School of Chemical Engineering

Research Output

Filter
Working paper
2006

The effect of raw material hydrothermal treatment on the properties of veneer and veneer-based products

Rohumaa, A., Paajanen, O., Hughes, M. & Kairi, M., 2006, Llandudno, North Wales, UK, p. 1, (Tenth European Panel Products Symposium North Wales Conference Centre, Llandudno, North Wales, UK. 11th, 12th and 13th October 2006).

Research output: Working paperProfessional

The New Approach to Teaching Wood Products Technology

Mauno, A., Vahtikari, K., Lahti, P. & Kairi, M., 2006, (9th Wold Conference on Timber Engineering, Portland, Oregon, USA, 6-10.8.2006).

Research output: Working paperProfessional

The Pectenotoxin Story: Episode III-The C Ring Strikes Back

Aho, J. E. & Pihko, P. M., 2006, p. P2, (The IX Spring Meeting of Synthetic Chemistry Kuopio 6-7 June 2006).

Research output: Working paperProfessional

The PectenoToxin Story: Episode IV - the NEW HOPE

Aho, J. E. & Pihko, P. M., 2006, (COST Action D28, Santorini, Greece, Sep 28-1 Oct 2006).

Research output: Working paperProfessional

Thermodynamic and kinetic phenomena in hydrometallurgical processes.Graduate School Course, 25-27 October 2006, Espoo, Finland

Selin, L. & Lundström, M., 2006, Espoo, (Helsinki University of Technology Publications in Materials Science and Engineering; no. TKK-MT-182).

Research output: Working paperProfessional

Towards the total synthesis of calyculin C

Stewart, A. J. W. & Koskinen, A. M. P., 2006, Kyoto, Japan, p. P-552, (International Conference Biodiversity and Natural Products, Kyoto, Japan 23-28, 2006).

Research output: Working paperProfessional

Uudet kaupunkimaiset pientaloalueet asukkaiden kokemana, Viihtyisyyttä, arkkitehtuuria ja kehitysmahdollisuuksia

Salovaara, J., 2006, Espoo, p. 125, (Teknillisen korkeakoulun puutekniikan laboratorion tiedonantoja; no. 98).

Research output: Working paperProfessional

Virtaustekniikkaa materiaalitekniikan opiskelijoille

Heiskanen, K., 2006, Otamedia, p. 167, (Teknillisen korkeakoulun materiaalitekniikan julkaisuja; no. TKK-MT-167).

Research output: Working paperProfessional

VTT Symposium 244.Applied Material Research at VTT.Symposium on Applied Materials.Espoo, Finland, 8 June 2006.Ritschkoff, Anne-Christine, Koskinen, Jari & Paajanen, Mika (Eds.)

Turunen, E., Varis, T., Gustafsson, T. E., Keskinen, J., Lintunen, P., Lintula, P. & Hannula, S-P., 2006, Espoo, p. 188-199, (VTT).

Research output: Working paperProfessional

WDS SCHOOL, Graduate School Seminar

Heikinheimo, E. & Selin, L., 2006, Espoo, p. 116, (Teknillisen korkeakoulun materiaalitekniikan julkaisuja; no. TKK-MT-175).

Research output: Working paperProfessional

Ympäristöindeksit

Lindholm, J., 2006, Espoo, p. 30, (Plant design report series; no. 87).

Research output: Working paperProfessional

Yritysten yhteiskuntavastuu

Puoskari, M., 2006, Espoo, p. 23, (Plant design report series).

Research output: Working paperProfessional

2005

Advantages of organic co-solvent in cross-linked xylose isomerase catalysed isomerization of monosaccharides

Vilonen, K., Puoskari, M. & Krause, O., 2005, p. 19, (Biocatalysis in non-conventional media, Manchester, United Kingdom, 13.-14.4.2005).

Research output: Working paperProfessional

A great Adventure towards the synthesis of pectonotoxins

Pihko, P. M. & Aho, J. E., 2005, Turku, p. O9, (8th Spring Meeting of Synthetic Chemistry).

Research output: Working paperProfessional

Analysing sawnwood supply distribution in Finnish sawmilling industry with database approach

Virtanen, J., 2005, Espoo, p. 4, (Laboratory of wood technology reports; no. Raportti 96).

Research output: Working paperProfessional

Ao-Ag core-shell nanoparticles by a facile "one-pot" synthesis using reduction followed by galvanic exchange reaction

Laaksonen, T., Johans, C., Ras, R. & Kontturi, K., 2005, (MC7: Functional materials for the 21st century, 5.-8.7.2005, Edinburgh, UK).

