Wood Science and Technology

Research outputs

  1. 2018
  2. Published

    Analyzing reversible changes in hygroscopicity of thermally modified eucalypt wood from open and closed reactor systems

    Wentzel, M., Altgen, M. & Militz, H., 1 Jul 2018, In : Wood Science and Technology. 52, 4, p. 889-907 19 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Experimental techniques for characterising water in wood covering the range from dry to fully watersaturated

    Engelund Thybring, E., Kymäläinen, M. & Rautkari, L., Mar 2018, In : Wood Science and Technology. 52, 2, p. 297-329

    Research output: Contribution to journalReview ArticleScientificpeer-review

  4. Published

    The anisotropic temperature rise on wood surfaces during adsorption measured by thermal imaging

    Dupleix, A., van Nguyen, T., Vahtikari, K. & Hughes, M., Jan 2018, In : Wood Science and Technology. 52, 1, p. 167-180 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. 2017
  6. Published

    Surface modification of birch veneer by peroxide bleaching

    Yamamoto, A., Rohumaa, A., Hughes, M., Vuorinen, T. & Rautkari, L., 1 Jan 2017, In : Wood Science and Technology. 51, 1, p. 85-95 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 2016
  8. Published

    The influence of chemical degradation and polyethylene glycol on moisture-dependent cell wall properties of archeological wooden objects: a case study of the Vasa shipwreck

    Wagner, L., Almkvist, G., Bader, T. K., Bjurhager, I., Rautkari, L. & Gamstedt, E. K., 1 Nov 2016, In : Wood Science and Technology. 50, 6, p. 1103-1123 21 p.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Wood moisture content during the thermal modification process affects the improvement in hygroscopicity of Scots pine sapwood

    Altgen, M., Hofmann, T. & Militz, H., 1 Nov 2016, In : Wood Science and Technology. 50, 6, p. 1181-1195 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Wood densification and thermal modification: hardness, set-recovery and micromorphology

    Laine, K., Segerholm, K., Wålinder, M., Rautkari, L. & Hughes, M., Sep 2016, In : Wood Science and Technology. 50, 5, p. 883–894 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    The influence of log soaking temperature on surface quality and integrity performance of birch (Betula pendula Roth) veneer

    Rohumaa, A., Antikainen, T., Hunt, C. G., Frihart, C. R. & Hughes, M., 2016, In : Wood Science and Technology. 50, 3, p. 463-474 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2015
  13. Published
  14. Published

    Composition and structure of balsa (Ochroma pyramidale) wood

    Borrega, M., Ahvenainen, P., Serimaa, R. & Gibson, L., 2015, In : Wood Science and Technology. 49, 2, p. 403-420 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  15. Published

    Simultaneous measurement of lathe check depth and the grain angle of birch (Betula pendula Roth) veneers using laser trans-illumination imaging

    Antikainen, T., Eskelinen, J., Rohumaa, A., Vainio, T. & Hughes, M., 2015, In : Wood Science and Technology. 49, 3, p. 591-605 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published
  17. Published

    Thermal conductivity of wood: effect of fatigue treatment

    Mauranen, A., Ovaska, M., Koivisto, J., Salminen, L. I. & Alava, M., 2015, In : Wood Science and Technology. 49, 2, p. 359-370

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2014
  19. Published

    Chemical modification of fast-growing eucalyptus wood

    Mattos, B. D., Lourençon, T. V., Serrano, L., Labidi, J. & Gatto, D. A., 1 Jan 2014, In : Wood Science and Technology. 49, 2, p. 273-288 16 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Simultaneous drying and densification of silver birch (Betula pendula L.) veneers: analysis of morphology, thickness swelling, and density profile

    Antikainen, T., Paajanen, O., Rautkari, L., Kutnar, A., Kamke, F. A. & Hughes, M., 2014, In : Wood Science and Technology. 48, 2, p. 325-336 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. 2013
  22. Published

    Effect of fatigue and annual rings' orientation on mechanical properties of wood under cross-grain uniaxial compression

    Miksic, A., Myntti, M., Koivisto, J., Salminen, L. & Alava, M., Nov 2013, In : Wood Science and Technology. 47, 6, p. 1117-1133 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Mid-infrared absorption properties of green wood

    Dupleix, A., Meneses, D. D. S., Hughes, M. & Marchal, R., 2013, In : Wood Science and Technology. 47, 6, p. 1231-1241 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. 2012
  25. Published

    The Fracture Toughness and Properties of Thermally Modified Beech and Ash at Different Moisture Contents

    Majano-Majano, A., Hughes, M. & Fernández-Cabo, J. L., 2012, In : Wood Science and Technology. 46, 1, p. 5-21 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. 2011
  27. Published

    Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite

    Rautkari, L., Kamke, F. A. & Hughes, M., 2011, In : Wood Science and Technology. 45, 4, p. 693-705 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  28. 2010
  29. Published

    Accessibility, reactivity and supramolecular structure of E. globulus pulps with reduced xylan content

    Wollboldt, R. P., Zuckerstaetter, G., Weber, H. K., Larsson, P. T. & Sixta, H., 2010, In : Wood Science and Technology. 44, 4, p. 533-546

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Properties and set-recovery of surface densified Norway spruce and European beech

    Rautkari, L., Properzi, M., Pichelin, F. & Hughes, M., 2010, In : Wood Science and Technology. 44, 4, p. 679-691 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  31. 2009
  32. Published

    Surface modification of wood using friction

    Rautkari, L., Properzi, M., Pichelin, F. & Hughes, M., 2009, In : Wood Science and Technology. 43, p. 291-299 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. 2005
  34. Published

    Cupping of wooden cladding boards in cyclic conditions - A study of boards made of Norway spruce (Picea abies) and Scots pine sapwood (Pinus sylvestris)

    Virta, J., Koponen, S. & Absetz, I., 2005, In : Wood Science and Technology. 39, 6, p. 431-438

    Research output: Contribution to journalArticleScientificpeer-review

  35. 2004
  36. Published

    The influence of high defibration temperature on the properties of fiberboard made from laccase-treated softwood fibers

    Widsten, P., Laine, J. E., Qvintus-Leino, P. & Tuominen, S., 2004, In : Wood Science and Technology. 38, 7, p. 521-528

    Research output: Contribution to journalArticleScientificpeer-review

  37. 2003
  38. Published

    The effect of isolation method on residual lignin structure of kraft pulp

    Jääskeläinen, A-S., Sun, Y., Hortling, B., Tamminen, T. & Argyropoulos, D. S., 2003, In : Wood Science and Technology. 37, 2, p. 91-102

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    The effects of a heat treatment on the behaviour of extractives in softwood studied by FTIR spectroscopic methods

    Nuopponen, M., Vuorinen, T., Jämsä, S. & Viitaniemi, P., 2003, In : Wood Science and Technology. 37, 2, p. PP. 109-115

    Research output: Contribution to journalArticleScientificpeer-review

  40. 1996
  41. Published

    Modelling the long-term strength of timber columns.

    Ayina, O., Morlier, P., Reynouard, J. & Toratti, T., 1996, In : Wood Science and Technology. 30, 5, p. 1-10

    Research output: Contribution to journalArticleScientificpeer-review

  42. 1993
  43. Published

    Long Term Bending Creep of Wood in Cyclic Relative Humidity

    Toratti, T. & Mohager, S., 1993, In : Wood Science and Technology. 27, p. 49-59

    Research output: Contribution to journalArticleScientificpeer-review

ID: 418412