School of Chemical Engineering

Research Output

Filter
Working paper

Biodegradable Ternary Composites of Poly(ester-urethane)

Kylmä, J. & Seppälä, J. V., 1998, p. 1, (IUPAC 37th International Symposium on Macromolecules, Gold Coast, Australia, 12.-17.7.1998).

Research output: Working paperProfessional

Bio- ja elintarviketekniikka tuotekehityssektorina: teknisiä, regulatoorisia ja mikrobiologisia erityiskysymyksiä

Nordström, K., 2006, Espoo, p. 43, (Applied Biochemistry and Microbiology Report; no. 1/2006).

Research output: Working paperProfessional

Biolääkkeiden kliiniset lääkekokeet

Raitio, R., Rahkamo, L., Nieminen, O. & Nordström, K., 2002, Espoo, (Applied Biochemistry and Microbiology Report; no. 2).

Research output: Working paperProfessional

Biologiset analyysimenetelmät

Tuomi, T., 1997, TKK, Espoo, p. 232, (Applied Biochemistry and Microbiology report; no. 5).

Research output: Working paperProfessional

Biopharmaceutical business in California

Rautiainen, T., 1999, Helsinki, p. 24, (Tekes; no. 81/1999).

Research output: Working paperProfessional

Biopharmaceuticals regulation in Finland: Challenges for the developer, regulator and investor

Nieminen, O., Närhi, M., Enden, P. & Nordström, K., 2002, p. 1-2, (Kemian Päivät, Helsinki, 11-13.11.2002).

Research output: Working paperProfessional

Bioreactor Measurement and Simulation Environment

Salonen, K., Kiviharju, K. & Eerikäinen, T., 2007, p. 279-284, (10th International IFAC Symposium on Computer Applications in Biotechnology, Cancun, Mexico, June 4-6, 2007).

Research output: Working paperProfessional

Bioremediation of contaminated soil with fungi in aerobic conditions

Winquist, E., Anasonye, F., Salonen, K., Räsänen, M., Steffen, K. & Tuomela, M., 2011.

Research output: Working paperProfessional

Bioresorbable Polymer Scaffolds by Micromolding in Capillaries

Malin, M., Korhonen, H., Jokinen, V., Aura, S., Leinikka, M., Franssila, S. & Seppälä, J., 2010.

Research output: Working paperProfessional

Biotekniikka teknologisena tuotekehityssektorina

Nordström, K., 2000, Espoo, p. 43, (Applied Biochemistry and Microbiology Report).

Research output: Working paperProfessional

Biotekninen hierto, loppuraportti

Pere, J., Ellmén, J., Gullichsen, J. & Viikari, L., 1998, Espoo, p. 72, (KESTÄVÄ PAPERI -tutkimusohjelma; no. 24).

Research output: Working paperProfessional

Bioteknologisten sovellusten arvonluonti Suomen Metsäklusterissa

Hermans, R., Arvola, A., Hauhio, L., Lindström, M., Nikinmaa, H., Tikka, P. & Haltia, O., 2004, Helsinki, p. 34, (Keskustelunaiheita - Discussion papers; no. 955).

Research output: Working paperProfessional

Blekning av kemisk massa

Backlund, B., Gellerstedt, G., Fuhrmann, A., Rautonen, R., Soteland, N. & Lindholm, C-A., 1997, Tukholma, p. 150, (Nordpap/SCAN Forskrapport; no. DP2/56/705).

Research output: Working paperProfessional

BLENDS OF THERMOREVERSIBLE GELS OF POLYANILINE WITH THERMOPLASTIC POLYMERS: CO-CONTINUOUS POLYMER STRUCTURES

Ikkala, O., Tiitu, M., Tanner, J. & Ruokolainen, J., 1998, Montpellier, France, (The 10th International Conference on Synthetic Metals, Montpellier, France, July 12-18, 1998.).

Research output: Working paperProfessional

Blue electroluminescence of SrS:Ce,SiCl4 thin films grown by atomic layer epitaxy

Soininen, P., Nykänen, E., Leskelä, M. & Niinistö, L., 1993, Strasbourg, p. 511-514, (Eurodisplay'93, 13th International Display Research Conference, Strasbourg, 1993).

Research output: Working paperProfessional

Bound States in a Superconducting Correlated-Electron System

Alastalo, A. & Salomaa, M., 1997, p. 9, (University of Helsinki Report Series in Physics HU-P-262).

Research output: Working paperProfessional

B-site ordered double perovskites as SOFC anodes

Vasala, S., 2011.

