TAPPI Journal

Research outputs

  1. 2018
  2. Published

    Using online bubble size and total dissolved solids measurements to investigate the performance of oxygen delignification

    Kopra, R., Mutikainen, H. & Dahl, O., Jun 2018, In : TAPPI Journal. 17, 6, p. 343-350 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. 2017
  4. Published

    Techno-economic analysis of ECF bleaching and TCF bleaching for a bleached eucalyptus kraft pulp mill

    De Assis, T., Perrin, J., Jameel, A., Phillips, R., Lachenal, D., Kirkman, A. & Gonzalez, O., 1 Oct 2017, In : TAPPI Journal. 16, p. 583-594 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    Finite element analysis of the thermal bending of a chilled cast thermo roll

    Widmaier, T., Pirttiniemi, J., Porkka, E., Kiviluoma, P. & Kuosmanen, P., Jun 2017, In : TAPPI Journal. 16, 6, p. 346-358 13 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  6. Published

    Determining wash loss levels in the brownstock pulp washing line using different methods

    Kopra, R. & Dahl, O., May 2017, In : TAPPI Journal. 16, 5, p. 253-259 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. Published

    Novel thin functional coatings for paper by foam coating

    Kinnunen-Raudaskoski, K., Hjelt, T., Forsström, U., Sadocco, P. & Paltakari, J., Apr 2017, In : TAPPI Journal. 16, 4, p. 179-186 8 p.

    Research output: Contribution to journalReview ArticleScientificpeer-review

  8. 2016
  9. Published

    Rheological investigation of complex micro and nanofibrillated cellulose (MNFC) suspensions: Discussion of flow curves and gel stability

    Schenker, M., Schoelkopf, J., Mangin, P. & Gane, P., Jun 2016, In : TAPPI Journal. 15, 6, p. 405-416 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Biochemical methane potential of kraft bleaching effluent and codigestion with other in-mill streams

    Fitamo, T. M., Dahl, O., Master, E. & Meyer, T., 1 Feb 2016, In : TAPPI Journal. 15, 2, p. 80-88 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. 2015
  12. Published

    Dimensioning a recovery boiler furnace using mathematical optimization

    Maakala, V. & Miikkulainen, P., 1 Feb 2015, In : TAPPI Journal. 14, 2, p. 119-129 11 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    Application of pulsed ultrasound velocity profiling for measuring flow of black liquor in recovery boiler spraying nozzles

    Haavisto, S., Salmela, J., Järvinen, M. & Kankkunen, A., 2015, In : TAPPI Journal. 14, 4, p. 221-226

    Research output: Contribution to journalArticleScientificpeer-review

  14. Published

    Optimization of a brownstock washing line

    Kopra, R., Koivula, K. & Dahl, O., 2015, In : TAPPI Journal. 14, 2, p. 83-91

    Research output: Contribution to journalArticleScientificpeer-review

  15. 2013
  16. Published

    Effects of Flashing on Spray Characteristics of Splashplate Nozzles

    Karami, R., Kankkunen, A., Ashrgriz, N. & Tran, H., 2013, In : TAPPI Journal. 12, 5, p. 21-27

    Research output: Contribution to journalArticleScientificpeer-review

  17. 2012
  18. Published

    An activity-based cost calculation for kraft pulp mill

    Korpunen, H., Virtanen, P., Dahl, O., Jylhä, P. & Uusitalo, J., 2012, In : TAPPI Journal. 11, 9, p. 19-27

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Products from a larch biorefinery: Semi-bleached paper and fermentation products

    Hörhammer, H., Berezina, O., Hiltunen, E., Granström, T. & van Heiningen, A., 2012, In : TAPPI Journal. 11, 10, p. 31-39

    Research output: Contribution to journalArticleScientificpeer-review

  20. 2011
  21. Published

    Analysis of the shortness of offset ink as a function of tack on paper by comparing elastic and Hencky strain extension

    Hartus, T. & Gane, P. A. C., 2011, In : TAPPI Journal. 10, 8, p. 9-15

    Research output: Contribution to journalArticleScientificpeer-review

  22. Published

    Construction of a single bar refiner

    Rantanen, J., Hiltunen, E., Nieminen, K., Kerekes, R. & Paulapuro, H., 2011, In : TAPPI Journal. 10, 7, p. 45-51

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Contruction of a single bar refiner

    Rantanen, J., Hiltunen, E., Nieminen, K., Kerekes, R. & Paulapuro, H., 2011, In : TAPPI Journal. 10, 7, p. 45-51

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Near-neutral pre-extraction of hemicelluloses and subsequent kraft pulping of southern mixed hardwoods

    Yoon, S-H., Tunc, M. S. & van Heiningen, A., 2011, In : TAPPI Journal. 10, 1, p. 7-15

