Department of Mechanical Engineering

Organisational unit: Department

Research outputs

  1. 2020
  2. Published

    Humans use Optokinetic Eye Movements to Track Waypoints for Steering

    Lappi, O., Pekkanen, J., Rinkkala, P., Tuhkanen, S., Tuononen, A. & Virtanen, J. P., 1 Dec 2020, In : Scientific Reports. 10, 1, 4175.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    A bibliometric analysis and systematic review of shipboard Decision Support Systems for accident prevention

    Gil, M., Wróbel, K., Montewka, J. & Goerlandt, F., Aug 2020, In : Safety Science. 128, 104717.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  4. Published
  5. Published

    Review and analysis of methods for assessing maritime waterway risk based on non-accident events detected from AIS data

    Du, L., Goerlandt, F. & Kujala, P., Aug 2020, In : Reliability Engineering and System Safety. 200, 106933.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  6. Published

    Computational and experimental investigation of a swirl nozzle for viscous fluids

    Laurila, E., Koivisto, S., Kankkunen, A., Saari, K., Maakala, Jarvinen, M. & Vuorinen, V., Jul 2020, In : INTERNATIONAL JOURNAL OF MULTIPHASE FLOW. 128, 17 p., 103278.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Effect of random variation of input and various daily activities on wear in a hip joint simulator

    Viitala, R. & Saikko, V., 9 Jun 2020, In : Journal of Biomechanics. 106, 7 p., 109831.

    Research output: Contribution to journalArticleScientificpeer-review

  8. Published

    Buckling of sandwich panels with transversely flexible core : Correction of the equivalent single-layer model using thick-faces effect

    Jelovica, J. & Romanoff, J., 1 Jun 2020, In : Journal of Sandwich Structures and Materials. 22, 5, p. 1612-1634

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Limit state analyses in design of thin-walled marine structures - Some aspects on length-scales

    Romanoff, J., Remes, H., Varsta, P., Reinaldo Goncalves, B., Körgesaar, M., Lillemäe-Avi, I., Jelovica, J. & Liinalampi, S., 1 Jun 2020, In : JOURNAL OF OFFSHORE MECHANICS AND ARCTIC ENGINEERING. 142, 3, 8 p., 030801.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Miniature reproduction of raking tests on marine structure: Similarity technique and experiment

    Calle, M. A. G., Salmi, M., Mazzariol, L. M. & Kujala, P., 1 Jun 2020, In : Engineering Structures. 212, 110527.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    The influence of interacting small defects on the fatigue limits of a pure iron and a bearing steel

    Åman, M., Wada, K., Matsunaga, H., Remes, H. & Marquis, G., 1 Jun 2020, In : INTERNATIONAL JOURNAL OF FATIGUE. 135, 105560.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    Fatigue strength modelling of high-performing welded joints

    Remes, H., Gallo, P., Jelovica, J., Romanoff, J. & Lehto, P., Jun 2020, In : INTERNATIONAL JOURNAL OF FATIGUE. 135, 105555.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Towards national policy for open source hardware research: The case of Finland

    Heikkinen, I., Savin, H., Partanen, J., Seppälä, J. & Pearce, J. M., Jun 2020, In : Technological Forecasting and Social Change. 155, 119986.

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Experimental comparison of thermal conditions in office rooms: diffuse ceiling ventilation, chilled beam system, and chilled ceiling combined with mixing ventilation

    Lestinen, S., Mustakallio, P., Kilpeläinen, S., Kosonen, R., Jokisalo, J., Koskela, H. & Melikov, A. K., 27 May 2020, In : Science and Technology for the Built Environment. 26, 5, p. 631-642 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. E-pub ahead of print

    Preventing shipping accidents: Past, present, and future of waterway risk management with Baltic Sea focus

    Kulkarni, K., Goerlandt, F., Li, J., Banda, O. V. & Kujala, P., 20 May 2020, In : Safety Science. 129, 20 p., 104798.

    Research output: Contribution to journalArticleScientificpeer-review

  16. E-pub ahead of print

    Replacing hard coal with wind and nuclear power in Finland-impacts on electricity and district heating markets

    Khosravi, A., Olkkonen, V., Farsaei, A. & Syri, S., 20 May 2020, In : Energy (the International Journal). 203, 19 p., 117884.

    Research output: Contribution to journalArticleScientificpeer-review

  17. E-pub ahead of print

    DEM investigation on the mechanical behaviors of flawed specimens subjected to coupled static-dynamic loads

    Feng, P., Wei, M., Dai, F., Tang, R., Qiu, H. & Gong, J., 18 May 2020, In : SOIL DYNAMICS AND EARTHQUAKE ENGINEERING. 135, 16 p., 106220.

