Antti Korhonen

Research outputs

  1. 2013
  2. Published

    On the work-hardening of AA 3104 aluminum alloy

    Korhonen, A. S., 2013, In : Journal of Materials Engineering and Performance. 22, 2, p. 505-511

    Research output: Contribution to journalArticleScientificpeer-review

  3. 2012
  4. Published

    Ohutlevyjen muovattavuuden perusteet, Oulun yliopiston oppimateriaalia

    Korhonen, A. & Larkiola, J., 2012, Oulu, p. 203.

    Research output: Working paperProfessional

  5. Published

    The Influence of Austenite Stability on Latge-strain Kinematic Hardening of Austenitic Stainless Steel steel research international

    Manninen, T., Myllykoski, P. & Korhonen, A., 2012, In : Steel Research International. special edition, p. 931-934

    Research output: Contribution to journalArticleScientificpeer-review

  6. 2011
  7. Published

    Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels

    Korhonen, A., Manninen, T. & Larkiola, J., 2011, XVIII Conference on Computer Methods in Materials Science, January 16-19, 2011, Zakopane, Poland..

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  8. Published

    Forming and fracture limits of aluminum alloy

    Korhonen, A. & Heikinheimo, E., 2011, 60th CIRP General Assembly, Pisa, Italy, August, 2011. p. 8

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  9. Published

    Forming and fracture limits of aluminum alloy

    Korhonen, A. & Heikinheimo, E., 2011, In : Materials Science and Technology. 27, 11, p. 1694-1700

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Forming and Fracture Limits of Two Metastable High-strength Austenitic Stainless Steels

    Korhonen, A., Manninen, T. & Larkiola, J., 2011, In : Steel Research International. Special issue, p. 1084-1089

    Research output: Contribution to journalArticleScientificpeer-review

  11. 2010
  12. Published

    Comparison of forming and fracture limits of cold rolled high-strength austenitic stainless steels

    Korhonen, A., Manninen, T. & Larkiola, J., 2010, IDDRG, 50th Anniversary Conference, Graz, Austria, May 31 June 2, 2010. Kolleck, R. (ed.). Graz: Graz University of Technology, p. 535-544

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  13. Published

    Forming and fracture limits of an aluminum alloy

    Korhonen, A., Heikinheimo, E. & Koivunen, P., 2010, Plasticity 2010,St. Kitts, January 3-8, 2010. Akhtar, S. (ed.). NEAT Press

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  14. 2009
  15. Published

    Comparison of forming and fracture limits of an aluminum alloy and austenitic stainless steel

    Korhonen, A., Manninen, T., Yoon, J-W. & Larkiola, J., 2009, The 12th ESAFORM Conference on Material Forming, Twente, the Netherlands on April 2009. p. 4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  16. Published

    Comparsion of Forming and Fracture Limits of an Aluminum Alloy and Austenitic Stainless Steel

    Korhonen, A., Manninen, T., Yoon, J-W. & Larkiola, J., 2009, The 12th ESAFORM Conference on Material Forming, Twente, the Netherlands on April 2009. p. 0

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Published

    Large-Strain Bauschinger Effect in Austenitic Stainless Steel Sheet,

    Manninen, T., Myllykoski, P., Taulavuori, T. & Korhonen, A., 2009, ICPNS '2007, Zhengzhou, China. p. 333-336

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Published

    On the forming and fracture limits of sheet metals

    Korhonen, A., Manninen, T. & Yoon, J-W., 2009, the XVI Conference on Computer Methods in Materials Technology, Krynica-Zdrój, Poland, 11.-14. 1.2009. p. 143-147

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. 2008
  20. Published

    Forming and fracture criteria for austenitic stainless steel sheets

    Korhonen, A. & Manninen, T., 2008, Proc. of the 7th Int. Conf. and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Interlaken, Switzerland, p. 311-314