Research output: Working paperProfessional

A practical tool for analysing the water management in paper mills

Ylönen, T., Ora, M. & Paulapuro, H., 2005, (ABTCP-PI 2005 (38th Pulp and Paper International Congress & Exhibition), São Paulo, Brasilia, 17.-20.10.2005).

Research output: Working paperProfessional

Atomic Layer Deposition of Rare Earth Oxide Thin Films Exploiting Different Precursor Chemistries

Niinistö, L., Putkonen, M., Päiväsaari, J., Niinistö, J., Kosola, A., Nieminen, M., Dezellah, C. L. & Winter, C. H., 2005, (4th Rare Earth Research Conference, Keystone, Colorado, USA, 26-30.6. 2005).

Research output: Working paperProfessional

Catalytic clean-up of gasification gas in bench-scale slipstream equipment

Ruokomäki, J., Juutilainen, S., Krause, O. & Simell, P., 2005, p. 180, (Seventh European Congress on Catalysis EUROPACAT-VII, Sofia, Bulgaria, 28.8.-1.9.2005).

Research output: Working paperProfessional

Characterization of Novel EFTE-Based Membrane and its Performance in DMFC

Saarinen, V., Kallio, T., Paronen, M. & Kontturi, K., 2005, p. 47, (Lucerne Fuel Cell Forum 2005, 4.-8.7.2005 Lucerne, Switzerland).

Research output: Working paperProfessional

Chemical modification on surface of cellulose microfibrils

Syverud, K., Schult, T., Stenstad, P. M., Tanem, B. S. & Stenius, P., 2005, p. 1, (The Japanese-European Workshop on Cellulose and Functional Polysaccharides 2005, Vienna, Austria, September 12-14, 2005).

Research output: Working paperProfessional

Consecutive organocatalytic and Metall-Mediated Reactions in Total Synthesis

Pihko, P. M. & Erkkilä, A., 2005, Bordeaux, Ranska, (Sixth Tetrahedron Symposium, 29.6.-1.7.2005).

Research output: Working paperProfessional

Coping with military past pollution in Estonia

Reinik, J., Kallas, J. & Jakobsson, K., 2005, (The sixth European Meeting on Environmental Chemistry, Belgrade, Serbia and Montenegro, December 6-10, 2005).

Research output: Working paperProfessional

Corrosion resistance of composite and gradient coatings in aggressive solutions and melts.

Gasik, M., Malinina, M. & Sammi, T., 2005, p. 560-573, (Proc. 16th Intern. Plansee Seminar, Austria 2005).

Research output: Working paperProfessional

Data-based methods and prior knowledge in process monitoring

Vermasvuori, M., 2005, Espoo, (Lab of Process Control and Automation ereport series).

Research output: Working paperProfessional

Design and development of novel in-situ composites for high-temperature applications

Mazur, A. V. & Gasik, M. M., 2005, p. 1205-1216, (Proc. 16th International Plansee Seminar, Plansee, Austria, 1 (2005)).

Research output: Working paperProfessional

Development trends of Operator Support Systems

Jämsä-Jounela, S-L., 2005, Turku, p. 67-71, (Process Integration, Technology Programme Report).

Research output: Working paperProfessional

Effect of conjugated linoleic acid (CLA) on the lipid composition of Saccharomyces cerevisiae

Jaakola, S., Vahvaselkä, M. & Laakso, S., 2005, (The 23rd Nordic Lipid Symposium, Reykjavik, Islanti, 1.-4.6.2005).

Research output: Working paperProfessional

Effect of metallic and non-metallic impurities of charge materials on the quality of reinforcing bar produced in EAF

Buró, B. & Holappa, L., 2005, Espoo, p. 50, (Teknillisen korkeakoulun materiaalitekniikan ja metallurgian julkaisuja; no. TKK-MT-165).

Research output: Working paperProfessional

Efficient chlorine dioxide bleaching of eucalyptus kraft pulp in laboratory scale

Toikka, K., Pekkanen, L., Jääskeläinen, A-S., Vuorinen, T., Vehmaa, J. & Pikka, O., 2005, p. 259-261, (2005 International Pulp Bleaching Conference).

Research output: Working paperProfessional

Electrochemical Study of Interfacial Composite Nanostructures: Polyelectrolyte/Gold Nanoparticle Multilayes Assembled on Phospholipid/Dextran Sulfate at a Liquid-Liquid Interface

Santos, H. A., Chirea, M., Garcia-Morales, V., Filva, F., Mannares, J. A. & Kontturi, K., 2005, (Electrochem 2005, Newcastle, England, 4.-7..9.2005).

