Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Research outputs

  1. 2019
  2. Published

    Behavior of Ga, In, Sn, and Te in Copper Matte Smelting

    Sukhomlinov, D., Klemettinen, L., O’Brien, H., Taskinen, P. & Jokilaakso, A., 1 Dec 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50, 6, p. 2723-2732 10 p.

    Research output: Contribution to journalArticleScientificpeer-review

  3. Published

    Optimization of CCT Equations Using Calculated Grain Boundary Soluble Compositions for the Simulation of Austenite Decomposition of Steels

    Miettinen, J., Koskenniska, S., Somani, M., Louhenkilpi, S., Pohjonen, A., Larkiola, J. & Kömi, J., 1 Dec 2019, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 50, 6, p. 2853-2866 14 p.

    Research output: Contribution to journalArticleScientificpeer-review

  4. Published
  5. 2018
  6. Published

    Precious Metal Distributions in Direct Nickel Matte Smelting with Low-Cu Mattes

    Piskunen, P., Avarmaa, K., O’Brien, H., Klemettinen, L., Johto, H. & Taskinen, P., Feb 2018, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 49, 1, p. 98-112 15 p.

    Research output: Contribution to journalArticleScientificpeer-review

  7. 2017
  8. Published

    A Gibbs Energy Minimization Approach for Modeling of Chemical Reactions in a Basic Oxygen Furnace

    Kruskopf, A. & Visuri, V-V., Dec 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. p. 3281–3300

    Research output: Contribution to journalArticleScientificpeer-review

  9. Published

    A Mathematical Model for Reactions During Top-Blowing in the AOD Process: Derivation of the Model

    Visuri, V-V., Järvinen, M., Kärnä, A., Sulasalmi, P., Heikkinen, E-P., Kupari, P. & Fabritius, T., 1 Jun 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 3, p. 1850-1867 18 p.

    Research output: Contribution to journalArticleScientificpeer-review

  10. Published

    A Mathematical Model for Reactions During Top-Blowing in the AOD Process: Validation and Results

    Visuri, V-V., Järvinen, M., Kärnä, A., Sulasalmi, P., Heikkinen, E-P., Kupari, P. & Fabritius, T., 1 Jun 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 3, p. 1868-1884 17 p.

    Research output: Contribution to journalArticleScientificpeer-review

  11. Published

    Effect of Rice Husk Ash Insulation Powder on the Reoxidation Behavior of Molten Steel in Continuous Casting Tundish

    Kim, T. S., Chung, Y., Holappa, L. & Park, J. H., 1 Jun 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 3, p. 1736-1747 12 p.

    Research output: Contribution to journalArticleScientificpeer-review

  12. Published

    A 2D Axisymmetric Mixture Multiphase Model for Bottom Stirring in a BOF Converter

    Kruskopf, A., Feb 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 1, p. 619-631 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  13. Published

    MTDATA and the Prediction of Phase Equilibria in Oxide Systems: 30 Years of Industrial Collaboration

    Gisby, J., Taskinen, P., Pihlasalo, J., Li, Z., Tyrer, M., Pearce, J., Avarmaa, K., Björklund, P., Davies, H., Korpi, M., Martin, S., Pesonen, L. & Robinson, J., 2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 1, p. 91–98 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  14. 2016
  15. Published

    A Mathematical Model for the Reduction Stage of the CAS-OB Process

    Sulasalmi, P., Visuri, V. V., Kärnä, A., Järvinen, M., Ollila, S. & Fabritius, T., Dec 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 6, p. 3544–3556 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  16. Published
  17. Published

    Studies on Interfacial Phenomena in Titanium Carbide/Liquid Steel Systems for Development of Functionally Graded Material

    Kiviö, M., Holappa, L., Louhenkilpi, S., Nakamoto, M. & Tanaka, T., Aug 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 4, p. 2114–2122 9 p.

    Research output: Contribution to journalArticleScientificpeer-review

  18. Published

    Aluminum Deoxidation Equilibria in Liquid Iron - PartIII. Experiments and Thermodynamic Modeling of the Fe-Mn-Al-O system

    Paek, M., Do, K-H., Kang, Y-B., Jung, I-H. & Pak, J-J., 21 Jun 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47B, 5, p. 2837-2847

    Research output: Contribution to journalArticleScientificpeer-review

  19. Published

    Thermodynamics of Nitrogen in Fe-Mn-Al-Si-C Alloy Melts

    Paek, M. K., Chatterjee, S., Pak, J. J. & Jung, I. H., 1 Apr 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 2, p. 1243-1262 20 p.

    Research output: Contribution to journalArticleScientificpeer-review

  20. Published
  21. Published

    Experimental Determination of the Liquidus Surface of the Cu-O-ZnO-CaO System in Equilibrium with Air

    Xia, L., Liu, Z. & Taskinen, P., 2016, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 47, 6, p. 3413–3420 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  22. 2015
  23. Published

    A Model for Scrap Melting in Steel Converter

    Kruskopf, A., 2015, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 46, 3, p. 1195-1206

    Research output: Contribution to journalArticleScientificpeer-review

  24. 2014
  25. Published

    Mechanical and thermal properties of pulsed electric current sintered (PECS) Cu-diamond compacts

    Ritasalo, R., Kanerva, U., Ge, Y. & Hannula, S-P., Apr 2014, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45, 2, p. 489-496 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  26. Published