Research output: Working paperProfessional

Bulk Polymerization of Lactones in Batch Reactor

Rich, J., Korhonen, H. & Seppälä, J., 1999, p. 1, (International Symposium on Recent Advances in Ring Opening (Metathesis) Polymerization, Mons, Belgium, 12.-15.4.1999).

Research output: Working paperProfessional

Ca0.9La0.1MnO3 Perovskite for the Electroreduction of Dioxygen

Linnekoski, J., Krause, O., Valo, T., Gasik, M. & Lampinen, M., 2001, p. 18-, (EUROPACAT V, Limerick, Irlanti, 2.-7.9.2001).

Research output: Working paperProfessional

Ca doping effect on superconductivity of (Yb1-xCax)(Ba0.8Sr0.2)2Cu3O6+z

Fujinami, K., Suematsu, S., Karppinen, M. & Yamauchi, H., 1996, p. p. P14, (Joint Symposia, The First Yamazaki International Symposium Oxide Materials with Optoelectronic Functions and 3rd TIT International Symposium on Oxide Electronics, Tokio, Japani, 18.-20.12.1996).

Research output: Working paperProfessional

4 Citations (Scopus)

Calculation of Dendrite arm spacing in solidified Steels

Miettinen, J. & Kytönen, H., 2006, Helsinki, p. 20, (Teknillisen korkeakoulun materiaalitekniikan julkaisuja; no. TKK-MT-186).

Research output: Working paperProfessional

Calculation of Density in Liquid Steels

Miettinen, J. & Kytönen, H., 2006, Helsinki, p. 41, (Teknillisen korkeakoulun materiaalitekniikan julkaisuja; no. TKK-MR-187).

Research output: Working paperProfessional

Calculation of liquid viscosity for copper alloys

Miettinen, J., 2001, Espoo, (Teknillisen korkeakoulun materiaalitekniikan ja metallurgian julkaisuja; no. TKK-MK-119).

Research output: Working paperProfessional

Calculation of metastable thermodynamics in multicomponent aqueous system

Salminen, J., Koukkari, P., Penttilä, K. & Liukkonen, S., 1998, (Kemia'98, Helsinki 3.-5.11.1998).

Research output: Working paperProfessional

Calculation of thermophysical properties for special stainless steels

Miettinen, J., 1995, Espoo, p. 13.

Research output: Working paperProfessional

Calculation of thermophysical properties in binary copper-rich Cu-Cr, Cu-Mg, Cu-Te, Cu-Ti and Cu-Zr alloys

Miettinen, J., 2002, Helsinki, (Publications in Materials Science and Metallurgy; no. TKK-MK-130).

Research output: Working paperProfessional

Calculation of thermophysical properties in binary one-solid-phase alloys

Miettinen, J., 1995, Espoo, p. 17.

Research output: Working paperProfessional

Calculation of Viscosity in Liquid Steels

Miettinen, J. & Kytönen, H., 2006, Helsinki, p. 47, (Teknillisen korkeakoulun materiaalitekniikan julkaisuja; no. TKK-MT-188).

Research output: Working paperProfessional

Calorimetric and infra-red spectroscopy studies of the acid-base properties of gas-phase prepared titania/silica

Keränen, J., Auroux, A., Iiskola, E. & Niinistö, L., 2002, p. 4, (ESTAC 8th European Symposium on Thermal Analysis and Calorimetry, Barcelona, Spain, August 2002).

Research output: Working paperProfessional

Calorimetric measurements of the acidity of supported vanadium oxides prepared by ALE and impregnation

Keränen, J., Auroux, A., Härkönen, S. & Niinistö, L., 2000, p. p. P16, (Calorimetry and Thermal Effects in Catalysis, Villeurbanne, Lyon, France, July 4-7, 2000).

Research output: Working paperProfessional

Can lipid rancidity be avoided during malting of oat grains?

Åkerberg, M., Lehtinen, P. & Laakso, S., 1999, Kolding, Tanska, p. 8-9, (20th Nordic Lipid Symposium, Kolding, Denmark, 13-16.6.1999).

Research output: Working paperProfessional

Carrier distribution and superconductivity characteristics in multi-layered copper oxide structures

Kotiranta, M., Karppinen, M., Yamauchi, H., Liu, R. S. & Niinistö, L., 2000, p. 34, (Finnish Chemical Congress and Exhibition, Helsinki, Finland, November 15-17, 2000).

Research output: Working paperProfessional

CAS2 - Solidification Analysis Package for Binary Copper Alloys, User Manual of DOS Version 1.0.0

Miettinen, J., 2004, Helsinki, (Teknillisen korkeakoulun materiaalitekniikan ja metallurgian julkaisuja).