    Research output: Contribution to journalArticleScientificpeer-review

  18. E-pub ahead of print
  19. Published

    Cold-crystallizing erythritol-polyelectrolyte: Scaling up reliable long-term heat storage material

    Turunen, K., Yazdani, M. R., Puupponen, S., Santasalo-Aarnio, A. & Seppälä, A., 15 May 2020, In : Applied Energy. 266, 12 p., 114890.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published
  21. E-pub ahead of print

    Effect of long-term thermal history on physiological acclimatization and prediction of thermal sensation in typical winter conditions

    Wu, Y., Liu, H., Chen, B., Li, B., Kosonen, R., Jokisalo, J. & Chen, T., 14 May 2020, In : Building and Environment. 179, 14 p., 106936.

    Research output: Contribution to journalArticleScientificpeer-review

  22. E-pub ahead of print

    Effect of materials positioning on dissimilar modified friction stir clinching between aluminum 5754-O and 2024-T3 sheets

    Haiyan, Z. & Mehta, K., 13 May 2020, In : Vacuum. 178, 109445.

    Research output: Contribution to journalArticleScientificpeer-review

  23. E-pub ahead of print

    Modeling and energy analysis of a linear concentrating photovoltaic system cooled by two-phase mechanical pumped loop system

    Garcia Pabon, J. J., Khosravi, A., Malekan, M. & R. Sandoval, O., 13 May 2020, In : Renewable Energy. 157, p. 273-289 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. E-pub ahead of print

    Numerical experiments on ice-structure interaction in shallow water

    Lemström, I., Polojärvi, A. & Tuhkuri, J., 13 May 2020, In : Cold Regions Science and Technology. 176, 13 p., 103088.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  25. E-pub ahead of print

    Excellent indoor climate and high performing ventilation - RoomVent 2018

    Kosonen, R., 9 May 2020, In : Indoor and Built Environment. 1 p., UNSP 1420326X20925066.

    Research output: Contribution to journalEditorialScientific

  26. E-pub ahead of print

    Identifying research directions of a remotely-controlled merchant ship by revisiting her system-theoretic safety control structure

    Wróbel, K., Gil, M. & Montewka, J., 8 May 2020, In : Safety Science. 129, 12 p., 104797.

    Research output: Contribution to journalArticleScientificpeer-review

  27. Published

    Mechanical Deformation of Lithium-Ion Pouch Cells under In-Plane Loads-Part I: Experimental Investigation

    Zhu, J., Koch, M. M., Lian, J., Li, W. & Wierzbicki, T., 7 May 2020, In : Journal of the Electrochemical Society. 167, 9, 9 p., 090533.

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Risk response over time: political compartmentalization of terrorism risk perception

    Koivula, A., Räsänen, P., Oksanen, A. & Keipi, T., 6 May 2020, In : JOURNAL OF RISK RESEARCH. 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  29. E-pub ahead of print
  30. Published

    Comparison of nonlinear one- and two-way FFSI methods for the prediction of the symmetric response of a containership in waves

    Lakshmynarayanana, P. A. K. & Hirdaris, S., 1 May 2020, In : Ocean Engineering. 203, 17 p., 107179.

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Finite element based meta-modeling of ship-ice interaction at shoulder and midship areas for ship performance simulation

    Li, F., Kõrgesaar, M., Kujala, P. & Goerlandt, F., 1 May 2020, In : Marine Structures. 71, 22 p., 102736.

    Research output: Contribution to journalArticleScientificpeer-review

  32. Published

    Large-eddy simulation of dual-fuel spray ignition at different ambient temperatures

    Tekgül, B., Kahila, H., Kaario, O. & Vuorinen, V., 1 May 2020, In : Combustion and Flame. 215, p. 51-65 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Numerical simulation of level ice impact on landing craft bow considering the transverse isotropy of Baltic Sea ice based on XFEM

    Xu, Y., Kujala, P., Hu, Z., Li, F. & Chen, G., 1 May 2020, In : Marine Structures. 71, 102735.

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    The effects of learning in production and group size on the lot-sizing problem

    Jaber, M. Y. & Peltokorpi, J., 1 May 2020, In : Applied Mathematical Modelling. 81, p. 419-427 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Nonlinear finite element analysis of lattice core sandwich plates

    Nampally, P., Karttunen, A. T. & Reddy, J. N., May 2020, In : INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS. 121, 12 p., 103423.

