Steel Research International

Research outputs

  1. 2019
  2. Published

    An Experimental Technique for Investigating the Skulling Behavior in the Blast Furnace Hearth

    Shao, L., Taskinen, P., Jokilaakso, A., Saxen, H., Qu, Y. & Zou, Z., 1 Feb 2019, In : Steel Research International. 90, 2, 4 p., 1800297.

    Research output: Contribution to journalArticleScientificpeer-review

  3. 2018
  4. Published

    An Improved Model for the Heat-Up Stage of the CAS-OB Process: Development and Validation

    Kärnä, A., Järvinen, M., Sulasalmi, P., Visuri, V. V., Ollila, S. & Fabritius, T., 1 Oct 2018, In : Steel Research International. 89, 10, 1800141.

    Research output: Contribution to journalArticleScientificpeer-review

  5. Published

    An Experimental Study on the Impact of Deoxidation Methods on the Fatigue Properties of Bearing Steels

    Gu, C., Bao, Y. P., Gan, P., Lian, J. H. & Münstermann, S., 1 Sep 2018, In : Steel Research International. 89, 9, 1800129.

    Research output: Contribution to journalArticleScientificpeer-review

  6. Published

    Grain Orientation Dependence of the Residual Lattice Strain in a Cold Rolled Interstitial-Free Steel

    Xie, Q., Gorti, S., Sidor, J. J., An, Y. G., Wang, Y. D., Lian, J., Lan, H. & An, K., 1 Mar 2018, In : Steel Research International. 89, 3, 1700408.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 2017
  8. Published

    Improving Cleanliness of 16MnCrS5 Case Hardening Steels by Optimized Active Tundish Flux

    Kekkonen, M., Holappa, L. & Leuverink, D., 4 Jul 2017, In : Steel Research International. 88, 7, 7 p., 1600364.

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

    Hietanen, P. T., Louhenkilpi, S. & Yu, S., 1 Jul 2017, In : Steel Research International. 88, 7, 1600355.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    Modeling of Chip Breakage in Machining of AISI 1045 Steel by Using an Improved Damage Mechanics Model

    Wu, B., Buchkremer, S., Münstermann, S., Lian, J., Veselovac, D., Bleck, W. & Klocke, F., 1 Jul 2017, In : Steel Research International. 88, 7, 1600338.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    A Theoretical Scaling Equation for Designing Physical Modeling of Gas–Liquid Flow in Metallurgical Ladles

    Yu, S., Zou, Z. S., Shao, L. & Louhenkilpi, S., 1 Jan 2017, In : Steel Research International. 88, 1, 1600156.

    Research output: Contribution to journalArticleScientificpeer-review

  12. 2016
  13. Published

    Characterization and Sulfuric Acid Leaching of Ferrochrome Converter (CRC) Dust

    Makkonen, H. T., Kekki, A., Heikkinen, E. P., Fabritius, T., Aromaa, J. & Forsén, O., 1 Oct 2016, In : Steel Research International. 87, 10, p. 1247-1255 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 2015
  15. Published

    CFD Modeling of a Supersonic Top Blown Lance in a CAS-OB Process: Development of Gas Heat and Mass Transfer Correlation

    Kärnä, A., Järvinen, M. & Fabritius, T., 2015, In : Steel Research International. 86, 11, p. 1370-1378

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published

    Mathematical Modeling of Nitrogen Removal from the Vacuum Tank Degasser

    Yu, S., Miettinen, J., Shao, L. & Louhenkilpi, S., 2015, In : Steel Research International. 85, 5, p. 466-477

    Research output: Contribution to journalArticleScientificpeer-review

  17. Published

    Optimization of Midrex Direct Reduced Iron Use in Ore-Based Steelmaking

    Huitu, K., Helle, M., Helle, H., Kekkonen, M. & Saxen, H., 2015, In : Steel Research International. 86, 5, p. 456-465

    Research output: Contribution to journalArticleScientificpeer-review

  18. 2014
  19. Published

    Modeling Study of Nitrogen Removal from the Vacuum Tank Degasser

    Yu, S., Miettinen, J. & Louhenkilpi, S., 2014, In : Steel Research International. 85, 9, p. 1393-1402

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published

    Pitting Corrosion Resistance of Mn-alloyed Austenitic Stainless Steels

    Pulkkinen, H., Apajalahti, H., Papula, S., Talonen, J. & Hänninen, H., 2014, In : Steel Research International. 85, 3, p. 324-335 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  21. 2013
  22. Published

    Active Tundish Slag

    Holappa, L., Kekkonen, M., Louhenkilpi, S., Hagemann, R., Schröder, C. & Scheller, P., 2013, In : Steel Research International. 84, 7, p. 638-648

    Research output: Contribution to journalArticleScientificpeer-review

  23. Published

    Effect of Inclusions and Precipitates on Hydrogen Embrittlement of Mn-Alloyed Austenitic Stainless Steels

    Pulkkinen, H., Papula, S., Todoshchenko, O., Talonen, J. & Hänninen, H., 2013, In : Steel Research International. 84, 10, p. 966-974 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  24. Published

    Optimization of Intensified Silicon Deoxidation

    Nurmi, S., Louhenkilpi, S. & Holappa, L., 2013, In : Steel Research International. 84, 4, p. 323-327

    Research output: Contribution to journalArticleScientificpeer-review

  25. 2012
  26. Published

    The Influence of Austenite Stability on Latge-strain Kinematic Hardening of Austenitic Stainless Steel steel research international

    Manninen, T., Myllykoski, P. & Korhonen, A., 2012, In : Steel Research International. special edition, p. 931-934

    Research output: Contribution to journalArticleScientificpeer-review

  27. 2011
  28. Published

    Forming and Fracture Limits of Two Metastable High-strength Austenitic Stainless Steels

