Nordic Pulp and Paper

Research outputs

  1. 2019
  2. Published

    Nano-lignocellulose from recycled fibres in coatings from aqueous and ethanolic media: Effect of residual lignin on wetting and offset printing quality

    Imani, M., Ghasemian, A., Dehghani-Firouzabadi, M. R., Afra, E., Gane, P. A. C. & Rojas, O. J., Jun 2019, In : Nordic Pulp and Paper Research Journal. 34, 2, p. 200-210 11 p.

    Research output: Contribution to journalArticle

  3. 2018
  4. Published

    Impact of non-uniform water absorption on water-interference print mottle in offset printing

    Thorman, S., Ström, G. & Gane, P. A. C., 26 Mar 2018, In : Nordic Pulp and Paper Research Journal. 33, 1, p. 150-163 14 p.

    Research output: Contribution to journalArticle

  5. Published

    Phosphorescence and fluorescence of fibrillar cellulose films

    Grönroos, P., Bessonoff, M., Salminen, K., Paltakari, J. & Kulmala, S., 2018, In : Nordic Pulp and Paper Research Journal. 33, 2, p. 246-255

    Research output: Contribution to journalArticle

  6. 2017
  7. Published

    Editorial: From understanding the biological function of lignin in plants to production of colloidal lignin particles

    Osterberg, M., Sipponen, M. H. & Henriksson, G., 2017, In : Nordic Pulp & Paper Research Journal. 32, 4, p. 483-484 2 p.

    Research output: Contribution to journalEditorial

  8. Published

    Impact of fountain solution addition level on tack and optical properties of the print of a mechanically distributed water-in-oil thin film emulsion

    Tåg, C-M., Silfsten, P., Peiponen, K-E., Gane, P. & Ridgway, C., 2017, In : Nordic Pulp and Paper Research Journal. 32, 3, p. 436-443 8 p.

    Research output: Contribution to journalArticle

  9. Published

    Improving the optical performance of the nanostructured starch-calcium carbonate hybrid pigments

    Kuusisto, J. & Maloney, T. C., 2017, In : Nordic Pulp & Paper Research Journal. 32, 2, p. 211-221 11 p.

    Research output: Contribution to journalArticle

  10. Published

    Scaling up production of colloidal lignin particles

    Leskinen, T., Smyth, M., Xiao, Y., Lintinen, K., Mattinen, M-L., Kostiainen, M. A., Oinas, P. & Osterberg, M., 2017, In : Nordic Pulp & Paper Research Journal. 32, 4, p. 586-596 11 p.

    Research output: Contribution to journalArticle

  11. Published
  12. Published

    Strengthening wood fiber networks by adsorption of complexes of chitosan with dialdehyde starch

    Korhonen, M. H. J., Cunha, G., Koponen, R., Hirvonen, K. & Rojas, O. J., 2017, In : Nordic Pulp & Paper Research Journal. 32, 4, p. 683-690 8 p.

    Research output: Contribution to journalArticle

  13. Published

    Structural changes of lignin in biorefinery pretreatments and consequences to enzyme-lignin interactions

    Sipponen, M., Rahikainen, J., Leskinen, T., Pihlajaniemi, V., Mattinen, M-L., Lange, H., Crestini, C. & Österberg, M., 2017, In : Nordic Pulp & Paper Research Journal. 32, 4, p. 547-568

    Research output: Contribution to journalArticle

  14. Published

    The effect of chemical additives on the strength, stiffness and elongation potential of paper

    Strand, A., Khakalo, A., Kouko, J., Oksanen, A., Ketola, A., Salminen, K., Rojas, O., Retulainen, E. & Sundberg, A., 2017, In : Nordic Pulp & Paper Research Journal. 32, 3, p. 324-335 12 p.

    Research output: Contribution to journalArticle

  15. 2016
  16. Published

    The fractal characteristic of porous coatings prepared with ground calcium carbonate

    Liu, G., Lu, Z., Zhang, M., Ridgway, C. & Gane, P., 2016, In : Nordic Pulp and Paper Research Journal. 31, 4, p. 668-675 8 p.

    Research output: Contribution to journalArticle

  17. 2015
  18. Published
  19. Published
  20. Published

    A simple model for cellulose solubility in supercritical water

    Wohlert, J., Tolonen, L. K. & Bergenstråhle-Wohlert, M., 2015, In : Nordic Pulp and Paper Research Journal. 30, 1, p. 14-19 6 p.