    Investigation of the Freeze-Lining Formed in an Industrial Copper Converting Calcium Ferrite Slag

    Fallah-Mehrjardi, A., Jansson, J., Taskinen, P., Hayes, P. C. & Jak, E., 2014, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 45B, (3), p. 864-874

    Research output: Contribution to journalArticleScientificpeer-review

  27. 2013
  28. Published

    Computational Fluid Dynamics (CFD) Investigation of Submerged Combustion Behavior in a Tuyere Blown Slag-fuming Furnace

    Huda, N., Naser, J., Brooks, G., Reuter, M. A. & Matusewicz, R. W., 2013, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 43, 5, p. 1054-1068

    Research output: Contribution to journalArticleScientificpeer-review

  29. Published

    Experimental Study on the Phase Diagram of the Fe-O-S System

    Johto, H., Henao, H. M., Jak, E. & Taskinen, P., 2013, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 44, 6, p. 1364-1370

    Research output: Contribution to journalArticleScientificpeer-review

  30. Published
  31. 2012
  32. Published
  33. 2011
  34. Published

    Transient Inclusion Evolution During Modification of Alumina Inclusions by Calcium in Liquid Steel: Part I.Background, Experimental Techniques and Analysis Methods

    Verma, N., Pistorius, P. C., Fruehan, R. J., Potter, M., Lind, M. & Story, S., 2011, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 42, 4, p. 711-719

    Research output: Contribution to journalArticleScientificpeer-review

  35. Published

    Transient Inclusion Evolution During Modification of Alumina Inclusions by Calcium in Liquid Steel: Part II.Results and Discussion

    Verma, N., Pistorius, P. C., Fruehan, R. J., Potter, M., Lind, M. & Story, S. R., 2011, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 42, 4, p. 720-729

    Research output: Contribution to journalArticleScientificpeer-review

  36. 2010
  37. Published

    Transformation of Alumina Inclusions by Calcium Treatment

    Lind, M. & Holappa, L., Apr 2010, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 41, 2, p. 359-366 8 p.

    Research output: Contribution to journalArticleScientificpeer-review

  38. Published

    Addition of Dispersoid Titanium Oxide Inclusions in Steel and Their Influence on Grain Refinement

    Holappa, L., Iung, T. & Kiviö, M., 2010, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 41, 6, p. 1194-1204

    Research output: Contribution to journalArticleScientificpeer-review

  39. 2008
  40. Published

    Measurement of surface tension of solid Cu by improved multiphase equilibrium

    Nakamoto, M., Liukkonen, M., Friman, M., Heikinheimo, E., Hämäläinen, M. & Holappa, L., 2008, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 39, 4, p. 570-580

    Research output: Contribution to journalArticleScientificpeer-review

  41. 2004
  42. Published

    Nickel droplet settling behavior in an electric furnace

    Xia, J., Kankaanpää, T. & Ahokainen, T., 2004, In : Metallurgical and Materials Transactions B. 35, B, p. 839-845

    Research output: Contribution to journalArticleScientificpeer-review

  43. 2003
  44. Published

    Bubble bursting Phenomenon in Gas/Metal//Slag Systems

    Han, Z. & Holappa, L., 2003, In : Metallurgical and Materials Transactions B. 34B, 5, p. 525-532

    Research output: Contribution to journalArticleScientificpeer-review

  45. 2002
  46. Published

    Oxidation State and Activities of Chromium Oxides in CaO-SiO2-CrOx Slag System

    Xiao, Y., Holappa, L. & Reiter, M. A., 2002, In : Metallurgical and Materials Transactions B. 33B, p. 595-603

    Research output: Contribution to journalArticleScientificpeer-review

  47. 2001
  48. Published
  49. Published

    Transient flow and heat transfer in a steelmaking ladle during the holding period

    Xia, J. & Ahokainen, T., 2001, In : Metallurgical and Materials Transactions B. 32B, p. 733-741

    Research output: Contribution to journalArticleScientificpeer-review

  50. 2000
  51. Published

    Microscale Simulation of Settler Processes in Copper Matte Smelting

    Fagerlund, K. & Jalkanen, H., 2000, In : Metallurgical and Materials Transactions B. 31, 3, p. 439-451 13 p.

    Research output: Contribution to journalArticleScientificpeer-review

  52. Published

    Thermodynamic-Kinetic Simulation of Constrained Dendrite Growth in Steels

    Miettinen, J., 2000, In : Metallurgical and Materials Transactions B. 31B, 4, p. 365-379

    Research output: Contribution to journalArticleScientificpeer-review

  53. 1999
  54. Published

    Mathematical modelling of copper and brass upcasting

    Miettinen, J. & Härkki, K., 1999, In : Metallurgical and Materials Transactions B. 30B, p. 75-98

    Research output: Contribution to journalArticleScientificpeer-review

  55. 1997
  56. Published

    Calculation of Solidification-Related Thermophysical Properties for Steels

    Miettinen, J., 1997, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 28B, p. 281-297

    Research output: Contribution to journalArticleScientificpeer-review

  57. 1994
  58. Published

    Calculation of thermophysical properties of carbon and low alloyed steels for modelling of solidification processes

    Louhenkilpi, S., 1994, In : Metallurgical and Materials Transactions B. 25B, 12, p. 909-916

    Research output: Contribution to journalArticleScientificpeer-review

ID: 338672