    Korhonen, A., Manninen, T. & Larkiola, J., 2011, In : Steel Research International. Special issue, p. 1084-1089

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Fundamental Mathematical Model for AOD Process.Part I: Derivation of the Model

    Järvinen, M., Pisilä, S., Kärnä, A., Fabritius, T., Ikäheimonen, T. & Kupari, P., 2011, In : Steel Research International. 82, 6, p. 638-649

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published

    Fundamental Mathematical Model for AOD Process.Part II: Model validation

    Pisilä, S., Järvinen, M., Kärnä, A., Fabritius, T., Ikäheimonen, T. & Kupari, P., 2011, In : Steel Research International. 82, 6, p. 650-657

    Research output: Contribution to journalArticleScientificpeer-review

  31. Published

    Hydrogen Solubility and Diffusion in Austenitic Stainless Steels Studied with Thermal Desorption Spectroscopy

    Yagodzinskyy, Y., Todoshchenko, O., Papula, S. & Hänninen, H., 2011, In : Steel Research International. 82, 1, p. 20-25 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  32. 2010
  33. Published

    Force and Frictional Conditions in Incremental Forming

    Katajarinne, T., Komulainen, A. & Kivivuori, S., 2010, In : Steel Research International. 81, 9, p. 934-937

    Research output: Contribution to journalArticleScientific

  34. Published

    Modelling of Heat Transfer, Dendrite Microstructure and Grain Size in Continuous Casting of Steels

    Karlinski de Barcellos, V., Lopes da Silva Gschwenter, V., Kytönen, H., Alexandre dos Santos, C., Alvares Spim, J., Louhenkilpi, S. & Miettinen, J., 2010, In : Steel Research International. 81, 6, p. 461-471

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    On Physico-Chemical and Technical Limits in Clean Steel production

    Holappa, L., 2010, In : Steel Research International. 81, 10, p. 869-874

    Research output: Contribution to journalArticleScientificpeer-review

  36. 2009
  37. Published

    A Detailed Single Bubble Reaction Sub-Model for AOD Process

    Järvinen, M., Kärnä, A. & Fabritius, T., 2009, In : Steel Research International. p. 431-438

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Reduction of CO2 Emissions from steel plants by using steelmaking slags for production of marketable calcium carbonate

    Eloneva, S., Teir, S., Revitzer, H., Salminen, J., Said, A., Fogelholm, C-J. & Zevenhoven, R., 2009, In : Steel Research International. 80, 6, p. 415-421

    Research output: Contribution to journalArticleScientificpeer-review

  39. Published

    Thermodynamic evaluation of inclusions formation and behaviour in steels during casting and solidification

    Nurmi, S., Louhenkilpi, S. & Holappa, L., 2009, In : Steel Research International. 80, 6, p. 436-440

    Research output: Contribution to journalArticleScientificpeer-review

  40. 2007
  41. Published

    Energetics of Plastic Deformation of Metastable Austenitic Stainless Steels

    Talonen, J. & Hänninen, H., Mar 2007, In : Steel Research International. 78, 3, p. 260-265 6 p.

    Research output: Contribution to journalArticleScientificpeer-review

  42. Published

    Experimental study and modelling of viscosity of chromium containing slags

    Forsbacka, L., Holappa, L., Kondratiev, A. & Jak, E., 2007, In : Steel Research International. 78, 9, p. 676-684

    Research output: Contribution to journalArticleScientificpeer-review

  43. 2006
  44. Published

    Fatigue life estimation of ultrasonic impact treated welds using a local strain approach

    Lihavainen, V-M. & Marquis, G., Dec 2006, In : Steel Research International. 77, 12, p. 896-900 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  45. Published

    Improving the accuracy of structural hot-spot stress approach

    Poutiainen, I. & Marquis, G., Dec 2006, In : Steel Research International. 77, 12, p. 901-905 5 p.

    Research output: Contribution to journalArticleScientificpeer-review

  46. Published

    State-of-the-Art of Friction Stir Processing (FSP)

    Savolainen, K., Mononen, J. & Hänninen, H., May 2006, In : Steel Research International. 77, 5, p. 362-368 7 p.

    Research output: Contribution to journalArticleScientificpeer-review

  47. Published

    A Model for Predicting the Melt Temperature in the Ladle and in the Tundish as a Function of Operating Parameters during Continuous Casting

    Jormalainen, T. & Louhenkilpi, S., 2006, In : Steel Research International. 77, 7, p. 472-484

    Research output: Contribution to journalArticleScientificpeer-review

  48. Published

    Mass spectrometric measurements of the gas phase composition over mould powder samples in vacuum conditions at 50-1550 C

    Shilov, A. & Holappa, L., 2006, In : Steel Research International. 77, 11, p. 803-808

    Research output: Contribution to journalArticleScientificpeer-review

  49. 2005
  50. Published

    Oxidation State of Titanium in CaO-SiO2-TiOx Slags at 1873K

    Ariyo, C., Gonzales, P. & Holappa, L., 2005, In : Steel Research International. 76, 4, p. 286-289

    Research output: Contribution to journalArticleScientificpeer-review

  51. 2003
  52. Published

    Control of ejections caused by bubble bursting in steelmaking processes

    Müller, K. T., Holappa, L. & Neuschütz, D., 2003, In : Steel Research International. 74, 2

    Research output: Contribution to journalArticleScientificpeer-review

  53. 2001
  54. Published

    Formation of metal droplets from gas bubbles bursting on iron melt

    Han, Z. & Holappa, L., 2001, In : Steel Research International. 72, 11+12, p. 434-438

    Research output: Contribution to journalArticleScientificpeer-review

ID: 396323