft pulp characteristics and papermaking potential - a mill study

Tolonen, L., Hiltunen, E., Helttunen, J. & Sixta, H., 2010, In : TAPPI Journal. 9, 4, p. 21-27

Research output: Contribution to journalArticleScientificpeer-review

7 Citations (Scopus)

Effects of softwood kraft pulp refining on fracture behaviour of TMP based paper

Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 2002, In : Paper technology. 43, 7, p. 35-39

Research output: Contribution to journalArticleProfessional

Geometrical and spatial effects on fiber network connectivity

Karakoç, A., Hiltunen, E. & Paltakari, J., 15 May 2017, In : Composite Structures. 168, p. 335-344 10 p.

Research output: Contribution to journalArticleScientificpeer-review

13 Citations (Scopus)

Good bonding for low-energy HT-CTMP by press drying

Pynnönen, T., Paltakari, J., Hiltunen, E. & Paulapuro, H., 2004, In : Pulp & Paper Canada. 105, 3, p. pp. T57-T61

Research output: Contribution to journalArticleScientificpeer-review

4 Citations (Scopus)

Inter-fiber bonding effect of beating, starch or filler

Tanaka, A., Hiltunen, E. & Niskanen, K., 2001, In : Nordic Pulp and Paper Research Journal. 16, 4, p. 306-312

Research output: Contribution to journalArticleScientificpeer-review

Paper Technical Potential of Spruce SO2-Ethanol-Water (SEW) Pulp Compared to Kraft Pulp

Iakovlev, M., Hiltunen, E. & van Heiningen, A., 2010, In : Nordic Pulp and Paper Research Journal. 25, 4, p. 428-433

Research output: Contribution to journalArticleScientificpeer-review

11 Citations (Scopus)

Products from a larch biorefinery: Semi-bleached paper and fermentation products

Hörhammer, H., Berezina, O., Hiltunen, E., Granström, T. & van Heiningen, A., 2012, In : TAPPI Journal. 11, 10, p. 31-39

Research output: Contribution to journalArticleScientificpeer-review

TMP long fibres as reinforcement pulp.Part 1.Laboratory tests

Lehto, J., Hiltunen, E. & Paulapuro, H., 2010, In : Nordic Pulp and Paper Research Journal. 25, 3, p. 328-339

Research output: Contribution to journalArticleScientificpeer-review

TMP long fibres as reinforcement pulp. Part 2. Pilot tests

Lehto, J., Hiltunen, E. & Paulapuro, H., 2010, In : Nordic Pulp and Paper Research Journal. 25, 3, p. 340-350

Research output: Contribution to journalArticleScientificpeer-review

Verhornung von Zellstoff und Massnahmen zu ihrer Reversion

Weise, U., Hiltunen, E. & Paulapuro, H., 1998, In : Das Papier. 52, 10A, p. p. V14-V19

Research output: Contribution to journalArticleScientificpeer-review

Chapter

Cellulosic Fiber Reinforced Polymer Composites and Nanocomposites: Potential Use of Micro- and Nanofibrillated Cellulose Composites Exemplified by Paper (Chapter 5 Part II)

Subramanian, R., Hiltunen, E. & Gane, P. A. C., 2011, Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology. Kalia, S., Kaith, B. S. & Kaur, I. (eds.). Saksa, p. 750

Research output: Chapter in Book/Report/Conference proceedingChapterScientific

Päällystetyn hylyn vaikutusmekanismit

Hiltunen, E., 1994, AEL-INSKO P903701/94, Paperinvalmistuksen kemia, Vantaa 29.-30.11.1994. AEL-INSKO

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Päällystetyn hylyn vaikutusmekanismit

Hiltunen, E., 1995, Paperinvalmistuksen kemia. Vantaa: INSKO, p. s. IV 1-28

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Papermaking properties of pulp

Hiltunen, E., 1999, Papermaking Science and Technology.Book 17.Pulp and Paper Testing. Gullichsen, J. & Paulapuro, H. (eds.). Jyväskylä: Fapet Oy, p. 38-63

Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

Conference contribution

A fiber network model for composite reinforcements and nonwoven materials

Karakoç, A., Hiltunen, E. & Paltakari, J., 2015, The 10th Biennial Johan Gullichsen Colloquium, Helsinki/FINLAND and November 19, 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

A stochastic micromechanical model for fiber network deformation

Karakoç, A., Paltakari, J. & Hiltunen, E., 2015, 4th International Conference on Material Modeling, Berkeley, California, USA May 27-29, 2015. p. 73

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

6 Citations (Scopus)

Comparison of abaca and spruce as reinforcement fiber

Yu, Y., Kettunen, H., Hiltunen, E. & Niskanen, K., 1999, 1999 TAPPI International Paper Physics Conference, USA, Sep. 26­30, 1999. San Diego, USA: TAPPI, p. 161

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of fibre charge on refining of softwood kraft pulp

Hiltunen, E., Laine, J. E. & Paulapuro, H., 1999, 5th PTS Symposium Pulp Technology, Dresden, Germany, April 14-15, 1999. Blechschmidt, J. & Fiehn, G. (eds.). München: PTS, p. 19

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of long-fibred refinforcement pulp on mechanical properties of short fibre-based paper