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Cumulative Inaccuracies in Implementation of Additive Manufacturing Through Medical Imaging, 3D Thresholding, and 3D Modeling: A Case Study for an End-Use Implant

    Akmal, J. S., Salmi, M., Hemming, B., Teir, L., Suomalainen, A., Kortesniemi, M., Partanen, J. & Lassila, A., 24 Apr 2020, In : Applied Sciences (Switzerland). 10, 8, 28 p., 2968.

    Research output: Contribution to journalArticleScientificpeer-review

  37. Published

    Energy Consumption and Lifecycle Cost Analysis of Electric City Buses with Multispeed Gearboxes

    Ritari, A., Vepsäläinen, J., Kivekäs, K., Tammi, K. & Laitinen, H., 24 Apr 2020, In : Energies. 13, 8, 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    IoT connected device for vibration analysis and measurement

    Koene, I., Klar, V. & Viitala, R., 22 Apr 2020, In : HardwareX. 7, 15 p., e00109.

    Research output: Contribution to journalArticleScientificpeer-review

  39. E-pub ahead of print

    Effect of positional errors on the accuracy of multi-probe roundness measurement methods

    Tiainen, T. & Viitala, R., 20 Apr 2020, In : Mechanical Systems and Signal Processing. 144, 15 p., 106883.

    Research output: Contribution to journalArticleScientificpeer-review

  40. Published

    Anisotropy of additively manufactured AlSi10Mg: threads and surface integrity

    Ullah, R., Akmal, J. S., Laakso, S. & Niemi, E., 19 Apr 2020, In : International Journal of Advanced Manufacturing Technology. 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    A framework to identify factors influencing navigational risk for Maritime Autonomous Surface Ships

    Fan, C., Wróbel, K., Montewka, J., Gil, M., Wan, C. & Zhang, D., 15 Apr 2020, In : Ocean Engineering. 202, 15 p., 107188.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Intergranular corrosion behavior of low-chromium ferritic stainless steel without Cr-carbide precipitation after aging

    Hu, S., Mao, Y., Liu, X., Han, E-H. & Hänninen, H., 15 Apr 2020, In : Corrosion Science. 166, 108420.

    Research output: Contribution to journalArticleScientificpeer-review

  43. E-pub ahead of print

    Additive manufacturing of miniature marine structures for crashworthiness verification: Scaling technique and experimental tests

    Calle, M. A. G., Salmi, M., Mazzariol, L. M., Alves, M. & Kujala, P., 14 Apr 2020, In : Marine Structures. 72, 18 p., 102764.

    Research output: Contribution to journalArticleScientificpeer-review

  44. E-pub ahead of print

    Crystallographic orientation and spatially resolved damage in a dispersion-hardened Al alloy

    Xie, Q., Lian, J., Sidor, J. J., Sun, F., Yan, X., Chen, C., Liu, T., Chen, W., Yang, P., An, K. & Wang, Y., 14 Apr 2020, In : Acta Materialia. 193, p. 138-150 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Impact of Ethane Enrichment on Diesel-Methane Dual-Fuel Combustion

    Ahmad, Z., Kaario, O., Cheng, Q. & Larmi, M., 14 Apr 2020, In : SAE Technical Papers. 2020-April, April

    Research output: Contribution to journalConference articleScientificpeer-review

  46. Published

    Simultaneous Visualization of Natural Luminosity and Chemiluminescence of Dual Fuel Combustion in an Optically Accessible Engine

    Cheng, Q., Ahmad, Z., Kaario, O. & Larmi, M., 14 Apr 2020, In : SAE Technical Papers. 2020-April, April

    Research output: Contribution to journalConference articleScientificpeer-review

  47. E-pub ahead of print
  48. Published

    The effect of deep energy retrofit on the hourly power demand of Finnish detached houses

    Hirvonen, J., Jokisalo, J. & Kosonen, R., 7 Apr 2020, In : Energies. 13, 7, 26 p., 1773.

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    On the vibrational responses of thin FGM tubes subjected to internal sequential moving pressure

    Malekan, M., Khosravi, A., Zanin, A. & Aghababaei, R., 6 Apr 2020, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 42, 5, 19 p., 220.

    Research output: Contribution to journalArticleScientificpeer-review

  50. E-pub ahead of print

    3D printing of dense and porous TiO2 structures

    Aleni, A. H., Kretzschmar, N., Jansson, A., Ituarte, I. F. & St-Pierre, L., 1 Apr 2020, In : Ceramics International. 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  51. Published

    A numerical study on combustion mode characterization for locally stratified dual-fuel mixtures

    Karimkashi Arani, S., Kahila, H., Kaario, O., Larmi, M. & Vuorinen, V., 1 Apr 2020, In : Combustion and Flame. 214, p. 121-135 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 3 4 5 6 7 8 ...162 Next

ID: 18098