Research output: Working paperProfessional

Evaluation and Prospect for Novel Casting Technologies

Wang, S. & Holappa, L., 2005, Espoo, p. 20, (Teknillisen korkeakoulun materiaalitekniikan ja metallurgian julkaisuja; no. TKK-MK-150).

Research output: Working paperProfessional

Fibrillation of Mechanical Pulp Fibers

Kang, T. & Paulapuro, H., 2005, p. 261-265, (International Mechanical Pulping Conference, Oslo, NORWAY, June 7-9, 2005).

Research output: Working paperProfessional

14 Citations (Scopus)

GPS-X-mallinnusohjelman käyttö jätevedenpuhdistukseen liittyvässä tutkimuksessa

Haimi, H., 2005, Espoo, p. 16, (Plant Design Report Series; no. 81).

Research output: Working paperProfessional

High cell-density fermentation in biotechnology

Ojamo, H., 2005, Espoo, (Plant Design Report Series).

Research output: Working paperProfessional

How Easy it is to Provoke Reactions?

Pohjakallio, A. & Pihko, P. M., 2005, p. P26, (8th Spring Meeting of Synthetic Chemistry).

Research output: Working paperProfessional

Hydrogen Peroxide Production at Anthraquinone Crafted Carbon Electrode in the Fuel Cell Reactor

Lobyntseva, E., Kallio, T. & Kontturi, K., 2005, p. 51, (Lucerne Fuel Cell Forum 2005, 4.-8.7.2005, Lucerne, Switzerland).

Research output: Working paperProfessional

Inference and Decision Making Methods in Fault Diagnosis

Hui, C., 2005, Espoo, (Lab of Process Control and Automation report series).

Research output: Working paperProfessional

Inherent Safety Evaluation of MMS Process Concepts

Rahman, M., Heikkilä, A-M. & Hurme, M., 2005, Espoo, (Plant Design Report Series; no. 75).

Research output: Working paperProfessional

Inherent safety index evaluation of methyl methacrylate process concepts

Rahman, M., Heikkilä, A-M. & Hurme, M., 2005, Espoo, p. 51, (Plant Design Report Series; no. 75).

Research output: Working paperProfessional

Ionic Liquids for Rechargeable Lithium Batteries

Salminen, J., Papainonomou, N., Kerr, J., Prausnitz, J. & Newman, J., 2005, USA, (Lawrence Berkeley National Laboratory (LBNL) julkaisu).

Research output: Working paperProfessional

Isomerization of rare sugars with CLXIC, Effects of co-solvents and substrate concentration on equilibrium

Puoskari, M., Vilonen, K. & Krause, O., 2005, p. 274, (BIOTRANS 2005 Symposium, 3.-8.7.2005, Delft, Alankomaat).

Research output: Working paperProfessional

Kompleksisten teollisuusprosessien monitorointi ja hallinta

Jämsä-Jounela, S-L., 2005, Helsinki, p. 43-46, (Teknologiaohjelmaraportti; no. 3/2005).

Research output: Working paperProfessional

Korroosionestotekniikan perusteet

Aromaa, J., 2005, Espoo, p. 132, (Helsinki University of Technology, Publications in Materials Science and Engineering; no. TKK-MT-168).

Research output: Working paperProfessional

Materiaalien zeta-potentiaalin ja nollavarauksen vaikutus adsorptioon ja saostumiseen

Salo, T. & Pehkonen, A., 2005, Espoo, p. 33, (Helsinki University of Technology, Publications in Materials Science and Engineering; no. TKK-MT-171).

Research output: Working paperProfessional

Materials production and synthesis / 2005, MT-0.3201

Kekkonen, M., 2005, Espoo, (Teknillisen korkeakoulun materiaalitekniikan julkaisuja; no. TKK-MT-172).

Research output: Working paperProfessional

Modelling and simulation of process configuration combining distillation and reaction

Jakobsson, K., 2005, Espoo, (Kemian laitetekniikan raporttisarja; no. 47).

Research output: Working paperProfessional

Modelling a process for dimerisation of 2-methylpropene

Ouni, T., 2005, Espoo, (Kemian laitetekniikan raporttisarja; no. 49).

Research output: Working paperProfessional

Modelling of reactive separation systems

Pyhälahti, A., 2005, Espoo, (Kemian laitetekniikan raporttisarja; no. 50).

Research output: Working paperProfessional

Multiphase thermodynamics of CO2 in industrial and environmental applications

Kobylin, P., Salminen, J. & Liukkonen, S., 2005, (KTY-seminaari Hiilidioksidi, Energian käyttö ja biopolttoaineen 5.10.2005).

Research output: Working paperProfessional