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. Published

    Forming and fracture limits of austenitic stainless steel sheet

    Korhonen, A. & Manninen, T., 2008, In : Plasticity. p. 3

    Research output: Contribution to journalArticleProfessional

  22. Published

    Forming and fracture limits of austenitic stainless steel sheet

    Korhonen, A. & Manninen, T., 2008, MEFORM 2008, Internationale Tagung zur Simulation von Umformprozessen. 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  23. Published

    Forming and fracture limits of austenitic stainless steel sheets

    Korhonen, A. & Manninen, T., 2008, In : MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 488, 1-2, p. 157-166

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Large-strain baushinger effect in AISI 301LN austenitic stainless steel sheet

    Manninen, T., Taulavuori, T., Myllykoski, P. & Korhonen, A., 2008, The 9th International Conference on Technology of Plasticity (ICTP 2008). Vol. 9. p. 2318-2323 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  25. Published

    Severe Plastic Deformation (SPD) Processes for Metals

    Azushima, A., Kopp, R., Korhonen, A., Yang, D. Y., Micari, F., Lahoti, G. D., Groche, P., Yanagimoto, J., Tsuji, N., Rosochowski, A. & 1 othersYanagida, A., 2008, 58th CIRP General Assembly, Manchester, United Kingdom, 24.-30.8.2008. p. 716-735

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  26. 2007
  27. Published

    Comparison of two commercial FE codes for sheet metal forming

    Revuelta, A., Kanervo, K., Myllykoski, P., Larkiola, J. & Korhonen, A. S., 2007, Materials Processing and Design: Modeling, Simulation and Applications, 9th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM'07, Porto, Portugal, 17-21 June 2007. M. A. Cesar de Sa, J. & D. Santos, A. (eds.). New York: AMERICAN INSTITUTE OF PHYSICS, p. 625

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  28. Published

    Plastic deformation of solderless press-fit connectors

    Manninen, T., Kanervo, K., Revuelta, A., Larkiola, J. & Korhonen, A. S., 2007, In : MATERIALS SCIENCE AND ENGINEERING A: STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 460-461, p. 633-637

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2006
  30. Published

    Hardening models for austenitic stainless steels

    Kanervo, K., Manninen, T. & Korhonen, A. S., 2006, 12th International symposium on plasticity and its current applications, PLASTICITY'06, Halifax, Canada, 17-22 Jun 2006. Khan, A. S., Kazmi, R., Baig, M., Farrokh, B. & Pandey, A. (eds.). Fulton, Maryland, USA: NEAT Press, p. 43-45

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  31. Published

    On formability and forming limits of austenitic stainless steels

    Kanervo, K., Manninen, T., Larkiola, J. & Korhonen, A. S., 2006, 9th International Conference on Material Forming, ESAFORM 2006, Glasgow, Scotland, April 2628, 2006. Juster, N. & Rosochowski, A. (eds.). Krakow, Poland: European Scientific Association for Material Forming, ESAFORM; Akapit Publishing House, p. 339342

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  32. 2005
  33. Published

    Flash formation in continuous extrusion

    Manninen, T., Ramsay, P. & Korhonen, A., 2005, The 8th ESAFORM Conference on Material Forming, Cluj-Napoca, Romania, 2005. Banabic, D. (ed.). Bucharest, Romania: Technical University of Cluj-Napoca, p. 557-560

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  34. Published

    Plastic deformation of solderless press-fit connectors

    Manninen, T., Kanervo, K., Revuelta, A., Larkiola, J. & Korhonen, A., 2005, The 8th International Conference on Technology of Plasticity, Verona, Italia, 2005. Bariani, P. (ed.). Verona, Italia: University of Padova, p. pp.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  35. 2003
  36. Published

    Application of forming simulation in the post-buckling analysis of cold-formed stainless steel columns

    Manninen, T., Korhonen, A. S. & Larkiola, J., 2003, Metal Srtuctures - Design, Fabrication, Economy. Jármay, K. & Farkas, J. (eds.). Rotterdam, the Netherlands: Millpress, p. 117-122