    Research output: Contribution to journalArticle

  21. Published

    Heat-Induced Changes in Oil and Grease Resistant Hydroxypropylated-Starch-Based Barrier Coatings

    Ovaska, S. S., Geydt, P., Österberg, M., Johansson, L-S. & Backfolk, K., 2015, In : Nordic Pulp and Paper Research Journal. 30, 3, p. 488-496 9 p.

    Research output: Contribution to journalArticle

  22. Published

    Improving the extensibility of paper: Sequential spray addition of gelatine and agar

    Vishtal, A., Khakalo, A., Rojas, O. & Retulainen, E., 2015, In : Nordic Pulp and Paper Research Journal. 30, 3, p. 452-460

    Research output: Contribution to journalArticle

  23. Published

    Ioncell-F: A High-strength regenerated cellulose fibre

    Sixta, H., Michud, A., Hauru, L., Asaadi, S., Ma, Y., King, A. W. T., Kilpeläinen, I. & Hummel, M., 2015, In : Nordic Pulp and Paper Research Journal. 30, 1, p. 43-57

    Research output: Contribution to journalArticle

  24. Published

    Tailor-made hemicellulose-based hydrogels reinforced with nanofibrillated cellulose

    Dax, D., Chávez Bastidas, M. S., Honorato, C., Liu, J., Spoljaric, S., Seppälä, J., Mendonca, R. T., Xu, C., Willför, S. & Sánchez, J., 2015, In : Nordic Pulp and Paper Research Journal. 30, 3, p. 373-384 12 p.

    Research output: Contribution to journalArticle

  25. Published

    Vapor pressure and boiling point elevation of black liquor

    Järvinen, M., Kankkunen, A., De Blasio, C. & Miikkulainen, P., 2015, In : Nordic Pulp and Paper Research Journal. 30, 3, p. 411-416 6 p.

    Research output: Contribution to journalArticle

  26. Published

    Vapor Pressure of Water in Black Liquor

    Järvinen, M., Kankkunen, A., De Blasio, C. & Miikkulainen, P., 2015, In : Nordic Pulp and Paper Research Journal. 30, 3

    Research output: Contribution to journalArticle

  27. 2014
  28. Published

    An Evaluation Method for Print Mottle using Wavelet Denoising and Image Grey Level Gradient

    Liu, G., Zhang, M., Chen, Y., Leng, C. & Gane, P., 2014, In : Nordic Pulp and Paper Research Journal. 29, 2, p. 280-285

    Research output: Contribution to journalArticle

  29. Published

    An evaluation method for print mottle using wavelet denoising and image grey level intensity gradient

    Liu, G., Zhang, M., Wang, Q., Chen, Y., Lin, X. & Gane, P., 2014, In : Nordic Pulp and Paper Research Journal. 29, 2, p. 280-285 6 p.

    Research output: Contribution to journalArticle

  30. Published
  31. Published

    Comparison of two conditioning schemes for detoxifying SO2-ethanol-water hydrolysate from lignocellulosics for ABE fermentation

    Sklavounos, E., Iakovlev, M., Survase, S., Gouveia, S., Moldes, D., Sanroman, M. A. & van Heiningen, A., 2014, In : Nordic Pulp and Paper Research Journal. 29, 3, p. 370-382

    Research output: Contribution to journalArticle

  32. Published

    Flocculation and retention of fillers with nanocelluloses

    Korhonen, M. H. J. & Laine, J., 2014, In : Nordic Pulp & Paper Research Journal. 29, 1, p. 119-128 10 p.

    Research output: Contribution to journalArticle

  33. Published

    Modeling of mass transfer and degradaation of hemicelluloses in flow-through hot water extraction

    Liu, Z., Ahmad, W., Kuitunen, S. & Alopaeus, V., 2014, In : Nordic Pulp and Paper Research Journal. 4, 29, p. 568-583

    Research output: Contribution to journalArticle

  34. Published

    Special issue on nanocellulose

    Österberg, M. & Cranston, E. D., 2014, In : Nordic Pulp & Paper Research Journal. 29, 1, 2 p.

