Department of Chemical and Metallurgical Engineering

Organisational unit: Department

Research outputs

  1. 2020
  2. Published
  3. Published
  4. Published

    Gas evolution characterization and phase transformation during thermal treatment of cathode plates from spent LiFePO4 batteries

    Jie, Y., Yang, S., Hu, F., Li, Y., Ye, L., Zhao, D., Jin, W., Chang, C., Lai, Y. & Chen, Y., 1 Feb 2020, In : Thermochimica Acta. 684, 178483.

    Research output: Contribution to journalArticle

  5. Published

    Industry 4.0 based process data analytics platform: A waste-to-energy plant case study

    Kabugo, J. C., Jämsä-Jounela, S. L., Schiemann, R. & Binder, C., 1 Feb 2020, In : International Journal of Electrical Power and Energy Systems. 115, 105508.

    Research output: Contribution to journalArticle

  6. Published

    Purification efficiency of natural freeze crystallization for urban wastewaters

    John, M., Häkkinen, A. & Louhi-Kultanen, M., 1 Feb 2020, In : Cold Regions Science and Technology. 170, 102953.

    Research output: Contribution to journalArticle

  7. Published

    Assessing similarities between gold ores, concentrates, and tailings with case-based reasoning

    Leikola, M., Sauer, C., Rintala, L., Aromaa, J. & Lundström, M., 15 Jan 2020, In : Minerals Engineering. 146, 106113.

    Research output: Contribution to journalArticle

  8. Published

    A high-performance all-iron non-aqueous redox flow battery

    Zhen, Y., Zhang, C., Yuan, J., Zhao, Y. & Li, Y., 1 Jan 2020, In : Journal of Power Sources. 445, 227331.

    Research output: Contribution to journalArticle

  9. Published

    Recovery and separation of rare earths and boron from spent Nd-Fe-B magnets

    Liu, F., Porvali, A., Wang, J. L., Wang, H., Peng, C., Wilson, B. P. & Lundström, M., 1 Jan 2020, In : Minerals Engineering. 145, 106097.

    Research output: Contribution to journalArticle

  10. Published

    Distribution Kinetics of Rare Earth Elements in Copper Smelting

    Klemettinen, L., Aromaa, R., Danczak, A., O'Brien, H., Taskinen, P. & Jokilaakso, A., 2020, In : SUSTAINABILITY. 12, 1, 17 p., 208.

    Research output: Contribution to journalArticle

  11. Published
  12. 2019
  13. Published

    Enhancing the performance of an all-organic non-aqueous redox flow battery

    Yuan, J., Zhang, C., Zhen, Y., Zhao, Y. & Li, Y., 15 Dec 2019, In : Journal of Power Sources. 443, 227283.

    Research output: Contribution to journalArticle

  14. Published
  15. Published
  16. Published

    A critical review of lithium-ion battery recycling processes from a circular economy perspective

    Velázquez-Martínez, O., Valio, J., Santasalo-Aarnio, A., Reuter, M. & Serna-Guerrero, R., 1 Dec 2019, In : Batteries. 5, 4, 68.

    Research output: Contribution to journalReview Article

  17. Published

    Behavior of Ga, In, Sn, and Te in Copper Matte Smelting

    Sukhomlinov, D., Klemettinen, L., O’Brien, H., Taskinen, P. & Jokilaakso, A., 1 Dec 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50, 6, p. 2723-2732 10 p.

    Research output: Contribution to journalArticle

  18. Published
  19. Published

    Optimization of CCT Equations Using Calculated Grain Boundary Soluble Compositions for the Simulation of Austenite Decomposition of Steels

    Miettinen, J., Koskenniska, S., Somani, M., Louhenkilpi, S., Pohjonen, A., Larkiola, J. & Kömi, J., 1 Dec 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50, 6, p. 2853-2866 14 p.

    Research output: Contribution to journalArticle

  20. Published
  21. Published
  22. Published

    Experimental Study of Effective Mass and Spin-Orbital Energy of the Al2O3/NiO Nanoheterostructure Material

    Munusamy, G., Mani, R., Varadharajan, K. & Narasimhan, S., 14 Nov 2019, In : Journal of Physical Chemistry A. 123, 45, p. 9857-9864 8 p.

    Research output: Contribution to journalArticle

  23. Published

    Film Conformality and Extracted Recombination Probabilities of O Atoms during Plasma-Assisted Atomic Layer Deposition of SiO2, TiO2, Al2O3, and HfO2

    Arts, K., Utriainen, M., Puurunen, R. L., Kessels, W. M. M. & Knoops, H. C. M., 7 Nov 2019, In : Journal of Physical Chemistry C. 123, 44, p. 27030-27035 6 p.