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  37. 2002
  38. Published

    Editors Preface

    Seeger, A. & Korhonen, A., 2002, Physica status solidi (a), Applied Research, Proceedings of Seventh International Conference on Ultra-High-Purity Base Metals (UHPM-2000), Helsinki/Stockholm, June 4-8, 2000. Seeger, A. & Korhonen, A. (eds.). WILEY-VHC

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  39. Published

    Modeling and optimization of metal forming processes

    Manninen, T., Larkiola, J., Czer, L., Revuelta, A. & Korhonen, A., 2002, Metal Forming Science and Practice, A State-of-the Art Volume in Honour of Professor J.A.Schey's 80th Birthday. Lenard, J. G. (ed.). Elsevier, p. 193-212

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  40. Published

    Modelling of deep drawing of stainless steel

    Manninen, T., Larkiola, J. & Korhonen, A., 2002, Information Technology, Global Environment and Sheet Metal Forming, Proc. of the 22nd Biennial Congress of the International Deep Drawing Research Group, May 20 - 24, 2002, Nagoya, Japan. p. 43-49

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  41. Published

    Three-dimensional numerical modeling of continuous extrusion

    Manninen, T., Ramsay, P. & Korhonen, A., 2002, Advanced Technology of Plasticity (2002), Vol. 1, Proc. of the 7th International Conference on Technology of Plasticity, Yokohama, October 27 - November 1, 2002. p. 439-444

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  42. 2001
  43. Published

    Data Mining in Metalforming.New Possibility in Tool Life Analysis?

    Cser, L. & Korhonen, A., 2001, Idee Vision Innovation, Festschrift anlässlich des 60.Geburtstags von Professor Manfred Geiger. Vollertsen, F. & Kleiner, M. (eds.). Bamberg: Verlag Meisenbach, p. 109

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  44. 2000
  45. Published

    Deep drawing of double bowl kitchen sinks of stainless steel

    Häkkinen, E., Korhonen, A., Manninen, T., Toivanen, T. & Tarkiainen, R., 2000, 8th International Conf. on Metal Forming, Krakow, Poland, Sept. 3-7, 2000. M. Pietrzyk, J. K. & J. Majta, P. H. (eds.). Rotterdam: A.A.Balkema Publishers, p. 379-384

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  46. Published

    Logistics from IMS towards virtual factory

    Cser, L., Cselenyi, J., Geiger, M., Mäntylä, M. & Korhonen, A. S., 2000, In : Journal of Materials Processing Technology. 103, p. 6-13

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Surface Engineering with Light Alloys - Hard Coatings, Thin Films and Plasma Nitriding

    Korhonen, A. & Harju, E., 2000, In : Journal of Materials Engineering and Performance. 9, 3, p. 302-305

    Research output: Contribution to journalArticleScientificpeer-review

  48. 1999
  49. Published

    Data Mining and State Monitoring in Hot Rolling

    Cser, L., Korhonen, A. S., Gulyas, J., Mäntylä, P., Simula, O., Reiss, G. & Ruha, P., 1999, 2nd International Conference on Intelligent Processing and Manufacturing of Materials, IPMM'99, Honolulu, July 10-15, 1999. Honolulu, p. 529-537

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  50. Published

    Data mining in improving the geometric quality parameters of hot rolled strips

    Cser, L., Korhonen, A. S., Mäntylä, P. & Simula, O., 1999, International Conference on Quality Manufacturing, South Africa, Jan. 13-15, 1999. Katz, Z. & du Preez, N. (eds.). Stellenbosch, Etelä-Afrikka, p. 8-15

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  51. Published

    Formation of a wear resistant non-metallic protective layer on PVD-coated cutting and forming tools

    Harju, E., Kivivuori, S. & Korhonen, A. S., 1999, In : Surface & Coatings Technology. 112, 1-3, p. 98-102

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Metals replacing ceramics in catalytic converters

    Korhonen, A., 1999, International Workshop on Environmentally Conscious Metal Processing, ICEM'99, Nuremberg, Sept. 22-24, 1999. Saksa, p. 1-5

