School services, ENG

Organisational unit: Department

Research outputs

  1. 2018
  2. Accepted/In press

    Thermal reclamation of foundry sands using repurposed sand dryer equipment

    Sappinen, T., Orkas, J. & Kronqvist, T., 21 Nov 2018, (Accepted/In press) In : Archives of Foundry Engineering.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published
  4. E-pub ahead of print

    Device and method for measuring thickness variation of large roller element bearing rings

    Viitala, R., Viitala, R., Gruber, G., Hemming, B., Widmaier, T., Tammi, K. & Kuosmanen, P., 16 Aug 2018, In : Precision Engineering.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Additive manufacturing validation methods, technology transfer based on case studies

    Flores Ituarte, I., Kretzschmar, N., Chekurov, S., Partanen, J. & Tuomi, J., 3 Aug 2018, Additive Manufacturing - Developments in Training and Education. Springer International Publishing AG, p. 99-112 14 p.

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  6. Published

    Introduction of new decentralised renewable heat supply in an existing district heating system

    Rämä, M. & Wahlroos, M., 1 Jul 2018, In : Energy. 154, p. 68-79 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Environmental justice for the governance of aquatic environments

    Paloniemi, R. , Niemelä, J. , Soininen, N. , Laatikainen, T. , Vierikko, K. , Rekola, A. , Viinikka, A. , Yli-Pelkonen, V. , Assmuth, T. , Kopperoinen, L. & 3 others Peltonen, L., Kuokkanen, T. & Kyttä, M., 4 Mar 2018, In : Local Environment. 23, 3, p. 366-377 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Computational and experimental performance analysis of a novel method for heating of domestic hot water with a ground source heat pump system

    Niemelä, T., Manner, M., Laitinen, A., Sivula, T-M., Jokisalo, J. & Kosonen, R., 15 Feb 2018, In : Energy and Buildings. 161, p. 22-40 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    An Optical Characterization of Dual-Fuel Combustion in a Heavy-Duty Diesel Engine

    Ahmad, Z., Aryal, J., Ranta, O., Kaario, O., Vuorinen, V. & Larmi, M., 1 Jan 2018, In : SAE Technical Papers. 2018-April, 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    The changing uses of cadastral information : a user-driven case study

    Krigsholm, P., Riekkinen, K. & Ståhle, P., 2018, In : Land. 7, 3, 14 p., 83

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Varestraint Weldability Testing of ATI 718Plus (R)-Influence of Eta Phase

    Singh, S., Fransson, W., Andersson, J., Brederholm, A. & Hänninen, H., 2018, PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 & DERIVATIVES: ENERGY, AEROSPACE, AND INDUSTRIAL APPLICATIONS. Ott, E., Liu, Andersson, J., Bi, Z., Bockenstedt, K., Dempster, Groh, J., Heck, K., Jablonski, P., Kaplan, M., Nagahama, D. & Sudbrack, C. (eds.). Springer International Publishing AG, p. 929-937 9 p. (Minerals Metals & Materials Series)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  12. 2017
  13. Published

    Cost-optimal renovation solutions to maximize environmental performance, indoor thermal conditions and productivity of office buildings in cold climate

    Niemelä, T., Levy, C., Kosonen, R. & Jokisalo, J., 1 Jul 2017, In : Sustainable Cities and Society. 32, p. 417-434 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Energy performance and environmental impact analysis of cost-optimal renovation solutions of large panel apartment buildings in Finland

    Niemelä, T., Kosonen, R. & Jokisalo, J., 1 Jul 2017, In : Sustainable Cities and Society. 32, p. 9-30 22 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Cost-effectiveness of energy performance renovation measures in Finnish brick apartment buildings

    Niemelä, T., Kosonen, R. & Jokisalo, J., 15 Feb 2017, In : Energy and Buildings. 137, p. 60-75 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Comparison of energy performance of simulated and measured heat pump systems in existing multi-family residential buildings

    Niemelä, T., Kosonen, R. & Jokisalo, J., 2017, Proceedings of 12th IEA Heat Pump Conference. International energy Agency, 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  17. Accepted/In press

    Introduction of new decentralised renewable heat supply in an existing district heating system

    Rämä, M. & Wahlroos, M., 2017, (Accepted/In press) The 12th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES. Faculty of Mechanical Engineering and Naval Architecture, Zagreb, p. 1-16 16 p. (Book of abstracts : Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  18. Accepted/In press

    Potential for dynamic pricing in district heating systems in Denmark and Finland

    Dominković, D. F., Wahlroos, M., Syri, S. & Pedersen, A. S., 2017, (Accepted/In press) The 12th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES. Faculty of Mechanical Engineering and Naval Architecture, Zagreb, p. 1-14 14 p. (Book of abstracts : Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  19. Published

    PRODUCTIVE COMBINATION OF DIFFERENT TYPES OF PEOPLE IN COLLECTIVE DEVELOPMENT PROJECTS

    Latvala, M. & Singh, V., 2017, Working papers series, Engineering Project Organization Conference. Mahalingam, A., Shealy, T. & Gil, N. (eds.). EPOS, 20 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  20. Published

    Types of people in communal development projects in construction sector: Are they effective together?