Hiltunen, E. & Paulapuro, H., 2010, XXI TECHNICELPA Conference and Exhibition, Lissabon, Portugali, 12-15.10.2010. Lissabon: TECHNICELPA - Associacao Portuguesa dos Tecnicos da Industrias de Celilose e Papel, p. 87

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of softwood kraft pulp refining on fracture behaviour of TMP-based paper

Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 2001, Improving Paper Machine Runnability, Göteborg, Ruotsi, 22.-23.1.2001. Leatherhead, Englanti: Pira International, p. 1

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of softwood kraft refining on a mechanical-chemical mixture sheet

Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 1999, TAPPI 99 Papermakers Conference, Atlanta, Georgia, USA, March 1­4, 1999. Atlanta, Georgia, USA: TAPPI Press, p. Vol. 2, p. 741­749

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect of Wet Straining on Fracture Properties of Paper in Comparison to Refining

Zhang, G., Hiltunen, E., Kettunen, H., Niskanen, K. J., Laine, J. E. & Paulapuro, H., 2000, IDS 2000, Holland, Aug. 28-31, 2000. Kerkhof, P. J. A. M., Coumans, W. J. & Mooiweer, G. D. (eds.). The Netherlands: IDS2000 organizing Committee, p. 1-9

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Effect on press drying on sheet properties of high-temperature thermomechanical pulp (HTMP)

Pynnönen, T., Paltakari, J., Hiltunen, E., Laine, J. E. & Paulapuro, H., 2001, 55th Appita Annual Conference, Hobart, Australia, 30.4.-2.5.2001. Appita, p. 203-206

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Energy Efficient Refining

Hiltunen, E., 2008, Cost Strategic Workshop, 9-11 June 2008, Amsterdam, Hollanti. Broers, I. (ed.). Centre of Competence Paper and Board (KCPK), Hollanti

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Fracture mechanism in inter-fiber bond failure - Microscopic observations

Kang, T., Paulapuro, H. & Hiltunen, E., 2003, 57th Appita Annual Conference, Melbourne, Australia, 2003. p. 309-314

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Fracture properties in filled papers

Tanaka, A., Hiltunen, E., Kettunen, H. & Niskanen, K., 2001, The Science of Papermaking, 12th Fundamental Research Symposium, Oxford, Englanti, 17.-21.9.2001. Baker, C. F. (ed.). Frecheville Court, Bury, Englanti: The Pulp & Paper Fundamental Research Society, p. s. Vol 2, 1403-1421

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Good Bonding for Low-Energy HT-CTMP by press drying

Pynnönen, T., Hiltunen, E., Paltakari, J., Laine, J. E. & Paulapuro, H., 2003, 89th Annual Meeting of the Pulp and Paper Technical Association of Canada (PAPTAC), Montreal, Kanada, 27-30.1.2003. Pulp and Paper Technical Association of Canada

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

4 Citations (Scopus)

New refiner fillings and refiner techniques for treating the fibre microstructure in a controlled way

Koskenhely, K., Nieminen, K., Hiltunen, E. & Paulapuro, H., 2004, International Papermaking and Environmental Conference, Tianjin, Kiina, 2003. Tianjin University of Science and technology, China technical accosiation of paper industry, Tianjin technical accosiation of paper industry

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Reinforcement fibre behaiour in TMP-based paper

Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 2001, DITP 27th International Annual Symposium, Bledm Slovenia, 15.-17.9.2000. Ljubjana, Slovenia: DITP, Slovenia, p. 115-119

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

The effect of polyelectrolyte adsorption on the strength properties of paper made from mixtures of mechanical and chemical pulps

Koljonen, K., Vainio, A., Hiltunen, E., Laine, J. & Stenius, P., 2003, 5th International Paper and Coating Chemistry Symposium 2003, Montreal, Canada, June 16-19, 2003. Theo van de Ven, M. U. & Robert Pelton, M. U. (eds.). Kanada: Pulp and Paper Technical Association of Canada (PAPTAC) and Pulp and Paper Research Institute of Canada (PAPRICAN), p. 223-227

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

11 Citations (Scopus)

The effect of refining chemical softwood pulp on the strength properties of a sheet made from a mixture of mechanical and chemical pulp

Hiltunen, E., Laine, J. E. & Zhang, G., 1998, 52nd Appita Annual General Conference, Brisbane, Australia, 11.-14.5.1998. Appita Inc., p. 239-245

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

8 Citations (Scopus)

The role of compressive and abrasive refining on fibre and paper structure

Hiltunen, E., Setasith, S. & Paltakari, J., 2015, INPAP 2015, Gniew, Puola, 23-25.9.2015.

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

Web addition of filler

Subramanian, R., Hiltunen, E. & Paulapuro, H., 2003, 6th International Conference on Pulp & Paper Industry, New Delhi, India, 5-7 December, 2003. A. Panda, D. (ed.). New Delhi: Inpaper International and Tafcon, p. 381-341

Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Working paper

Paperitekniikan laboratorion koepaperikoneen soveltuvuus märkäosan tutkimukseen

Hiltunen, E., 1993, Otaniemi, (Laboratory of Paper Technology, Reports, Series C; no. 3).

Research output: Working paperProfessional

Turbidity as a measure of the specific surface of fibres and fines

Jokinen, M., Saharinen, E., Luukko, K., Hiltunen, E. & Paulapuro, H., 2003, p. 381, (28th EUCEPA conference, Lissabon, 2-4.4.2003).

Research output: Working paperProfessional