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  53. Published

    Modelling and optimisation of thermomechanical processing of metals

    Myllykoski, P., Larkiola, J., Ahokainen, T., Korhonen, A. & Cser, L., 1999, Advanced Technology of Plasticity. Geiger, M. (ed.). Saksa, p. 1997-2006

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  54. Published

    Notes on the history of iron and steel making and processing

    Korhonen, A., 1999, International Conference on Ultra High Purity Base Metals, Japan, May 31-June 4, 1999. Japani

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  55. Published

    Predicting and modelling flatness with neural networks

    Larkiola, J., Korhonen, A. & Cser, L., 1999, 2nd Esaform conference, Guimaraes, Portugal, 13.-17.4.1999. Covas, J. A. (ed.). Portugal, p. 485-488

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  56. Published

    Process State Monitoring Based on Data Mining in Hot Rolling

    Cser, L., Korhonen, A. S., Simula, O. & Ruha, P., 1999, 6th ICTP, Nuremberg, Sept. 19-24, 1999. Saksa, p. 129-136

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  57. Published

    Structure investigations of wear reducing non-metallic layers on TiN-coated HSS turning tools

    Harju, E., Korhonen, A. S., Adamik, M. & Barna, P. B., 1999, In : Surface & Coatings Technology. 116-119, Sept.,99, p. 498-504

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    Uj modszerek a meleghengerlesi folyamatok elemzeseben es a folyamatkövetesben

    Cser, L., Korhonen, A. S., Gulyas, J., Reiss, G., Myllykoski, P. & Larkiola, J., 1999, 8th Conference on Material, Energy, Environment and Economy in Steel Metallurgy, Unkari, Sept. 9-10. Unkari, p. 37-38

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  59. 1998
  60. Published

    Application of Neural Networks for Modelling of Rolling and Annealing of Steel Strip

    Cser, L., Korhonen, A. S., Larkiola, J., Myllykoski, P. & Simula, O., 1998, CIRP International Seminar on Intelligent Computation in Manufacturing Eng., ICME'98, Capri, July 1-3, 1998. p. 265-272

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  61. Published

    Application of neural networks in analysis of formability and flatness of steel strips

    Myllykoski, P., Larkiola, J. & Korhonen, A. S., 1998, 7th International conference on steel rolling. Tokio: The Iron and Steel Institute of Japan, p. 178-183

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  62. Published

    Application of neural networks in rolling of steel

    Korhonen, A. & Larkiola, J., 1998, IPMM'97, Australasia-Pacific Forum on Intelligent Processing and Manufacturing of Materials, Gold Coast, Australia, 14.-17.7.1997. T. Chandra, S. R. L., J.A. Meech, B. V. & M. Smith, B. B. (eds.). Brisbane, Australia: IPMM'97 Committee, TMS, Japan Soc. for Technol. of Plasticity USAF OSR/AOARD, p. 324-330

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  63. Published

    A Three Dimensional Finite Element Analysis of Hot Forging a Part for the Automotive Industry

    Andersson, K., Katajarinne, T., Kivivuori, S. & Korhonen, A. S., 1998, ICFT'98, Birmingham, 27.-28.4.1998. Suffolk, UK: IMechE Transactions, p. 175-181

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  64. Published

    The role of neural networks in the optimisation of rolling processes

    Larkiola, J., Myllykoski, P., Korhonen, A. & Cser, L., 1998, In : Journal of Materials Processing Technology. 80-81, p. 16-23

    Research output: Contribution to journalArticleScientificpeer-review

  65. 1997
  66. Published

    Effect of work material composition on the cutting performance of PVD TiN-coated tools

    Korhonen, A., 1997, Advanced Metal Science for the 21st Century using High-Quality Vacuum, Osaka, Feb. 4-6,1997. Abiko, K. & Hayashi, C. (eds.). Osaka: Japan Science and Technology Corp., p. 94-113

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

Previous 1 2 3 Next

ID: 68838