    Research output: Contribution to journalArticle

  24. Published

    Synthesis-Controlled α- And β-Molybdenum Carbide for Base-Promoted Transfer Hydrogenation of Lignin to Aromatic Monomers in Ethanol

    Wu, K., Yang, C., Zhu, Y., Wang, J., Wang, X., Liu, C., Liu, Y., Lu, H., Liang, B. & Li, Y., 6 Nov 2019, In : Industrial and Engineering Chemistry Research. 58, 44, p. 20270-20281 12 p.

    Research output: Contribution to journalArticle

  25. Published

    Kinetic modelling of the aqueous-phase reforming of fischer-tropsch water over ceria-zirconia supported nickel-copper catalyst

    Coronado, I., Arandia, A., Reinikainen, M., Karinen, R., Puurunen, R. L. & Lehtonen, J., 1 Nov 2019, In : CATALYSTS. 9, 11, 936.

    Research output: Contribution to journalArticle

  26. Published

    Vapor Pressures, Densities, and PC-SAFT Parameters for 11 Bio-compounds

    Baird, Z. S., Uusi-Kyyny, P., Pokki, J. P., Pedegert, E. & Alopaeus, V., 1 Nov 2019, In : INTERNATIONAL JOURNAL OF THERMOPHYSICS. 40, 11, 102.

    Research output: Contribution to journalArticle

  27. Published

    Study of butyl-amine nanocrystal cellulose in the flotation of complex sulphide ores

    Lopéz, R., Jordão, H., Hartmann, R., Ämmälä, A. & Carvalho, M. T., 20 Oct 2019, In : Colloids and Surfaces A: Physicochemical and Engineering Aspects. 579, 123655.

    Research output: Contribution to journalArticle

  28. Published

    Control Strategy of a Multiple Hearth Furnace Enhanced by Machine Learning Algorithms

    Gomez Fuentes, J., Jämsä-Jounela, S-L., Moseley, D. & Skuse, T., 14 Oct 2019, 4th Conference on Control and Fault Tolerant Systems (SysTol). IEEE, p. 250-256 (Conference on Control and Fault Tolerant Systems (SysTol)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  29. Published

    Process Monitoring Platform based on Industry 4.0 tools: a waste-to-energy plant case study

    Kabugo, J., Jämsä-Jounela, S-L., Schiemann, R. & Binder, C., 14 Oct 2019, 4th Conference on Control and Fault Tolerant Systems (SysTol). IEEE, p. 264-269 6 p. (Conference on Control and Fault Tolerant Systems (SysTol)).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionScientificpeer-review

  30. Published
  31. Published
  32. Published

    Preferential extraction of Ni(II) over Co(II) by arylsulphonic acid in the presence of pyridinecarboxylate ester: Experimental and DFT calculations

    Hu, F., Hu, H., Yang, J., Luo, Y., Lundstrom, M., Ji, G. & Hu, J., 1 Oct 2019, In : Journal of Molecular Liquids. 291, 111253.

    Research output: Contribution to journalArticle

  33. Published

    Sustainable management of the plastic-rich fraction of WEEE by utilization as a reducing agent in metallurgical processes

    Lotfian, S., Lennartsson, A. & Jokilaakso, A., 1 Oct 2019, In : Applied Sciences (Switzerland). 9, 20, 4224.

    Research output: Contribution to journalArticle

  34. Published

    Tungsten extractive metallurgy: A review of processes and their challenges for sustainability

    Shen, L., Li, X., Lindberg, D. & Taskinen, P., 1 Oct 2019, In : Minerals Engineering. 142, 105934.

    Research output: Contribution to journalReview Article

  35. E-pub ahead of print

    Applicability of solid process residues as sorbents for the treatment of industrial wastewaters

    Khalid, M. K., Agarwal, V., Wilson, B. P., Takaluoma, E. & Lundström, M., Oct 2019, In : Journal of Cleaner Production. 118951.

    Research output: Contribution to journalArticle

  36. E-pub ahead of print
  37. Accepted/In press

    Thermodynamics of Nitrogen Solubility and Nitride Formation in Fe–Cr–Ti–Al–Si–N Alloy Melts

    Paek, M., Son, H-S., Jang, J-M. & Pak, J-J., 24 Sep 2019, (Accepted/In press) In : ISIJ International. 60, 4

    Research output: Contribution to journalArticle

  38. E-pub ahead of print

    Recovery of High-Purity MnO2 from the Acid Leaching Solution of Spent Li-Ion Batteries

    Peng, C., Chang, C., Wang, Z., Wilson, B. P., Liu, F. & Lundström, M., 23 Sep 2019, In : JOM.