    Research output: Contribution to journalArticleScientificpeer-review

  25. Published

    Optimization of wash water usage in brown stock washing

    Kopra, R., Kari, E., Harinen, M., Tirri, T. & Dahl, O., 2011, In : TAPPI Journal. 10, 9, p. 27-33

    Research output: Contribution to journalArticleScientificpeer-review

  26. 2010
  27. Published

    Effects of impregnation time on hardwood kraft pulp characteristics and papermaking potential - a mill study

    Tolonen, L., Hiltunen, E., Helttunen, J. & Sixta, H., 2010, In : TAPPI Journal. 9, 4, p. 21-27

    Research output: Contribution to journalArticleScientificpeer-review

  28. Published

    Papermaking potential of novel structured PCC fillers with enhanced refractive index

    Koivunen, K. & Paulapuro, H., 2010, In : TAPPI Journal. 9, 1, p. 4-12

    Research output: Contribution to journalArticleScientificpeer-review

  29. 2009
  30. Published

    The Significance of Velocity in Black Liquor Spraying

    Miikkulainen, P., Kankkunen, A., Järvinen, M. & Fogelholm, C-J., 2009, In : TAPPI Journal. 8, 1, p. 36-40

    Research output: Contribution to journalArticleScientificpeer-review

  31. 2008
  32. Published

    Improvement of the fiber-bonding capacity of unbleached recycled pulp by the Laccase/Mediator Treatment

    Mocciutti, P., Zanuttini, M., Kruus, K. & Suurnakki, A., Oct 2008, In : TAPPI Journal. 7, 10, p. 17-22 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  33. Published

    Black liquor spraying experiments with six splashplate nozzles in two recovery boilers

    Miikkulainen, P., Kankkunen, A., Fogelholm, C-J., Heikkilä, V-P. & Raukola, A., 2008, In : TAPPI Journal. 7, 10, p. 23-27

    Research output: Contribution to journalArticleScientificpeer-review

  34. Published

    Influence of Mechanical Pulp Fines on Clay Retention

    Liimatainen, H., Taipale, T., Haapala, A. & Niinimäki, J., 2008, In : TAPPI Journal. 7, 12

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Surface mechanical tratment of TMP pulp fibers using grit materials

    Somboon, P. & Paulapuro, H., 2008, In : TAPPI Journal. 7, 12, p. 4-9

    Research output: Contribution to journalArticleScientificpeer-review

  36. Published

    Tailoring softwood kraft pulp properties by fractionation and refining

    El-Sharkawy, K., Koskenhely, K. & Paulapuro, H., 2008, In : TAPPI Journal. 7, 11, p. 15-22

    Research output: Contribution to journalArticleScientificpeer-review

  37. 2006
  38. Published

    Characterization of Chemical Pulp Fines

    Kang, T. & Paulapuro, H., 2006, In : TAPPI Journal. 5, 2, p. 25-28

    Research output: Contribution to journalArticleScientificpeer-review

  39. 2005
  40. Published

    Distribution of offset ink constituents in paper coating and implications for print quality

    Rousu, S., Gane, P. A. C. & Eklund, D. E., 2005, In : TAPPI Journal. 4, 7, p. 9-15

    Research output: Contribution to journalArticleScientificpeer-review

  41. Published

    Predicting droplet size from black liquor spray characteristics

    Miikkulainen, P., Kankkunen, A., Järvinen, M. P. & Fogelholm, C-J., 2005, In : TAPPI Journal. 4, 5, p. 11-17

    Research output: Contribution to journalArticleScientificpeer-review

  42. 2004
  43. Published

    Raman microscopy in lateral mapping of chemical and physical composition of paper coating

    Vyörykkä, J., Juvonen, K., Bousfield, D. & Vuorinen, T., 2004, In : TAPPI Journal. 3, 9, p. 19

    Research output: Contribution to journalArticleScientificpeer-review

  44. 2003
  45. Published

    Behavior of certain components in the vacuum drum washer after the first D stage in ECF bleaching

    Sillanpää, M., Sankari, M., Dahl, O. & Ala-Kaila, K., 2003, In : TAPPI Journal. 2, 9, p. 18-21

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    Imbibition behavior of offset inks - I: gravimetric determination of oil imbibition rate into pigmented coating structures

    Schoelkopf, J., Gane, P. A. C., Ridgway, C. J., Spielmann, D. C. & Matthews, G. P., 2003, In : TAPPI Journal. 2, 6, p. 9-13

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    Imbibition behavior of offset inks - II: gravimetric determination of vehicle imbibition rate from an offset ink into pigmented coating structures

    Schoelkopf, J., Gane, P. A. C., Ridgway, C. J., Spielmann, D. C. & Matthews, G. P., 2003, In : TAPPI Journal. 2, 7, p. 19-23