    Research output: Contribution to journalEditorial

  35. Published

    The combination of spray and blade coating: Method development and validation on Cylindrical Laboratory Coater

    Salo, T., Sundholm, P. & Paltakari, J., 2014, In : Nordic Pulp and Paper Research Journal. 29, 4, p. 760-767

    Research output: Contribution to journalArticle

  36. 2013
  37. Published

    Approaching super-hydrophobicity from cellulosic materials: A Review

    Song, J. & Rojas, O. J., 2013, In : Nordic Pulp and Paper Research Journal. 28, 2, p. 216-238

    Research output: Contribution to journalReview Article

  38. Published

    Brightness reduction of calcium carbonate and calcium sulfate fillers in the wet end of a paper machine

    Varhimo, P., Konn, J., Lillandt, M. & Paltakari, J., 2013, In : Nordic Pulp and Paper Research Journal. 28, 1, p. 59-67

    Research output: Contribution to journalArticle

  39. Published

    Brightness reduction of mechanical pulp in the wet end of a paper machine: The effect of pH, pulp washing and shear rate

    Varhimo, P., Konn, J., Lillandt, M. & Paltakari, J., 2013, In : Nordic Pulp and Paper Research Journal. 28, 1, p. 51-58

    Research output: Contribution to journalArticle

  40. Published
  41. Published

    Designing nanotechnology coatings for replacement of fibrous white top liner

    Ridgway, C. J., Weihs, J., Grossmann, O., Hunziker, P. & Gane, P. A. C., 2013, In : Nordic Pulp and Paper Research Journal. 28, 4, p. 560-572

    Research output: Contribution to journalArticle

  42. Published

    Displacement washing of TEMPO-oxidized softwood kraft pulp: Effects of change in fiber properties

    Brodin, F. W., Sonavane, Y. & Sedin, M., 2013, In : Nordic Pulp and Paper Research Journal. 28, 3

    Research output: Contribution to journalArticle

  43. Published

    Flocculation of fillers with polyelectrolyte complexes

    Korhonen, M. H. J., Holappa, S., Stenius, P. & Laine, J., 2013, In : Nordic Pulp and Paper Research Journal. 28, 2, p. 239-247

    Research output: Contribution to journalArticle

  44. Published

    Press dewatering and nip rewetting of paper containing nano- and microfibril cellulose

    Rantanen, J. & Maloney, T., 2013, In : Nordic Pulp and Paper Research Journal. 28, 4, p. 582-587

    Research output: Contribution to journalArticle

  45. Published

    Testing an activity-based costing model with a virtual paper mill

    Korpunen, H. & Paltakari, J., 2013, In : Nordic Pulp and Paper Research Journal. 28, 1, p. 146-155

    Research output: Contribution to journalArticle

  46. 2012
  47. Published

    Brightness reduction of mechanical pulp in the wet end of a paper machine: Method development and validation

    Varhimo, P., Konn, J., Lillandt, M. & Paltakari, J., 2012, In : Nordic Pulp and Paper Research Journal. 27, 3, p. 542-549

    Research output: Contribution to journalArticle

  48. Published

    Determination of phenomena involved in impregnation of softwood chips. Part 1. Method for calculating the true penetration degree

    Maattanen, M. & Tikka, P., 2012, In : Nordic Pulp & Paper Research Journal. 27, 3, p. 550-558 9 p.

    Research output: Contribution to journalArticle

  49. Published
  50. Published
  51. Published
  52. Published
  53. Published

    Modeling the rheology of nanocellulose suspensions

    Puisto, A., Illa Tortos, X., Mohtaschemi, M. & Alava, M., 2012, In : Nordic Pulp and Paper Research Journal. 27, 2, p. 277-281 5 p.

    Research output: Contribution to journalArticle

  54. Published
  55. Published

    Online detection of moisture in heatset printing: liquid transfer to printed image and non-image areas

    Tåg, C-M., Toivainen, M., Juuti, M. & Gane, P., 2012, In : Nordic Pulp and Paper Research Journal. 27, 1, p. 112-121

    Research output: Contribution to journalArticle

  56. Published
  57. Published
  58. Published

    The effect of coating pore structure and geometry on the drying efficiency of heatset web-offset ink solvent

    Gerstner, P. M., Zhang, H. & Gane, P. A. C., 2012, In : Nordic Pulp and Paper Research Journal. 27, 4, p. 750-756

    Research output: Contribution to journalArticle

Previous 1 2 3 4 Next

ID: 349761