    Research output: Contribution to journalArticle

  39. Published

    Catalytic depolymerization of a lignin-rich corncob residue into aromatics in supercritical ethanol over an alumina-supported nimo alloy catalyst

    Bai, Y., Cui, K., Sang, Y., Wu, K., Yan, F., Mai, F., Ma, Z., Wen, Z., Chen, H., Chen, M. & 1 others, Li, Y., 19 Sep 2019, In : Energy and Fuels. 33, 9, p. 8657-8665 9 p.

    Research output: Contribution to journalArticle

  40. Published

    Enhanced mechanical and thermal properties of polyurethane/functionalised graphene oxide composites by in situ polymerisation

    Le Hoang Sinh, Nguyen Dang Luong & Seppala, J., 13 Sep 2019, In : PLASTICS RUBBER AND COMPOSITES. 48, 10, p. 466-476 11 p.

    Research output: Contribution to journalArticle

  41. Published

    Biomass-Assisted Reductive Leaching in H2SO4 Medium for the Recovery of Valuable Metals from Spent Mixed-Type Lithium-Ion Batteries

    Chen, Y., Chang, D., Liu, N., Hu, F., Peng, C., Zhou, X., He, J., Jie, Y., Wang, H., Wilson, B. P. & 1 others, Lundström, M., 11 Sep 2019, In : JOM. 8 p.

    Research output: Contribution to journalArticle

  42. Published

    Phosphorus modification to improve the hydrothermal stability of a Cu-SSZ-13 catalyst for selective reduction of NOx with NH 3

    Zhao, H., Zhao, Y., Liu, M., Li, X., Ma, Y., Yong, X., Chen, H. & Li, Y., 5 Sep 2019, In : Applied Catalysis B: Environmental. 252, p. 230-239 10 p.

    Research output: Contribution to journalArticle

  43. Published

    Enhanced hydrothermal stability of a Cu-SSZ-13 catalyst for the selective reduction of NOx by NH3 synthesized with SAPO-34 micro-crystallite as seed

    Zhao, H., Zhao, Y., Ma, Y., Yong, X., Wei, M., Chen, H., Zhang, C. & Li, Y., Sep 2019, In : Journal of Catalysis. 377, p. 218-223 6 p.

    Research output: Contribution to journalArticle

  44. Published

    Fault Propagation Analysis by Implementing Nearest Neighbors Method Using Process Connectivity

    Landman, R. & Jämsä-Jounela, S-L., Sep 2019, In : IEEE Transactions on Control Systems Technology. 27, 5, p. 2058-2067 10 p.

    Research output: Contribution to journalArticle

  45. Published
  46. Published

    CFD-DEM modelling of matte droplet behaviour in a flash smelting settler

    Jylhä, J-P. & Jokilaakso, A., 18 Aug 2019.

    Research output: Contribution to conferencePaperScientificpeer-review

  47. Published

    Flotation of a porphyry copper ore with cellulose-surfactant mixtures as frother agents

    Nuorivaara, T. & Serna Guerrero, R., 18 Aug 2019. 13 p.

    Research output: Contribution to conferencePaperScientificpeer-review

  48. Published

    Settling properties of copper electrorefining anode slimes

    Kalliomäki, T., Aji, A., Aromaa, J. & Lundström, M., 18 Aug 2019.

    Research output: Contribution to conferencePaperScientificpeer-review

  49. Published
  50. Published

    Nickel Supported on Mesoporous Zirconium Oxide by Atomic Layer Deposition: Initial Fixed-Bed Reactor Study

    Voigt, P., Haimi, E., Lahtinen, J., Cheah, Y. W., Mäkelä, E., Viinikainen, T. & Puurunen, R. L., Aug 2019, In : Topics in Catalysis. 7–11, p. 611–620

    Research output: Contribution to journalArticle

  51. Published

    The impact of sustainable supply chain on waste-to-energy operations

    Mohammadi, M. & Harjunkoski, I., 25 Jul 2019, Computer Aided Chemical Engineering. Elsevier B.V., p. 1147-1152 6 p. (Computer Aided Chemical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceedingChapterScientificpeer-review

  52. Published

    Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants

    Bartolomeu, F., Fonseca, J., Peixinho, N., Alves, N., Gasik, M., Silva, F. S. & Miranda, G., 22 Jul 2019, In : Journal of the Mechanical Behavior of Biomedical Materials. 99, p. 104-117 14 p.

    Research output: Contribution to journalArticle

Previous 1 2 3 4 5 6 7 8 ...38 Next

ID: 8801521