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Offset ink concentration profile during vehicle imbibition into coated paper - proposing a viscous gradient model

    Schoelkopf, J. & Gane, P. A. C., 2003, In : TAPPI Journal. 2, 8, p. on-line exclusive www.tappi.org

    Research output: Contribution to journalArticleScientificpeer-review

  49. Published

    Offset ink tack and rheology correlation - II: determining in real time the concentration of ink-on-paper using the ink tack force-time integral

    Gane, P. A. C., Schoelkopf, J. & Matthews, G. P., 2003, In : TAPPI Journal. 2, 7, p. summary pp.23-24 and on-line exclusive www.tappi.org

    Research output: Contribution to journalArticleScientificpeer-review

  50. 2001
  51. Published

    Characterization of carboxylic acids during kraft and superbatch pulping

    Buchert, J., Tenkanen, M. & Tamminen, T., 2001, In : TAPPI Journal. 84, 1, p. 70

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    High consistency forming; A new concept

    Cichoracki, T., Gullichsen, J. & Paulapuro, H., 2001, In : TAPPI Journal. 84, 3, p. 61

    Research output: Contribution to journalArticleScientificpeer-review

  53. 2000
  54. Published

    Adhesion properties of polyamide fibers used in press felts

    Kekkonen, J., Stenius, P. & Laine, H., 2000, In : TAPPI Journal. 83, 4, p. 71

    Research output: Contribution to journalArticleScientificpeer-review

  55. Published

    Analysis of Pulping Data Using the Self-Organing Map

    Alhoniemi, E., 2000, In : TAPPI Journal. 83, 7, p. 66

    Research output: Contribution to journalArticleScientificpeer-review

  56. Published

    Effect of Softwood Kraft Refining on a Mechanical-Chemical Mixture Sheet

    Hiltunen, E., Kettunen, H., Laine, J. E. & Paulapuro, H., 2000, In : TAPPI Journal. 83, 10, p. 67

    Research output: Contribution to journalArticleScientificpeer-review

  57. Published

    On the In-Plane Tear Test

    Kettunen, H. & Niskanen, K., 2000, In : TAPPI Journal. 83, 4, p. 83

    Research output: Contribution to journalArticleScientificpeer-review

  58. Published

    The effects of chemical conditions on newsprint ink detachment and fragmentation

    Pirttinen, E. & Stenius, P., 2000, In : TAPPI Journal. 83, 11, p. 72

    Research output: Contribution to journalArticleScientificpeer-review

  59. 1999
  60. Published

    Air removal mill trials using pomp deaerator

    Helle, T-MK., Meinander, P. O., Nykänen, R. J., Molander, K. S. & Paulapuro, H., 1999, In : TAPPI Journal. 82, 6, p. 146

    Research output: Contribution to journalArticleScientificpeer-review

  61. Published

    Comments on the measurement of cell wall water

    Maloney, T., Laine, J. E. & Paulapuro, H., 1999, In : TAPPI Journal. 82, 9, p. 125

    Research output: Contribution to journalArticleScientificpeer-review

  62. Published

    Mechanical pulp fines: effect of particle size and shape

    Luukko, K. & Paulapuro, H., 1999, In : TAPPI Journal. 82, 2, p. 95-101

    Research output: Contribution to journalArticleScientificpeer-review

  63. Published

    Sheet adhesion on pr ess roll materials

    Alastalo, A., Neimo, L. & Paulapuro, H., 1999, In : TAPPI Journal. 82, 6, p. 175

    Research output: Contribution to journalArticleScientificpeer-review

  64. Published

    The centrifugal compression value

    Maloney, T. & Paulapuro, H., 1999, In : TAPPI Journal. 82, 6, p. 150

    Research output: Contribution to journalArticleScientificpeer-review

  65. 1998
  66. Published

    A comparison of two test methods for estimating the fracture energy of paper

    Kärenlampi, P., Cichoracki, T., Alava, M., Pylkkö, J. & Paulapuro, H., 1998, In : TAPPI Journal. 81, 3, p. 154-160

    Research output: Contribution to journalArticleScientificpeer-review

  67. 1996
  68. Published

    Local strain fields in paper

    Korteoja, M. J., Lukkarinen, A., Kaski, K., Gunderson, D. E., Dahlke, J. L. & Niskanen, K. J., 1996, In : TAPPI Journal. 79, 4, p. 217

    Research output: Contribution to journalArticleScientificpeer-review

  69. Published

    Local Strains in Paper

    Korteoja, M., Lukkarinen, A., Kaski, K. & Niskanen, K. J., 1996, In : TAPPI Journal. 79, p. 217-223

    Research output: Contribution to journalArticleScientificpeer-review

Previous 1 2 Next

ID: 402651