Research output: Working paperProfessional

CAS2 - Solidification analysis package for binary copper alloys, user manual of DOS version 2.0.0

Miettinen, J., 2004, Helsinki, p. 25, (Teknillisen korkeakoulun materiaalitekniikan ja metallurgian julkaisuja; no. TKK-MK-162).

Research output: Working paperProfessional

Case-basaed reasoning techniques and commercial software tools

Seuranen, T., 2000, Espoo, p. 65, (Plant design report series; no. 65).

Research output: Working paperProfessional

Case-Based Reasoning Prototype System for Equipment Selection: Fluid Mixer Example

Koiranen, T. & Hurme, M., 1997, Espoo, p. 13, (Tehdassuunnittelun raporttisarja; no. 45).

Research output: Working paperProfessional

Case-Based Reasoning Prototype system for Equipmment Selection Fluid Mixer Example

Koiranen, T. & Hurme, M., 1997, Espoo, (Tehdassuunnittelun raporttisarja; no. 45).

Research output: Working paperProfessional

CASIM software for on-line calculation of liquid pool end position in continuous casting

Miettinen, J., Louhenkilpi, S., Laine, J. & Hätönen, T., 1998, Madrid, p. 1041-1044, (3rd European Conference on Continuous Casting, Madrid, 20-23.10.1998).

Research output: Working paperProfessional

CASTING 1997, International ADI and Simulation Conference

Holmberg, K., 1998, Otaniemi, p. 123, (Raportti; no. VAL 1/98).

Research output: Working paperProfessional

Catalysis and separation technology based on cross-linked enzyme crystals

Jokela, J., Finell, J., Vuolanto, A., Mustamäki, S., Riekkola, M-L. & Leisola, M., 2001, (3rd Research Meeting of the Research Programme for Process Technology (PROTEK) by Academy of Finland, 23.11.2001, Finland).

Research output: Working paperProfessional

Catalysis and separation technology based on cross-linked protein crystals

Jokela, J., Vuolanto, A. & Leisola, M., 2002, (Netherlands Catalysis and Chemistry Conference III, Noordwijkerohout, March 4-6, 2002).

Research output: Working paperProfessional

Catalysis for renewable diesel fuels

Krause, O., Gutierrez, A. & Niemelä, M., 2010.

Research output: Working paperProfessional

Catalysts for alkaline fuel cell: Synthesis and properties of MnCo2O4

Nissinen, T., 2002, (NEFP Workshop on "Frontiers in Battery and Fuel Cell Research", Uppsala, Ruotsi, 10. - 11.06.2002).

Research output: Working paperProfessional

Catalytic clean-up of gasification gas in bench-scale slipstream equipment

Ruokomäki, J., Juutilainen, S., Krause, O. & Simell, P., 2005, p. 180, (Seventh European Congress on Catalysis EUROPACAT-VII, Sofia, Bulgaria, 28.8.-1.9.2005).

Research output: Working paperProfessional

Catalytic conversion of hemicellulosic monosaccharides to furfurals

Vilonen, K., Karinen, R., Linnekoski, J. & Niemelä, M., 2010.

Research output: Working paperProfessional

Catalytic enantioselective synthesis of prelactone B

Erkkilä, A. & Pihko, P. M., 2003, p. A-31, (Komppa Centenary Symposium, Espoo, Finland, July 6-9).

Research output: Working paperProfessional

Catalytic Materials for Hot Gas Cleaning of Biomass Gasification Gas

Rauas, E. K., Simell, P. A. & Krause, A. O. I., 2001, p. 7-, (EUROPACAT V, Limerick, Irlanti, 2.-7.9.2001).

Research output: Working paperProfessional

Catalytic preparation of 2-isoxazolines from a,ßunsaturated aldehydes and oximes

Pohjakallio, A. & Pihko, P. M., 2008, Vilnius, Lithuania, (5th Biannual Balticum Organicum Syntheticum, Vilnius, Lithuania, June 29 - July 2, 2008).

Research output: Working paperProfessional

Catalytic reactions of synthesis gas; Part IV: Heterogeneous hydroformylation

Niemelä, M., 1994, Espoo, p. 23, (Industrial Chemistry Publication Series; no. 1235-6840).

Research output: Working paperProfessional

Cation and oxygen stoichiometry in BaRE(Cu,Fe)_(2)O_(5+delta) double perovskites

Lehmus, K., Karppinen, M., Yamauchi, H. & Niinistö, L., 2000, p. 35, (Finnish Chemical Congress and Exhibition, Helsinki, Finland, November 15-17, 2000).

Research output: Working paperProfessional