    Latvala, M. & Singh, V., 2017, DS 87-8 Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 8: Human Behaviour in Design, Vancouver, Canada, 21-25.08.2017. Maier, A., Skec, S., Kim, H., Kokkolaras, M., Oehmen, J., Fadel, G., Salustri, F. & Van der Loos, M. (eds.). Vol. 8, p. 219-228 10 p. (International Conference on Engineering Design)

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  21. 2016
  22. Published

    Cost-optimal energy performance renovation measures of educational buildings in cold climate

    Niemelä, T., Kosonen, R. & Jokisalo, J., 1 Dec 2016, In : Applied Energy. 183, p. 1005-1020 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Katu- ja tieympäristön uudet mittaus- ja mallinnusmenetelmät

    Vaaja, M. , Hyyppä, H. , Virtanen, J-P. , Hyyppä, J. , Kukko, A. , Kaartinen, H. , Jaakkola, A. , Kurkela, M. , Julin, A. , Ståhle, P. & 1 others Ahlavuo, M., 29 Sep 2016

    Research output: Contribution to conferencePaperProfessional

  24. Published

    Tieympäristön uudet mittaus- ja mallinnusmenetelmät

    Vaaja, M. , Hyyppä, H. , Virtanen, J-P. , Hyyppä, J. , Kukko, A. , Kaartinen, H. , Jaakkola, A. , Kurkela, M. , Julin, A. , Ståhle, P. & 1 others Ahlavuo, M., 7 Sep 2016, Väylät & liikenne esitelmäjulkaisu. Vol. 2016, p. 88-93

    Research output: Chapter in Book/Report/Conference proceedingConference contributionProfessional

  25. Published

    New Possibilities of Measuring Road and Traffic Environments

    Hyyppä, J., Hyyppä, H., Kukko, A., Virtanen, J-P., Kaartinen, H., Vaaja, M., Jaakkola, A., Kurkela, M., Lehtomäki, M. & Ahlavuo, M., 1 Jun 2016

    Research output: Contribution to conferencePaperProfessional

  26. Published

    Uudenlaista, monimittakaavaista 3D-paikkatietoa laserkeilauksella

    Rönnholm, P. , Hyyppä, H. , Haggren, H. , Virtanen, J-P. , Ahlavuo, M. , Ståhle, P. , Kurkela, M. , Vaaja, M. , Kukko, A. , Kaartinen, H. & 2 others Hyyppä, J. & Jaakkola, A., 10 May 2016

    Research output: Contribution to conferencePaperProfessional

  27. Published

    Laserkeilausmenetelmien soveltuvuus jokiympäristöjen mallinnukseen

    Vaaja, M. , Kurkela, M. , Hyyppä, H. , Kukko, A. , Kaartinen, H. , Jaakkola, A. , Kasvi, E. , Lotsari, E. , Virtanen, J-P. , Saarinen, N. & 7 others Ahlavuo, M., Vastaranta, M., Holopainen, M., Jalonen, J., Järvelä, J., Alho, P. & Hyyppä, J., 2016, Digitaalista tulevaisuutta – Huippuosaamisella vaikuttavuutta ja vuorovaikutusta. Ahlavuo, M., Hyyppä, H. & Ylikoski, E. (eds.). p. 139-146 (Humanistinen ammattikorkeakoulu julkaisuja; no. 32)

    Research output: Chapter in Book/Report/Conference proceedingChapterProfessional

  28. 2015
  29. Published

    Heat pumps in energy and cost efficient nearly zero energy buildings in Finland

    Häkämies, S. (ed.), Hirvonen, J., Jokisalo, J., Knuuti, A., Kosonen, R., Niemelä, T., Paiho, S. & Pulakka, S., 2015, Espoo: VTT Technical Research Centre of Finland Ltd. 80 p. (VTT Technology; no. 235)

    Research output: Book/ReportCommissioned reportProfessional

  30. 2014
  31. Published

    Ethical personalisation act 2025

    Hakala, J., Rytkönen, E., Snellman, K., Särkkä, N. & Tien, D. V. B., 2014, Bit Bang 6: Future of Media. Neuvo, Y., Ormala, E. & Kuikka, M. (eds.). Helsinki: Aalto ARTS Books, p. 213-243

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  32. Published

    Graph based representation and analyses for conceptual stages

    Coatanéa, E., Nonsiri, S., Christophe, F. & Mokammel, F., 2014, ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2014. The American Society of Mechanical Engineers (ASME), Vol. 1A, V01AT02A071

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  33. Published

    Power to the people: Media users' capabilities and motivations to influence content production and distribution

    Badham, M., Elischka, S., Lehto, S., Sihvonen, S., Särkkä, N. & Dung, V. B. T., 2014, Bit Bang 6: Future of Media. Neuvo, Y., Ormala, E. & Kuikka, M. (eds.). Espoo: Aalto ARTS Books, p. 11-41

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  34. Published

    Smartwear: Future smart wearables to improve our health and media communications

    Badham, M., Islam, H., Itälä, T., Sihvonen, S. & Wang, S., 2014, Bit Bang 6: Future of Media. Neuvo, Y., Ormala, E. & Kuikka, M. (eds.). Espoo: Aalto ARTS Books, p. 185-211

    Research output: Chapter in Book/Report/Conference proceedingChapterScientific

  35. 2013
  36. Published

    Fitting of Different Drop Size Distribution Functions to Spray Data from a Y-jet Type Airblast Atomizer

    Paloposki, T. & Inamura, T., 2013, ILASS Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems, Chania, Greece, 1-4 September 2013. ILASS - The Institute for Liquid Atomization and Spray Systems

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientific

  37. 2004
  38. Published

    Reduction of organic emissions by using a multistage drying system for wood-based biomasses

    Spets, J-P. & Ahtila, P., Mar 2004, In : Drying Technology. 22, 3, p. 541-561 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  39. 1985
  40. Published

    First year operating experience from Kerava solar village

    Peltola, S. S., Lund, P. D. & Routti, J. T., 1985, In : International Journal of Ambient Energy. 6, 3, p. 117-122 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

ID: 36705